Strangely I am able to fix it by clearing data and enabling option for using Samsung Pay (even though I don't and have it disabled.) I guess whatever option you are toggling with that prompt is the culprit!I said I am not able to replicate this bug and I am requesting for a screen recording so I can look closer and investigate.
Pls send me list of emulators app you use. Thank you.Tribalfs is there any chance you can make an exception list for emulators built in to the app? No Tasker needed kind of thing. I would like to use the 46hz minimum but it brakes emulators causing them to lag not being able to hit full 30fps or 60fps when 48hz is enabled. I really would like to see an inbuilt solution.
RetroArch, Citra MMJ, Citra, Dolphin MMJR, Dolphin MMJ, Dolphin, PPSSPP, Drastic, Skyline, Egg NS, Play!, Mirage and a few other well knowns besides that. Those are the main IMPORTANT ONES. I would greatly appreciate this and it will also improve overall user experience.Pls send me list of emulators app you use. Thank you.
Check v7.10.21, I made some fixes related to this.Thanks. The reason I'm still doing this now (in latest GMH version) is because I still notice the reading is 60.000x Hz in Force lowest HZ (after screen off for sometime then on) when I'm on standard refresh mode. Probably because sometimes the automated power saving + standard refresh mode tasks kick in when my phone screen is off and idle and GMH is not able to force it to 48Hz by then. Not sure. But right now I will live with this, not a big issue
I tested nova launcher and adaptive mode is working when launching and closing app.
v7.10.21 is just the same as v7.10.20 but with minor fixes on sliders behavior. v7.10.21 should be better - try to clear app data if you are experiencing issues after update.The previous version was better,idk what changes was done but 7.10.20 was very good
I tested nova launcher and adaptive mode is working when launching and closing app.
Don't use the built-in screen recorder, IT WILL ALWAYS LOCK TO 60HZ DURING RECORDING. Check FAQs on the recommended screen recording app and also show your gmh settings in the screen recording. Also first check if you disabled appear on top permission, that can be the cause.
Your app is bugged on S20 FE on Adaptive mode. Zooming in and out from Recent Apps screen and scrolling between apps with the buttons on there is locked to 60hz, when my finger touches the screen anywhere else it pops up to 120hz. Appear on top is enabled ... I'll re record with your favourite app today.Don't use the built-in screen recorder, IT WILL ALWAYS LOCK TO 60HZ DURING RECORDING. Check FAQs on the recommended screen recording app and also show your gmh settings in the screen recording. Also first check if you disabled appear on top permission, that can be the cause.
I am not able to reproduce issues you are experiencing on my S20 FE 5G.Your app is bugged on S20 FE on Adaptive mode. Zooming in and out from Recent Apps screen and scrolling between apps with the buttons on there is locked to 60hz, when my finger touches the screen anywhere else it pops up to 120hz. Appear on top is enabled ... I'll re record with your favourite app today.
EDIT: you can see that recents and back button don't trigger Adaptive yes? Clean install, cleared data etc etc etc ...
That's not Nova Launcher which I think may be the issue.I am not able to reproduce issues you are experiencing on my S20 FE 5G.
I always do a clean install, i.e. uninstall previous app and reinstall new version and setup again. Note that "clearing data" seems to still provide issues for me, strange?. Also, I do not use the "show real-time refresh rate" from the app as I have found it to behave erratically in the past and I use the system refresh rate instead.
Great App! However found following weird issue. If this app is ON in installed services, then the xbox wireless controller will not work with Mantis Gamepad Pro app (it stops recognizing buttons, etc). Just sharing in case it happens to someone else
I have a problem with my Xbox wireless Controller in games when Galaxy Max Hz service is enabled - for example sticks are not working. When I turn it off in Settings->Accessibility->Installed services->Galaxy Max Hz everything works perfectly fine. Is there any way to fix that?
Edit: I have also tried with PS4 controller and it behaves exactly the same.
I have s20 fe 5g.
Sounds like a similar issue I was having with Nvidia Games not recognizing gamepad inputs when galaxy mhz accessibility option is enabled
Well, dev ops overlay was indicating 60hz while notification was indicating 96hz. Had a go at it again. This time I've done a reboot after granting adb. So far so good since mondayIf it indicates 96, then it's probably 96. You can double check it with the built-in refresh rate monitor in the developer options.
|About this app:|
|- More customizable maintenance window interval for Quick-Doze Mode|
|- Added turn-off autosync option under screen-off mods|
|- Separate max hz settings for power saving mode|
|- Automate GMH settings using Tasker plugin support. Supported actions/variables: Max Refresh Rate, Keep Motion Smoothness on PSM, Motion Smoothness Mode, Quick-doze Mod, Change Screen Resolution.|
|- Some code refactoring and optimizations|
|- `Keep motion smoothness on power saving mode` will now take effect immediately after toggle|
|- Filter what resolutions to include in the screen resolution switcher|
|- Power saving mode and deep-doze are now separate options under screen-off mods|
|- Adaptive or high motion smoothness on CQHD+ resolution now sticks after reboot.|
|'-Adjustments on doze mode to prevent it from being interrupted by significant motion. This should improve doze performance when the device is constantly in pocket or in motion.|
|- Additional doze option with no maintenance window added|
|- Added option to keep motion smoothness on power saving mode - either enabled manually or by the system/adaptive power saving|
|- Trial workaround to prevent Samsung Pay crash (v6.63.50)|
|- Other minor bug fixes|
|- Quick power-doze mod adjustments for more power saving on idle. There are now two options available: Moderate and Aggressive|
|- Adaptive mod improvements - fixed behavior in Samsung notes and when using instagram voice note|
|- Added option to hide Net Speed in the app's main screen to those who don't need it.|
|- Fixed crash when opening some apps in Secured Folder|
|- Minor improvements on adaptive mod|
|- Fixed intermittent bug on restoring power mode settings on screen-on when using quick power-doze mod|
|- Fixed bug on refresh rate profiles not properly loading on some devices. Known profiles are now being loaded from the server if connected to internet or locally from profiles included in the apk - upon first opening the app or after clear data.|
|- Adaptive mod improvements for games and video payback|
|- Other bug fixes|
|- Improvements on Italian translations|
|- Please advise if not all refresh rates are working on your device so I can modify the profile in my server|
|Clearing app data is recommended if your device has issue on loading refresh rate profiles|
|- Improvements on adaptive mod behavior for multi-refresh rates devices not natively supporting adaptive refresh rates (fixed issues on prolonged scroll, mouse scroll, not working on settings, etc.)|
|- Set minimum refresh rate for adaptive mode to 60hz or lower (if available)|
|- Net speed indicator now autohides when not connected to internet|
|- More optimizations|
|- Other improvements and bug fixes|
|- Experimental Adaptive refresh rate mod working for Samsung devices supporting multiple refresh rates (e.g. S20/S20+/S20Ultra,S20FE) (only available for Ad-free)|
|- Quick power-doze mod: Automatic power saving mode and quick doze mode on screen-off (only available for Ad-free)|
|- Fixed high mode not working on some S21/N20U devices|
|- Show real-time refresh rate in notification and/or overlay|
|- Added some language support|
|- Improve notifications|
|- App power consumption improvement|
|- 7-day ad-free trial is available for you to test. Just click "Activate Ad-free" button and click "More info" on the snackbar prompt that will appear Ad-free trial added|
|- Stability and other improvements|
The program is very much in conflict with bank programs where the entrance is through a fingerprint. The phone starts to hang very much. Latest version of the program
The link to the latest version isn't working.
@tribalfs Thanks for all your work, amazing app!
I'm having some issue with S21 ultra v6.61 the app is detecting my lowest hz differently each time sometime it detects 60 sometimes 120 (although the actual should be 10).
Also is there an option to set a specific hz for certain app?
Could you post the link for 6.61.02! Updating through your app gives the error "there was a problem parsing the package".
Since last Android Update unuseable.
Can't switch to ,,Adaptive". Can't even set it to 96hz. I will revert back to 5.30.... That works... but 48hz will be out 4ever i think
Does this version fix the issues ? Safe to install? And thank you
No more adaptive refresh rate..allready do the ADB commands and "trial" it was once then gone forever tried to force stop and clear app data..please help
Same here, I think the dev mentioned that screen profiles aren't being loaded properly but the link seems to be broken to the update that fixes the issue. All we can do is be patient for now. I tried to get back 48hz by wiping and uninstalling but that broke adaptive for me as well
|- Fixed bug on refresh rate profiles not properly loading(bug inroduced in v6.61)|
|Clearing app data is highly recommended after this update|