[App]Galaxy Max Hz (Refresh Rate Mods, Screen-off Mods and More)

Search This thread

tribalfs

Senior Member
Mar 28, 2014
1,739
1,312
v7.12.20 in-app update is now available. :)
- Fixed intermittent bugs:
- Power saving mode on screen-off: PSM not turning off back on screen on.
- Turn-off autosync on screen off: autosync not turning on back on screen on

Hello, i have S20 FE 5G (SD) and see only 60 or 120 Hz, not have 96 Hz ??
Possible to future ?? 120Hz its not good :(
96Hz is not supported/enabled in S20 FE 5G.
 
  • Like
Reactions: KiranGadge911

tribalfs

Senior Member
Mar 28, 2014
1,739
1,312
v7.13.00 in-app update now up.

tribalfs said:
v7.13
Anti-flicker: added minimum brightness threshold for Adaptive mod similar to the native one. When the device's display brightness falls below the set minimum brightness threshold, adaptive mod will pause and will resume once the brightness increases again above the threshold. This is for devices who are experiencing flickers when refresh rate switches at certain low brightness level.
Stability and bug fixes
 
  • Like
Reactions: android_htc

tribalfs

Senior Member
Mar 28, 2014
1,739
1,312
v7.14.12 in-app update now available.
-fixed force close when app is installed first time


v7.14.10 in-app update now available :)

-48hz on force lowest on screen off/AOD now works on S20/+/Ultra on any refresh rate mode
-improvements on brightness threshold for adaptive mod performance(anti-flicker)
-added quick settings tille to toggle min hz for adaptive mod on supported devices
-added tasker option to toggle min hz for adaptive mod on supported devices
-other fixes
 
Last edited:

tribalfs

Senior Member
Mar 28, 2014
1,739
1,312
v7.14.13 in-app update now available.

-Added option to prevent system from switching back to high mode when adaptive mod is applied (for S20 series and FE). E.g. when using bixby routine to switch motion smoothness mode
-Bug fixes
 
  • Like
Reactions: KiranGadge911

Delvekk

Member
Feb 26, 2014
12
1
v7.14.13 in-app update now available.

-Added option to prevent system from switching back to high mode when adaptive mod is applied (for S20 series and FE). E.g. when using bixby routine to switch motion smoothness mode
-Bug fixes
Hi, I noticed that the issue with not properly working XBOX controller when Galaxy Max Hz service is enabled came back. Not sure from which version, but it's not possible to use it.
Could you please take a look on that?
 

ZFGFade

Member
Oct 4, 2018
48
5
How could I get 96hz on S20 FE 5G latest update (One UI 3.1 October security patch), is it still possible? Because all methods I've tried failed. I have TWRP and Magisk root btw
 
Last edited:

ArtOne26

New member
Jan 13, 2022
3
1
v7.14.13 in-app update now available.

-Added option to prevent system from switching back to high mode when adaptive mod is applied (for S20 series and FE). E.g. when using bixby routine to switch motion smoothness mode
-Bug fixes
Friend tell me if there will be a program update that will enable 120 hertz in energy saving mode for s20 fe on oneui 4?
 

tribalfs

Senior Member
Mar 28, 2014
1,739
1,312
v7.14.18 in-ap update:
-Fixed bugs on OneUi4.0: brightness threshold for adaptive mod bug, netspeed indicator bug
-Fixed bug on minimum hz tile and minimum hz tile tasker command
-Improved Russian translations
-Minor stability fixes


v7.14.17 in-app update now available
-Auto sensors off workaround for OneUI4.0
-Fixed bug: setting min hz for adaptive (%lhz) usingTasker not working
-Fixed bug: unable to turn off accessibility when no feature requiring such is enabled
-experimental workaround for enabling Adaptive/High refresh rate on PSM on OneUI4.0
- other stability fixes
 

Fatalise

Member
Jan 14, 2022
14
6
Amazing app ! I'll definitely buy after I see how it behaves with one UI4
Only thing i noticed is that screen corners are more curved (check the pic), thus hiding a bit of display when in HD+ res on S20FE exynos (I could live with that btw :)
All the other functions work flawlessly !

I found this adb command but it's not working at all unfortunately
adb shell settings put secure sysui_rounded_size 1
adb shell settings put secure sysui_rounded_content_padding 5
(no change with different values or reboots)

Untitled.png
 
Last edited:
  • Like
Reactions: rajeshkoshti

ZFGFade

Member
Oct 4, 2018
48
5
v7.14.18 in-ap update:
-Fixed bugs on OneUi4.0: brightness threshold for adaptive mod bug, netspeed indicator bug
-Fixed bug on minimum hz tile and minimum hz tile tasker command
-Improved Russian translations
-Minor stability fixes


v7.14.17 in-app update now available
-Auto sensors off workaround for OneUI4.0
-Fixed bug: setting min hz for adaptive (%lhz) usingTasker not working
-Fixed bug: unable to turn off accessibility when no feature requiring such is enabled
-experimental workaround for enabling Adaptive/High refresh rate on PSM on OneUI4.0
- other stability fixes
The 7.14.19 update broke how quickly the app detects movement on s20 fe 5g one ui 3.1 in adaptive mode. 7.14.18 works perfectly but anything beyond 7.14.19 activates 120hz half a second late when in adaptive mode. I'm gonna continue using 7.14.18 for now but please try to fix :) and I'll try moving to one ui 4 whenever it gets released here
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    I think that I found a way to use psm + 120hz. Be sure to have the max hz psm toggle on and one ui (4) psm on as well, then open and close Google maps.
    5
    About this app:
    • Refresh Rate Control: Easily control the max refresh rate (Hz) of android devices with multiple refresh rates (e.g. note20 ultra, s20/S20+/S20Ultra, z fold 2, s21/s21+/s21Ultra, tab S7/S7+, z fold 3, z flip 3). This app can limit max refresh rate to 96hz (or any available refresh rate) on supported smartphones - you can save power with negligible difference on smoothness. Use either the in-app toggle or quick settings tile - ADB setup or Root NOT needed.

    • Force High: Option to use Higha(Fixed) motion smoothness mode on Samsung devices with native Adaptive motion smoothness***

      Current Samsung smartphones natively supporting adaptive refresh rates:
      • Galaxy Note 20 Ultra
      • Galaxy Z Fold 2
      • Galaxy S21, S21+, S21 Ultra
      • Galaxy Z Flip 3
      • Galaxy Z Fold 3

    • Refresh Rate Monitor: Show real-time screen refresh rate as statusbar icon and/or as overlay. Overlay size and location is adjustable. Use either the in-app toggle or quick settings tile

    • Quick Resolution Switcher: Easily switch to any supported resolutions using the included quick setting tile***

    • Quick High/Adaptive on Power Saving Mode: Easily switch to high or adaptive motion smoothness mode (from Standard) even on power saving mode on supported Samsung smartphones.***
      Note: May not working (blocked by samsung) on some devices with OneUI4.*.
      Update: Google maps workaround implemented in v7.14.51


    • Force to Lowest Hz: Force lowest refresh rate on screen-off/AOD. This overrides Samsung's strange stock behavior which sets the refresh rate to the highest on screen off (update: it is now at 60hz since oneui3.0) - to improve standby power consumption a bit - ADB setup or Root NOT needed.

    • Auto apply power saving mode during screen-off (after ~ 10 secs)***

    • Tasker plugin support: Automate GMH settings with Tasker app. Supported actions/variables: max refresh rate, min refresh rate, keep smooth motion on PSM, motion smoothness mode, quick-doze mod, change dispaly resolution, auto sensors off. More info in FAQs below

      Premium Features:

    • Keep High/Adaptive motion smoothness when power saving mode is enabled whether manually or by the system/adaptive power saving***
      Note: May not working (blocked by samsung) on some devices with OneUI4.*.
      Update: Google maps workaround implemented in v7.14.51


    • Adaptive refresh rate mod for devices supporting multiple refresh rates but do not have the stock Adaptive motion smoothness (e.g. S20 series, S20FE, TabS7/S7+,S21FE) with the ability to set the brightness threshold for its activation***
    • Quick-doze mod: Quickly enter doze mode during screen-off that can not be interrupted by motion ***

    • Set minimum refresh rate for adaptive mode to 60hz or lower (if supported)***

    • Resolution switcher filter: Filter what screen resolutions to include for the resolution switcher QS tile.

    • Auto SENSORS OFF (experimental non-root workaround):
      Device sensors will automatically turn off while screen is off until the device is unlocked. This helps minimize battery-draining motion-triggered wakelocks while device is not being used.

    • Statusbar net speed indicator

    • 7-day Premium Trial is available. Just click "Activate Premium|Trial" button and activate free trial when prompted.

      Note: The premium license is on a per device basis.
    ***these marked features require a one-time ADB setup (this is not root)

    Info: This app targets older android sdk in order to control refresh rates without ADB setup. Just ignore the dialog that says "This app was built for an older version of Android...." when opened for the first time.


    Download

    Please read FAQs, changelogs and more information here (specially before asking questions or reporting bugs).

    3
    v6.60 is now up! :) - you can check this update in the app.
    Includes a working adaptive refresh rate mod for S20 series, S20FE and other Samsung devices with multiple refresh rates.
    I hope you'll understand if it's only for ad-free for now.
    You can test it using the 7-day ad-free trial! :)


    v6.60
    • Experimental Adaptive refresh rate mod working for Samsung devices supporting multiple refresh rates (e.g. S20/S20+/S20Ultra,S20FE) (only available for Ad-free)
    • Quick power-doze mod: Automatic power saving mode and quick doze mode on screen-off (only available for Ad-free)
    • 7-day ad-free trial is available for you to test. Just click "Activate Ad-free" button and click "More info" on the snackbar prompt that will appear.
    2
    7.00.30 in-app update now up! :)

    - Bug fixes
    v7.00.changes
    - `Keep motion smoothness on power saving mode` will now take effect immediately after toggle
    - Filter what resolutions to include in the screen resolution switcher
    - Power saving mode and deep-doze are now separate options under screen-off mods
    - Adaptive or high motion smoothness on CQHD+ resolution now sticks after reboot.
    -Adjustments on doze mode to prevent it from being interrupted by significant motion. This should improve doze performance when the device is constantly in pocket or in motion.
    - Additional doze option with no maintenance window added

    *Note For S20 FE, to add HD+ resolution, just clear app data and open app while connected to internet.
    2
    Yes, I am using v6.63.10 One UI 3.1 S20FE 5G.
    Just tested again on both YouTube and Netflix (full screen video), same behaviour on both...when a notication is received the refresh rate goes high and stays high even after the notication is cleared or auto clears itself. Also, it seems that the refresh rate only changes or goes low again after pressing the home button otherwise it stays at the highest frequency.
    Note: I have enabled "Show refresh rate" in developer option to see this behaviour and I've cleared app data after installing this update.
    EDIT: this issue does not happen in v6.62.25 - grabbed this version from XDA
    Just downloaded v6.63.10 from the main xda thread (downloaded v6.62.25 yesterday) and tested again...now the refresh rate is changing as expected 😀 not sure why the issue occurred with the update even after wiping app data?
    Thanks again