[App]Galaxy Max Hz (Refresh Rate Mods, Screen-off Mods and More)

Search This thread
By:
Advanced…
tribalfs

tribalfs

Senior Member
Mar 28, 2014
2,716
1,983
Samsung Galaxy Z Fold 5
v7.12.20 in-app update is now available. :)
- Fixed intermittent bugs:
- Power saving mode on screen-off: PSM not turning off back on screen on.
- Turn-off autosync on screen off: autosync not turning on back on screen on

onken said:
Hello, i have S20 FE 5G (SD) and see only 60 or 120 Hz, not have 96 Hz ??
Possible to future ?? 120Hz its not good :(
Click to expand...
Click to collapse
96Hz is not supported/enabled in S20 FE 5G.
 
  • Like
Reactions: KiranGadge911
tribalfs

tribalfs

Senior Member
Mar 28, 2014
2,716
1,983
Samsung Galaxy Z Fold 5
v7.13.00 in-app update now up.

tribalfs said:
v7.13
Anti-flicker: added minimum brightness threshold for Adaptive mod similar to the native one. When the device's display brightness falls below the set minimum brightness threshold, adaptive mod will pause and will resume once the brightness increases again above the threshold. This is for devices who are experiencing flickers when refresh rate switches at certain low brightness level.
Stability and bug fixes
Click to expand...
Click to collapse
 
  • Like
Reactions: android_htc
tribalfs

tribalfs

Senior Member
Mar 28, 2014
2,716
1,983
Samsung Galaxy Z Fold 5
v7.14.12 in-app update now available.
-fixed force close when app is installed first time


v7.14.10 in-app update now available :)

-48hz on force lowest on screen off/AOD now works on S20/+/Ultra on any refresh rate mode
-improvements on brightness threshold for adaptive mod performance(anti-flicker)
-added quick settings tille to toggle min hz for adaptive mod on supported devices
-added tasker option to toggle min hz for adaptive mod on supported devices
-other fixes
 
Last edited:
  • Like
Reactions: xcxa23 and KiranGadge911
tribalfs

tribalfs

Senior Member
Mar 28, 2014
2,716
1,983
Samsung Galaxy Z Fold 5
v7.14.13 in-app update now available.

-Added option to prevent system from switching back to high mode when adaptive mod is applied (for S20 series and FE). E.g. when using bixby routine to switch motion smoothness mode
-Bug fixes
 
  • Like
Reactions: KiranGadge911
D

Delvekk

Member
Feb 26, 2014
12
1
tribalfs said:
v7.14.13 in-app update now available.

-Added option to prevent system from switching back to high mode when adaptive mod is applied (for S20 series and FE). E.g. when using bixby routine to switch motion smoothness mode
-Bug fixes
Click to expand...
Click to collapse
Hi, I noticed that the issue with not properly working XBOX controller when Galaxy Max Hz service is enabled came back. Not sure from which version, but it's not possible to use it.
Could you please take a look on that?
 
ArtOne26

ArtOne26

New member
Jan 13, 2022
3
1
tribalfs said:
v7.14.13 in-app update now available.

-Added option to prevent system from switching back to high mode when adaptive mod is applied (for S20 series and FE). E.g. when using bixby routine to switch motion smoothness mode
-Bug fixes
Click to expand...
Click to collapse
Friend tell me if there will be a program update that will enable 120 hertz in energy saving mode for s20 fe on oneui 4?
 
tribalfs

tribalfs

Senior Member
Mar 28, 2014
2,716
1,983
Samsung Galaxy Z Fold 5
v7.14.18 in-ap update:
-Fixed bugs on OneUi4.0: brightness threshold for adaptive mod bug, netspeed indicator bug
-Fixed bug on minimum hz tile and minimum hz tile tasker command
-Improved Russian translations
-Minor stability fixes


v7.14.17 in-app update now available
-Auto sensors off workaround for OneUI4.0
-Fixed bug: setting min hz for adaptive (%lhz) usingTasker not working
-Fixed bug: unable to turn off accessibility when no feature requiring such is enabled
-experimental workaround for enabling Adaptive/High refresh rate on PSM on OneUI4.0
- other stability fixes
 
Fatalise

Fatalise

Member
Jan 14, 2022
18
7
Amazing app ! I'll definitely buy after I see how it behaves with one UI4
Only thing i noticed is that screen corners are more curved (check the pic), thus hiding a bit of display when in HD+ res on S20FE exynos (I could live with that btw :)
All the other functions work flawlessly !

I found this adb command but it's not working at all unfortunately
adb shell settings put secure sysui_rounded_size 1
adb shell settings put secure sysui_rounded_content_padding 5
(no change with different values or reboots)

Untitled.png
 
Last edited:
  • Like
Reactions: rajeshkoshti
Z

ZFGFade

Senior Member
Oct 4, 2018
59
9
Samsung Galaxy A Series 2017 A3, A5, A7
Samsung Galaxy S20 FE
tribalfs said:
v7.14.18 in-ap update:
-Fixed bugs on OneUi4.0: brightness threshold for adaptive mod bug, netspeed indicator bug
-Fixed bug on minimum hz tile and minimum hz tile tasker command
-Improved Russian translations
-Minor stability fixes


v7.14.17 in-app update now available
-Auto sensors off workaround for OneUI4.0
-Fixed bug: setting min hz for adaptive (%lhz) usingTasker not working
-Fixed bug: unable to turn off accessibility when no feature requiring such is enabled
-experimental workaround for enabling Adaptive/High refresh rate on PSM on OneUI4.0
- other stability fixes
Click to expand...
Click to collapse
The 7.14.19 update broke how quickly the app detects movement on s20 fe 5g one ui 3.1 in adaptive mode. 7.14.18 works perfectly but anything beyond 7.14.19 activates 120hz half a second late when in adaptive mode. I'm gonna continue using 7.14.18 for now but please try to fix :) and I'll try moving to one ui 4 whenever it gets released here
 
Last edited:
You must log in or register to reply here.

Similar threads

M
Samsung Galaxy s20 fe exynos gcam
Replies
6
Views
23K
T
Tomar777
L
Can the Samsung S20 FE reproduce local FM radio without network connection?
Replies
16
Views
29K
C
c0mm4nd
A
WAVELET New sound mod for unrooted devices
Replies
4
Views
7K
3mel
3mel
mambraxneol
Dual camera mode
Replies
6
Views
11K
apaxtc
apaxtc
C
Director mod
Replies
4
Views
5K
A
android_htc

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 11
    tribalfs
    tribalfs
    screenshot_20220819-154719_galaxy-maxhz-jpg.5689911
    screenshot_20220819-154703_galaxy-maxhz-jpg.5689913
    screenshot_20220819-154652_galaxy-maxhz-jpg.5689915



    About this app:

    Refresh Rate Mods
    • Change default refresh rates
      -Easily change the overall refresh rate settings of devices supporting multiple refresh rates.
      -Set supported mid refresh rates as the maximum refresh rate limit for battery savings (e.g. 96hz instead of 120Hz).
      -Quick settings shortcut
      -tasker plugin support.

    • Motion smoothness mode switcher(Normal, Adaptive or High)***
      -Apply adaptive mod on device that don't natively support adaptive mode [premium]
      -Tasker plugin support.


    • Per-app refresh rate settings:
      Set different refresh rate settings for every app either adaptive or fixed(stationary) [premium].


    • Motion smoothness on power saving mode (not working to all devices with OneUI4.**+, test first). ***
      -GMH will apply a workaround to bypass 60Hz limitation on Power Saving Mode (PSM) on supported Samsung smartphones.
      -Automatically apply workaround when PSM is enabled [premium]

      Note: Stopped working (blocked by system) on S20 series updated to OneUI4.*.
      Update: Google maps workaround implemented in v7.14.51
      Update: OneUi5.0 completely fixed the bug on Google maps that allows the app bypass 60Hz limit. Check app for possible extra steps that are reportedly remains working


    Screen-off Mods:
    • Force to Lowest Hz: Force the lowest refresh rate on screen-off or Always-On Display(AOD). This overrides Samsung's strange stock behavior which sets the refresh rate to the highest on screen off (update: it is now at 60hz since OneUI3.0) to improve standby power consumption a bit.
      -Tasker plugin support

    • Auto apply power saving mode during screen-off (after ~ 10 secs)***


    • Auto disable Autosync***

    • Quick-doze mod
      -      Quickly enter doze mode during screen-off that can not be interrupted by motion [premium].***
      -Tasker plugin support


    • Auto SENSORS OFF (experimental non-root workaround)
      -Device sensors will automatically turn off while screen is off until the device is unlocked to help minimize battery-draining motion-triggered wakelocks while device is not being used.
      -Tasker plug-in support
    Others
    • Battery protection mod (Experimental)
      -Option to set maximum charge to 86%-95%(for OneUI4+)[premium]

    • Quick resolution switcher
      -Easily switch to any supported resolutions using the included quick setting tile***
      -Tasker plugin support

    • Customizable refresh rate monitor
      -      Use statusbar or overlay which you can place anywhere on screen.
      -Tasker plugin support.

    • Net speed statusbar indicator
    OneUI inspired UI. Dynamic theme and Icon. Manual language selection

    Note: The premium license is on a per device basis (not per user).

    ***these marked features require a one-time ADB procedure (this is not root)

    Galaxy Max Hz background service is highly optimized. Background battery usage p is very negligible .

    Info: This app targets older android sdk in order to control refresh rates without ADB setup or root. Just tap OK the dialog that says "This app was built for an older version of Android...." when opened for the first time. If OK button is not visible, just tap the blank space on the lowest portion of the dialog.


    Download
    v8.0.0

    Changelogs
    Github wiki


    View
    6
    A
    arrozcps
    I think that I found a way to use psm + 120hz. Be sure to have the max hz psm toggle on and one ui (4) psm on as well, then open and close Google maps.
    View
    3
    tribalfs
    tribalfs
    v6.60 is now up! :) - you can check this update in the app.
    Includes a working adaptive refresh rate mod for S20 series, S20FE and other Samsung devices with multiple refresh rates.
    I hope you'll understand if it's only for ad-free for now.
    You can test it using the 7-day ad-free trial! :)


    tribalfs said:
    v6.60
    • Experimental Adaptive refresh rate mod working for Samsung devices supporting multiple refresh rates (e.g. S20/S20+/S20Ultra,S20FE) (only available for Ad-free)
    • Quick power-doze mod: Automatic power saving mode and quick doze mode on screen-off (only available for Ad-free)
    • 7-day ad-free trial is available for you to test. Just click "Activate Ad-free" button and click "More info" on the snackbar prompt that will appear.
    Click to expand...
    Click to collapse
    View
    2
    tribalfs
    tribalfs
    7.00.30 in-app update now up! :)

    - Bug fixes
    v7.00.changes
    - `Keep motion smoothness on power saving mode` will now take effect immediately after toggle
    - Filter what resolutions to include in the screen resolution switcher
    - Power saving mode and deep-doze are now separate options under screen-off mods
    - Adaptive or high motion smoothness on CQHD+ resolution now sticks after reboot.
    -Adjustments on doze mode to prevent it from being interrupted by significant motion. This should improve doze performance when the device is constantly in pocket or in motion.
    - Additional doze option with no maintenance window added

    *Note For S20 FE, to add HD+ resolution, just clear app data and open app while connected to internet.
    View
    2
    A
    android_htc
    android_htc said:
    Yes, I am using v6.63.10 One UI 3.1 S20FE 5G.
    Just tested again on both YouTube and Netflix (full screen video), same behaviour on both...when a notication is received the refresh rate goes high and stays high even after the notication is cleared or auto clears itself. Also, it seems that the refresh rate only changes or goes low again after pressing the home button otherwise it stays at the highest frequency.
    Note: I have enabled "Show refresh rate" in developer option to see this behaviour and I've cleared app data after installing this update.
    EDIT: this issue does not happen in v6.62.25 - grabbed this version from XDA
    Click to expand...
    Click to collapse
    Just downloaded v6.63.10 from the main xda thread (downloaded v6.62.25 yesterday) and tested again...now the refresh rate is changing as expected 😀 not sure why the issue occurred with the update even after wiping app data?
    Thanks again
    View

New posts