Themes / Apps / Mods [App]Galaxy Max Hz (Refresh Rate Mods, Screen-off Mods and More)

Search This thread
Aug 19, 2010
11
3
Samsung Galaxy Watch 4
Maybe the Fold 3 outer screen only supports 60 and 120, while the inner one adds 48 and 96?

On the outer screen, it only reports 96 on the status indicator when locked in high, but feels like 60.

On the inner screen, adaptive hits 96 and feels smooth in adaptive.
 
Last edited:

iTryH

Senior Member
Nov 15, 2020
70
4
I bought this app and had to format my phone now it acts like I haven't purchased it.
 

Nastrahl

Senior Member
Maybe the Fold 3 outer screen only supports 60 and 120, while the inner one adds 48 and 96?

On the outer screen, it only reports 96 on the status indicator when locked in high, but feels like 60.

On the inner screen, adaptive hits 96 and feels smooth in adaptive.
I've set up to adaptive with 120Hz as max and 48 as low and it works flawlessly on my side.
 
Aug 19, 2010
11
3
Samsung Galaxy Watch 4
Ugh... Maybe different models have different front panels or something?

When I have adaptive+120 enabled, on my outer screen, I can watch the statusbar indicator and see it jump to 120 for scrolling then back to 60 afterwards.

With adaptive+96 enabled, on my outer screen, it stays at 60 when I scroll.

On the inside panel, adaptive+96 shows 96 when I scroll, and then comes back down to 60.

It's very strange.
 
Aug 19, 2010
11
3
Samsung Galaxy Watch 4
Great app!

Any chance of logging or graphing? Or does it at least output to ADB? (I haven't checked)

What are the chances of getting adaptive to do 48 instead of 60 for the slow refresh rate? That'd be wild to try out.
 

MrHomebrew

Senior Member
I am also seeing the outer display go from 96hz down to 60hz and does not adapt back to the 96hz. Moving the slider to 120hz and back to 96hz does again show 96hz but locks back to 60hz and does not adaptively go back to 96hz well touching the screen. All these issues are happening on the outer screen, inner display works as it should.
 
Last edited:
  • Like
Reactions: bryanhayn

MrHomebrew

Senior Member
Also noticing the min hz for adaptive slider is also stuck at 60hz and you are unable to set it to 48hz. Maybe this has something to do with the outer display locking to 60hz as a posed to 96hz when set in the app.

I got the toggle working again by disabling motion smoothness and then re-enable adaptive in stocks settings. Still the 60hz locking on front screen.
 
Last edited:

Kentronix57

New member
Nov 13, 2021
1
0
Amazing app! It has been working like a charm on the Fold2 and Fold3!

Will there be an update for Android 12 OneUI 4.0 support? It seems that now I have updated to the beta, sometimes the app works like a charm but most of the time, my phone is stuck in 60hz, both inner and outer screens, (I run battery saving mode 24/7) no matter the settings I change.

Thanks for the great app!
 

chanhmn

New member
May 1, 2021
3
0
Hi guys, thanks for the amazing app, I already purchased the app and updated to the latest version, but the PSM still won't work with 120hz and my fold 3 already updated to one ui 4 android 12, hopefully u can help me fix it
 

tribalfs

Senior Member
Mar 28, 2014
1,739
1,312
v7.14.17 in-app update now available
-Auto sensors off workaround for OneUI4.0
-Fixed bug: setting min hz for adaptive (%lhz) usingTasker not working
-Fixed bug: unable to turn off accessibility when no feature requiring such is enabled
-experimental workaround for enabling Adaptive/High refresh rate on PSM on OneUI4.0
- other stability fixes
 

chanhmn

New member
May 1, 2021
3
0
v7.14.17 in-app update now available
-Auto sensors off workaround for OneUI4.0
-Fixed bug: setting min hz for adaptive (%lhz) usingTasker not working
-Fixed bug: unable to turn off accessibility when no feature requiring such is enabled
-experimental workaround for enabling Adaptive/High refresh rate on PSM on OneUI4.0
- other stability fixes
Thanks for the update, but I think my fold 3 still won't do 120hz on PSM mode, do I have to do anything to make it work?
 

whatwhatster

Senior Member
Oct 1, 2013
68
21
Noticed yesterday that my Z Fold 3 sticks to 60hz when folded when I have the hz on 96.
When putting it back to 120hz it works with the variable hz again.

I am on the last update.
 

whatwhatster

Senior Member
Oct 1, 2013
68
21
I have an issue with Edge Browser alone.

When setting adaptive to 96hz and minimum on 48hz, Edge Browser is dropping to 48hz only.
When setting it back to 120hz it works properly....

Like I said only Edge Browser this, stable, beta etc

This is only when browsing, when I go to the settings it works properly.
All other browser's are also just fine.
 

snaske65

Member
Jul 22, 2017
37
4
Quick question,fold 3 when I first installed this app I could get 48 hz when not touching the inside screen but now the lowest I can get is 60 hz. I can get 48 when asleep. Any reason for this?
 

tribalfs

Senior Member
Mar 28, 2014
1,739
1,312
Noticed yesterday that my Z Fold 3 sticks to 60hz when folded when I have the hz on 96.
When putting it back to 120hz it works with the variable hz again.

I am on the last update.
Pls check first post.

I have an issue with Edge Browser alone.

When setting adaptive to 96hz and minimum on 48hz, Edge Browser is dropping to 48hz only.
When setting it back to 120hz it works properly....

Like I said only Edge Browser this, stable, beta etc

This is only when browsing, when I go to the settings it works properly.
All other browser's are also just fine.
It seems edge browser not properly handling adaptive 96hz - this can be fixed only on edge end.
 
  • Like
Reactions: whatwhatster

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Galaxy Fold 3 works with the 120hz update if you connect to the TV in power saving mode (smart view), then disconnect and the screen update (120hz) is retained.
  • 11
    About this app:
    • Refresh Rate Control: Easily control the max refresh rate (Hz) of android devices with multiple refresh rates (e.g. note20 ultra, s20/S20+/S20Ultra, z fold 2, s21/s21+/s21Ultra, tab S7/S7+, z fold 3, z flip 3). This app can limit max refresh rate to 96hz (or any available refresh rate) on supported smartphones - you can save power with negligible difference on smoothness. Use either the in-app toggle or quick settings tile - ADB setup or Root NOT needed.
      Bug: Some users reported that 96hz on adaptive does not work on outer screen on Z Fold 3.

    • Force High: Option to force (fixed) a refresh rate mode (High Mode) on Samsung devices with native Adaptive motion smoothness***

      Current Samsung smartphones natively supporting adaptive refresh rates:
      • Galaxy Note 20 Ultra
      • Galaxy Z Fold 2 (inner screen)
      • Galaxy Z Fold 3
      • Galaxy S21, S21+, S21 Ultra
      • Galaxy Z Flip 3

    • Refresh Rate Monitor: Observe how multiple refresh rates work on your device. Use either the in-app toggle or quick settings tile

    • Quick Resolution Switcher: Easily switch to any supported resolutions using the included quick setting tile***

    • Quick High/Adaptive on Power Saving Mode: Easily switch to high or adaptive motion smoothness mode (from Standard) even on power saving mode on supported Samsung smartphones.***
      Note: Not working (blocked by samsung) on some devices with OneUI4.0

    • Force to Lowest Hz: Force lowest refresh rate on screen-off/AOD. This overrides Samsung's strange stock behavior which sets the refresh rate to the highest on screen off (update: it is now at 60hz since oneui3.0) - to improve standby power consumption a bit - ADB setup or Root NOT needed.

    • Auto apply power saving mode during screen-off (after ~ 10 secs)***

    • Tasker plugin support: Automate GMH settings using the app's Tasker plugin support. Supported actions/variables: Max Refresh Rate, Keep Motion Smoothness on PSM, Motion Smoothness Mode, Quick-doze Mod, Change Screen Resolution. (new in v7.10). More info in FAQs below.

      Premium Features:

    • Keep High/Adaptive motion smoothness when power saving mode is enabled whether manually or by the system/adaptive power saving***
      Note: Not working (blocked by samsung) on some devices with OneUI4.0

    • Adaptive refresh rate mod for devices supporting multiple refresh rates but do not have the stock Adaptive motion smoothness (e.g. S20 series, S20FE, TabS7/S7+) with the ability to set the brightness threshold for its activation***

    • Quick-doze mod: Quickly enter doze mode during screen-off that can not be interrupted by motion ***

    • Set minimum refresh rate for adaptive mode to 60hz or lower (if available)***

    • Resolution switcher filter: Filter what screen resolutions to include for the resolution switcher QS tile.

    • Auto SENSORS OFF (experimental non-root workaround):
      Device sensors will automatically turn off while screen is off until the device is unlocked. This helps minimize battery-draining motion-triggered wakelocks while device is not in use.

    • 7-day Premium Trial is available. Just click "Activate Premium|Trial" button and activate free trial when prompted.

      Note: Ad-free license is on a per device basis.
    ***these marked features require a one-time ADB setup (this is not root)

    Download

    Please read FAQs and more info in here
    2
    v7.14.17 in-app update now available
    -Auto sensors off workaround for OneUI4.0
    -Fixed bug: setting min hz for adaptive (%lhz) usingTasker not working
    -Fixed bug: unable to turn off accessibility when no feature requiring such is enabled
    -experimental workaround for enabling Adaptive/High refresh rate on PSM on OneUI4.0
    - other stability fixes
    2
    Whoa really? I didn't see it as an option. How do I set that in the app? I'll totally go buy the app right now once I know how to do it :D
    Sorry, I mean possible to add it in the next update.
    1
    v7.14.10 in-app update now available :)

    -48hz on force lowest on screen off/AOD now works on S20/+/Ultra on any refresh rate mode
    -improvements on brightness threshold for adaptive mod performance(anti-flicker)
    -added quick settings tille to toggle min hz for adaptive mod on supported devices
    -added tasker option to toggle min hz for adaptive mod on supported devices
    -other fixes
    1
    Galaxy Fold 3 works with the 120hz update if you connect to the TV in power saving mode (smart view), then disconnect and the screen update (120hz) is retained.