[App]Galaxy Max Hz (Refresh Rate Mods, Screen-off Mods, QS Tiles, Tasker Support and More)

[ian_dapia]

I have this bug on S21 fe that when the battery mod is toggled. It doesn't have any problem stopping the charging of the device when reached the threshold set but the problem is that when I use the device until let say 30% and I want to charge the phone again, when I plug it to its charger, it actually wont let the device charge like it is stuck on 30%. My workaround for this is to power off the device while charging. I also tried toggling the battery mod off & force stopped the app but no luck. Hope you can fix this issue soon.

Thanks!

 

[tribalfs]

I have this bug on S21 fe that when the battery mod is toggled. It doesn't have any problem stopping the charging of the device when reached the threshold set but the problem is that when I use the device until let say 30% and I want to charge the phone again, when I plug it to its charger, it actually wont let the device charge like it is stuck on 30%. My workaround for this is to power off the device while charging. I also tried toggling the battery mod off & force stopped the app but no luck. Hope you can fix this issue soon.

Thanks!

This is not an issue of battery mod. The built-in charge limiter (that is used by the app) can only stop battery charge at 80% or higher but not lower.

 

[bodko9]

Works on Galaxy S21 , Anrdoid 13, One UI 5.
Installed and run through adb, firstly PSM+ adaptive 120 Hz did not work together - but used Dex hack:
connected phone to external monitor (4k 60hz) via usb c for a 1 minute and disconnected it - instantly 120hz appeared in left top corner (turned on in dev options).
Unfortunately workaround works per 1 boot cycle - after reboot / turn off + on need to connect to dex one more time.
Anyway it's better than 60hz + psm or 120hz only - so bought full version, hope some time later the fix will be permanent.
thanks @tribalfs !

 

[chytrypch]

I am experiencing weird problem. So everything was working but after few updates it not going down with Hz. Refreshing is on high and can't switch to prevent that (it's blurry)
After reinstall when I want to type activation code it says " server is busy please try later" but after few clicks again it says premium without code. After that i still can't prevent from high and adaptive not working. Please help.


Edit. In misctic way i somehow fixed it.

 

[ubelai]

Hey @tribalfs ,

Not sure if it has been mentioned yet, as I can’t find it searching the threads either.

Any chance you could add an option to change resolution, as well as adaptive or static rates, in the per-app settings?

I think this would be an awesome feature, for e.g. opening YouTube would auto enable Adaptive 60Hz and cQHD+, then auto changing depending settings for home screen or opening a different app.

I know there is a quick settings tile which is highly convenient already, but multi tasking without having to do it manually would be a game changer.

Thank you for your top work!!

 

[Enfiye]

I have already bought donation for gmh on gmh donation app and I had used premium with no issue. But I reset it to factory reset and now, gmh donation wants that buy the donation again. What should I do?

Edit: I got it.

 

[syber shaman]

Can confirm that the mock video call method to activate high refresh rate during PSM works on One UI 5. What's weird is that I wasn't able to make it work in One UI 4.x lol. Anyway this is good. Now I can reactivate it even when I'm not at home.

 

[Adramel]

How to recover the code after paying with PayPal from the application level? I had to factory reset my phone and now I don't have access to the full version of the app
EDIT:
Sorry, found the email
Problem solved

 

[vudn54]

after paying with Paypal and have active code, I cannot enter active code because remote server is busy.

 

[igvorz]

Hey!
I am planning to purchase premium version just for one specific thing. Making screen frame rate in "Adaptive mode". So there are two questions:
1) Is it compatible with latest Samsung S21 FE(Snap version) firmware(A13 OneUi 5.0)?
2) Will it affect Knox and warranty void?

Thank you

 

[ian_dapia]

This is not an issue of battery mod. The built-in charge limiter (that is used by the app) can only stop battery charge at 80% or higher but not lower.

For some reason the fast charging is now working fine again after I updated the app to 8.0.0.14. That was weird

 

[tribalfs]

after paying with Paypal and have active code, I cannot enter active code because remote server is busy.

Hi! Are you able to activate already?

 

[tribalfs]

Hey!
I am planning to purchase premium version just for one specific thing. Making screen frame rate in "Adaptive mode". So there are two questions:
1) Is it compatible with latest Samsung S21 FE(Snap version) firmware(A13 OneUi 5.0)?
2) Will it affect Knox and warranty void?

Thank you

replied S21FE thread

 

[tribalfs]

For some reason the fast charging is now working fine again after I updated the app to 8.0.0.14. That was weird

Yes, that was weird.

 

[tribalfs]

v8.1.0 update
-New setting: refresh rate for low battery state.

 

[rmrbpt]

Hi guys.
Can anyone tell me what are the default settings for a S21?
I want to uninstall the app and keep the factory settings...

 

[Childe89]

Hello, few days after installing this app suspicious activity began on my phone - Google Ads and Facebook Ads started appearing without me authorizing or paying for them....

I'm not implying this app is the cause - I'm afraid I might have downloaded the Trojan infected version mentioned in first post - do you have more info on this, how this Trojan work?
My phone is not rooted, I just used the ADB command - is my phone infected now? Does the ADB command allow for such activity in theory, if the app was infected? I deleted app, it's enough in such case? Should I factory reset my phone?

Again - I'm not implying it's apps fault - maybe it's just accident that it started after installing, my accounts were maybe hacked in the meantime, just checking for any option, since it was last thing I did on my phone before my accounts started to be compromised. But again - maybe my accounts were hacked directly, I really don't know at this time.

Thank for any experiences or opinions!

 

[tribalfs]

Hello, few days after installing this app suspicious activity began on my phone - Google Ads and Facebook Ads started appearing without me authorizing or paying for them....

I'm not implying this app is the cause - I'm afraid I might have downloaded the Trojan infected version mentioned in first post - do you have more info on this, how this Trojan work?
My phone is not rooted, I just used the ADB command - is my phone infected now? Does the ADB command allow for such activity in theory, if the app was infected? I deleted app, it's enough in such case? Should I factory reset my phone?

Again - I'm not implying it's apps fault - maybe it's just accident that it started after installing, my accounts were maybe hacked in the meantime, just checking for any option, since it was last thing I did on my phone before my accounts started to be compromised. But again - maybe my accounts were hacked directly, I really don't know at this time.

Thank for any experiences or opinions!

If you downloaded it from link in the official XDA thread or in GMH official github, then probably it's not the app.

Btw, where are the ads appearing? Might be your internet browser.

 

[Childe89]

I was probably unclear, sorry I'm not native speaker - the ad campaigns were created in my own accounts by "me" but of course I wasn't creating them nor aware of it, someone took control of my account, I just noticed charges on credit card and blocked account.
It was exactly this type of attack:

Why hackers are using ISIS flags to disable people's Facebook accounts

Using a series of bizarre techniques, hackers managed to gain control of all Melbourne pilot Jake Barden's ...

www.google.com

First my personal account was blocked by disturbing images and then I was blocked out business page and ads were purchased there.

Then ads started from my Google Ads account as well.

So both my Facebook profile/page and Google Ads were hacked. And I'm looking for source now, I don't know how they managed it since I have 2 factor login authorization and everything...

 

[fatspirit]

Haven't found this in FAQ. I've set an adaptive profile with default 24 Hz min freq. Streaming app I use still falls down to unacceptable 10 Hz on some old bw movies. Does it mean that S22 ignores exact value or min Hz array could be either 24 or 10 and one should set min value a little higher (how much?) not to fall into the lowest Hz range?