Themes / Apps / Mods [App]Galaxy Max Hz (Refresh Rate Mods, Screen-off Mods, QS Tiles, Tasker Support and More)

Search This thread

[email protected]

Senior Member
Jan 15, 2009
2,482
566
Stockholm
@tribalfs

would it be possible to set minimum Hz for when typing on the keyboard? I'm using 10Hz as minimun for overall settings and when typing in for example Whatsapp it goes down to 10Hz and stays there, but the typing becomes slow so if it would be possible to change Hz just for when typing would be nice, thanks! :)
 

tribalfs

Senior Member
Mar 28, 2014
1,929
1,458
@tribalfs

would it be possible to set minimum Hz for when typing on the keyboard? I'm using 10Hz as minimun for overall settings and when typing in for example Whatsapp it goes down to 10Hz and stays there, but the typing becomes slow so if it would be possible to change Hz just for when typing would be nice, thanks! :)
That's strange. It should not stay in 10Hz.
GMH limit on typing (if enabled in GMH settings) is at 48hz/60hz
Can you check and provide info on the ff:
- Are you on the latest version? If so, pls update.
- Did you performed the ADB procedure? I highly recommend to do so if not yet.

Thank you.
 

[email protected]

Senior Member
Jan 15, 2009
2,482
566
Stockholm
That's strange. It should not stay in 10Hz.
GMH limit on typing (if enabled in GMH settings) is at 48hz/60hz
Can you check and provide info on the ff:
- Are you on the latest version? If so, pls update.
- Did you performed the ADB procedure? I highly recommend to do so if not yet.

Thank you.
ok, yes latest version, ADB procudure performed, I think 24Hz works good if it's possible to use that for when typing. I also noticed when using 24Hz as minimun the option for limit when typing disappears and it goes back to 60Hz when typing.
 

tribalfs

Senior Member
Mar 28, 2014
1,929
1,458
ok, yes latest version, ADB procudure performed, I think 24Hz works good if it's possible to use that for when typing. I also noticed when using 24Hz as minimun the option for limit when typing disappears and it goes back to 60Hz when typing.
24hz is still low for the animation of keys
If should be either 48/60hz even when 10Hz min hz is set.
If it stucked to 10Hz on your device, try clearing the app's data.
 

StewMaker

Senior Member
Jun 17, 2017
70
22
How's S22 base and plus capable for 10hz and 24hz when Samsung says they can only do 48-120hz?
 

Elm3alem

Senior Member
Jul 31, 2013
81
9
Hi there
I'd like to report a bug that i hope to fix
I'm enabling the option " power saving mode on screen off" and I make the device to Auto restart Daily before I wake up.
The bug is that, when the device automatically restart, it keeps on power saving till i turn it off Manually, I appreciate your tremendous effort, Appreciate if you try to fix this bug in the next update, please 🙏🏼
As I don't like the lag of the device in power saving mode while screen on, but Enjoy the power saving mode while screen off only .
 

Herist

Member
Oct 27, 2010
7
2
Samsung Galaxy S22
Have a little bug, when playing video on WA and Instagram story got lowest refresh rate 10hz, very laggy video.
Try using tasker to set minimum refresh rate but not work, the profile can't activate..
 

tribalfs

Senior Member
Mar 28, 2014
1,929
1,458
Hi there
I'd like to report a bug that i hope to fix
I'm enabling the option " power saving mode on screen off" and I make the device to Auto restart Daily before I wake up.
The bug is that, when the device automatically restart, it keeps on power saving till i turn it off Manually, I appreciate your tremendous effort, Appreciate if you try to fix this bug in the next update, please 🙏🏼
As I don't like the lag of the device in power saving mode while screen on, but Enjoy the power saving mode while screen off only .
It does automatically turn off power saving on restart. But not until device is unlocked. App can't execute code before device is unlocked after reboot even when the screen is turned on. Is this not the case?
 
Last edited:

tribalfs

Senior Member
Mar 28, 2014
1,929
1,458
Have a little bug, when playing video on WA and Instagram story got lowest refresh rate 10hz, very laggy video.
Try using tasker to set minimum refresh rate but not work, the profile can't activate..
Some clarifications. Does this occur only when min hz is set to 10Hz? Are these apps installed from official sources. Thank you.
 

Elm3alem

Senior Member
Jul 31, 2013
81
9
It does automatically turn off power saving on restart. But not until device is unlocked. App can't execute code before device is unlocked after reboot even when the screen is turned on. Is this not the case?

If that so, is that means that, when I unlock the Device after it was restarted, where i see the device still ON power saving, as soon as I turn off and back on the screen, the power saving will be Automatically turned off !
Is that what supposed to happen !?
I'll try that today and gave you feedback

By the way the app was found cracked at some telegram channels,, I hope you manage to pay more Attention securing this valuable Application 🤝🏻
 

Elm3alem

Senior Member
Jul 31, 2013
81
9
It does automatically turn off power saving on restart. But not until device is unlocked. App can't execute code before device is unlocked after reboot even when the screen is turned on. Is this not the case?
As Expected
It didn't close the power saving Even after unlocking the device and off then on the screen many times to be sure ..
It's a bug that needs Your attention.
 

tribalfs

Senior Member
Mar 28, 2014
1,929
1,458
If that so, is that means that, when I unlock the Device after it was restarted, where i see the device still ON power saving, as soon as I turn off and back on the screen, the power saving will be Automatically turned off !
Is that what supposed to happen !?
I'll try that today and gave you feedback

By the way the app was found cracked at some telegram channels,, I hope you manage to pay more Attention securing this valuable Application 🤝🏻
Thank you. I think they only got the old version released more than a year ago. They should be careful with that it's loaded with trojan.

As Expected
It didn't close the power saving Even after unlocking the device and off then on the screen many times to be sure ..
It's a bug that needs Your attention.
Let me look more on this. Thank you.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    About this app:
    • Refresh Rate Control: Easily control the max refresh rate (Hz) of android devices with multiple refresh rates . This app can adjust the max refresh rate and min refresh rate on supported smartphones. Use either the in-app toggle or quick settings tile - ADB setup or Root NOT needed.
      Note: It's reported that after a certain Samsung's update, 96Hz on Adaptive Mode doesn't anymore work on S22 while on normal power mode. But still working while on power saving mode on certain brightness level. Unfortunately, this is beyond control of GMH.


    • Force High: Option to use High(Fixed) motion smoothness mode on Samsung devices with native Adaptive motion smoothness***. Current Samsung smartphones that natively support adaptive refresh rates include Galaxy S22.

    • Refresh Rate Monitor: Show real-time screen refresh rate as statusbar icon and/or as overlay. Overlay size and location is adjustable. Use either the in-app toggle or quick settings tile

    • Quick Resolution Switcher: Easily switch to any supported resolutions using the included quick setting tile***

    • High/Adaptive on Power Saving Mode: The app will apply a workaround to bypass 60Hz limitation on Power Saving Mode on supported Samsung smartphones.***
      Note: It is reported that workaround is blocked in OneUi5.0 beta.


    • Force to Lowest Hz: Force lowest refresh rate on screen-off/AOD. This overrides Samsung's strange stock behavior which sets the refresh rate to the highest on screen off (update: it is now at 60hz since oneui3.0) - to improve standby power consumption a bit - ADB setup or Root NOT needed.

    • Auto apply power saving mode during screen-off (after ~ 10 secs)***

    • Tasker plugin support: Automate GMH settings with Tasker app. Supported actions/variables: max refresh rate, min refresh rate, keep smooth motion on PSM, motion smoothness mode, quick-doze mod, change dispaly resolution, auto sensors off. More info in FAQs below

      Premium Features:

    • Keep High/Adaptive motion smoothness when power saving mode is enabled The app will automatically apply a workaround to bypass 60Hz limitation on Power Saving Mode on supported Samsung smartphones.***
      Note: It is reported that workaround is blocked in OneUi5.0 beta.

    • Adaptive refresh rate mod for devices supporting multiple refresh rates but do not have the stock Adaptive motion smoothness (e.g. S20 series, S20FE, TabS7/S7+) with the ability to set the brightness threshold for its activation***

    • Quick-doze mod: Quickly enter doze mode during screen-off that can not be interrupted by motion ***

    • Override default minimum refresh rate for adaptive to lower value(if supported)***

    • Resolution switcher filter: Filter what screen resolutions to include for the resolution switcher QS tile.

    • Auto turn off Autosync: Turn off autosync settings while the screen is off.

    • Auto SENSORS OFF (experimental):
      Device sensors will automatically turn off while screen is off until the device is unlocked. This helps minimize battery-draining motion-triggered wakelocks while device is not being used.

    • 3-day Premium Trial is available. Just click "Activate Premium|Trial" button and activate free trial when prompted.
    Note: The premium license is on a per-device basis (not per-user).

    ***these marked features require a one-time ADB procedure (this is not root)

    Galaxy Max Hz background service is highly optimized. Background battery consumption of this app is very negligible .

    Info: This app targets older android sdk in order to control refresh rates without ADB setup. Just tap OK the dialog that says "This app was built for an older version of Android...." when opened for the first time. If OK button is not visible, just tap the blank space on the lowest portion of the dialog.


    Download
    Latest stable (v7.14.58)
    v8.0.0-alpha

    Please read FAQs, changelogs and more information here (specially before asking questions or reporting bugs).
    4
    v7.14.35 in-app update
    -Bug fixes
    2
    v7.14.33 in-app update now available.
    -Improved video player and PIP behavior on lowest min hz settings.
    -Fixed FC when disabling accessibility service on some localizations
    -Improved Greek translations
    -Other bug fixes
    2
    v7.14.34 in-app update:
    -Bug fixes
    1
    Which is the Best Settings for most Power Saving without any noticeable delayed notification or missing important App running in the background updates !?

    ★ Making the Quick doz mode on "0" = no MW or MW after = 120 minutes!?

    ★ Enabling the power saving mode on screen off ! Or Disable it !?

    As i think, that each time I close the screen off, it goes into P.saving mode, then when I open the screen on, it disable the power saving ,, the more frequently i open & close the screen, that may on the contrary increase power consumption 😅🙃

    Please 🙏🏼 Advice 🤓
    Go for 0 with PSM on screen off for best standby power saving.
    Either 0 or 120(mins) will have delays for some apps (those not delivered by Google's priority Firebase Cloud Messaging (FCM)). For specific app(s) that you don't want delays on notifications , you can disable battery optimization on the app info settings. Enalbed PSM settings may also delay notifications on some apps - depends on whether the app implemented some background tasks throttling on PSM or not. But it's unlike doze, which is enforced by the system.
    You don't have to worry about the impact of enabling and disabling on psm on screen off and on, unless you're opening and closing your screen every 5 seconds.