Netflix for Anker Nebula Cosmos Max 4K Projector
took the time to make these mods after finding the directions on
https://xdaforums.com/t/app-mod-net...v-for-uncertified-devices-by-netflix.4232373/
(i couldnt just use the ESN from netflix 4 app, instead i had to use Netflix Certification Bypass 1.1 tool, ran START PATCHER.bat, followed the prompts and it gave me the correct ESN to use, which is what i copied and pasted into the directions for editing the .smali files, this might help some users who are having incorrect ESN as thats the problem i ran into first, but after using the bypass tool, getting the correct ESN , went back to the original steps and plugged in the ESN and it worked great! then i was able to use that ESN for both versions)
**2 versions:**
*
com.netflix.ninja_8.1.2_build_3844.Mod.Cosmos.Max.4K.Projector.apk
*
com.netflix.ninja_6.1.3_build_2482.Mod.Cosmos.Max.4K.Projector.apk
**info for each:**
* 8.1.2 has 1080p working, HDR, and 5.1 Audio
* 6.1.3 has 1080p working, HDR, and 5.1 Audio and is supposed to have 4K UHD working also, cant really confirm, could be a device issue as it is a 4K projector but there's no settings to adjust resolution on the projector, and DRM info app shows 1920x1080, i can't verify 4K but the mod is working!
i used the netflix test pattern videos, but its a little confusing but there's no info button on my remote.. at the top it says 1920x1080 null when i do a test, but the lines i can see 3840x2160...but also like i mentioned its a thing i'm learning about this particular projector. its 4k but set to 1080p...i just used adb to enable 4k which did change the resolution but the settings still showed 1080p so i dont know
**if you want to test the adb to change resolution, the directions are below, but it does break some of the icons on the home screen.**
* on the projector, go to settings, device preferences, about, click on build number a bunch of times til it says developer options enabled.
* click back and in device settings you should now see developer options. click that and then enable USB Debugging.
* on your computer, you'll need to use command prompt to use adb commands (google/youtube it)
* type adb connect ###.###.###.### (replace # with your ip address)
* on the projector it should pop up a prompt to allow your computer to connect, click allow.
* type adb shell wm size 3840x2160 and hit enter (it should change within a second on your projector)
* type adb shell wm density 640 and hit enter (you can play with this number between 320-640 to see what suits you best)
* once satisfied, type adb reboot and it will reboot the projector.
* to go back to original settings, type adb shell wm size 1920x1080 and hit enter
* type adb shell wm density reset and hit enter
* type adb reboot to reboot and back to default