[APP][Q][XPOSED] GravityBox v10.1.2 for Android 10 [07/03/2021]

Search This thread

C3C076

Recognized Contributor
Dec 15, 2012
7,746
24,620
Bratislava
ceco.sk.eu.org
GravityBox - all-in-one tweak box - Xposed module for devices running Android 10
Version 10.1.2 [Q]

Version for JellyBean is available in this thread: https://forum.xda-developers.com/showthread.php?t=2316070
Version for KitKat is available in this thread: https://forum.xda-developers.com/showthread.php?t=2554049
Version for Lollipop is available in this thread: https://forum.xda-developers.com/showthread.php?t=3037566
Version for Marshmallow is available in this thread: https://forum.xda-developers.com/showthread.php?t=3251148
Version for Nougat is available in this thread: https://forum.xda-developers.com/showthread.php?t=3653953
Version for Oreo is available in this thread: https://forum.xda-developers.com/showthread.php?t=3739929
Version for Pie is available in this thread: http://forum.xda-developers.com/showthread.php?t=3908768

READ THIS POST CAREFULLY BEFORE PROCEEDING ANY FURTHER

Introduction
The app utilizes Riru and EdXposed Magisk module which uses original Xposed Framework API created by rovo89.

!!!!!! WARNING !!!!!!
This module utilizes EdXposed Framework which is still in early development stage and may contain bugs or might not be fully compatible with system of your Android device. I take no responsibility for any issues arising from using GravityBox with EdXposed and strongly recommend creating a full backup of your device before activating the module.

Requirements
- Magisk v19 or later
- Riru v19.5 or later (Magisk module)
- Official EdXposed release (Magisk module)
(CHOOSE WHATEVER VERSION WORKS BEST ON YOUR SETUP - EXPERIENCE SHOWS THAT DIFFERENT VERSIONS WORK DIFFERENTLY ON DIFFERENT DEVICES/SYSTEMS)
- EdXposed Manager (Application)
- Avoid using Resource hooking support if possible (Can be disabled in EdXposed Manager settings)

Installation
This procedure assumes you have working Magisk installation.
1) Install Riru and EdXposed modules using Magisk Manager
2) Install EdXposed Manager app
3) Reboot and open EdXposed Manager app to check if EdXposed works and is active
4) Install GravityBox and enable it in EdXposed Manager
5) Reboot

Required whitelisted packages
In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
- Android System (android)
- System UI (com.android.systemui)
- Call Management (com.android.server.telecom)
- Download Manager (com.android.providers.downloads)
- Phone (com.android.dialer or com.google.android.dialer)
- Phone (com.android.incallui) (OxygenOS only)
Note that using Blacklist/Whitelist mode in EdXposed Manager may have side effects such as Zygote not
being able to access module preferences due to SELinux restrictions which results in relevant features not being enabled even if
they are enabled in module settings. This is EdXposed limitation/glitch


Feature highlight
--- Lockscreen tweaks
--- QuickSettings tile management with additional tiles
--- Statusbar tweaks
--- Navigation bar tweaks
--- Pie controls
--- Power tweaks
--- Display tweaks
--- Phone tweaks
--- Media tweaks
--- Hardware/navigation key actions
--- GravityBox Actions - interface for 3rd party apps
--- Notification control (per-app notification LED/sounds/vibrations)
--- Fingerprint launcher
--- Advanced tuning of Framework and System UI parameters
... and many more

Compatibility
GB's main concept is to make most of the preference changes to be done on the fly without need to reboot a device to achieve custom-ROM like experience.
This means it is not possible to "completely deactivate" particular feature if it causes trouble on your device or if you installed GB because you want to use only one particular feature you can't find elsewhere.
This results in issues on ROMs/devices that have parts that are diverting from default Android implementation too much, or are running heavily modified custom ROMs.
If you experience weird issues after installing GB, even if you didn't activate a particular feature, it is not because of GB is broken, it is because it is not compatible with your ROM.
It is very similar to a situation when you installed ROM built from source for Nexus to some Xperia device - it won't work.

GB is a complex module and is not suitable for 1 purpose scenario. This means, if you are running custom ROM built from source, and you are missing a certain feature, your best option is to go ask creators of those ROMs to implement those additional features. Supplementing missing features on well-known custom ROMs built from source by installing xposed modules (especially complex ones) is definitely not a good way to go and can cause more trouble than good.
GB being a complex module, it shouldn't be combined with other complex modules often racing for the same goal. They can conflict/fight on the same playground and there's no way you can deterministically say which one's going to win. They can even lose both.

So in summary:
- this module is designed to run on vanilla or close-to-vanilla Android 10 (AOSP)
- officially supports devices/systems it was developed and tested on
- Samsung Touchwiz, HTC Sense, MIUI, LeWa, Xperia, Lenovo, etc. are NOT supported. It is not guaranteed this module will work on these at all so try at your own risk. This module is simply too complex to support all kind of ROM brands that were vastly modified by vendors.
- DO NOT USE WITH CUSTOM ROMS MODULE WAS NOT EXPLICITLY DESIGNED FOR
- I will not implement any exceptions that will adapt this module to a specific custom ROM. Please, do understand, it is unmanageable.
- I will not provide any support for devices violating these compatibility rules

GravityBox [Q] has been designed for and tested on
- OnePlus 7 Pro running OxygenOS 10
- Nexus 5X running Pixel Experience 10
- Pixel 3a running Google OS

Reporting bugs
If possible, please use Github issue reporting interface for reporting bugs.
If you experience problems with certain feature, provide the full-detailed info that can help me
to reproduce the bug and attach error.log file you'll find in:
/data/user_de/0/com.solohsu.android.edxp.manager/log
If you use different manager or there is no log file present, use ADB to capture log: adb logcat -s EdXposed-Bridge

In case you experience SystemUI crashes or other apps Force Closing, or device soft reboots, attach logcat from time
crash occurs. (use adb logcat *:E or your favorite logcat app from Play Store).
Please, don't attach big logs. Only the portion where error is clearly seen.
Disable all other xposed modules before reproducing bug to make sure it is really GravityBox related
Remember, this app was developed and tested on one particular device so it is not guaranteed that it will work flawlessly on yours.

Click here to read additional, more detailed info on Reporting bugs provided by @trjlive

Multilanguage support
Volunteers are welcome to translate GravityBox to other languages.
Simply download this file: https://github.com/GravityBox/GravityBox/raw/q/GravityBox/src/main/res/values/strings.xml
Use Notepad++ to edit strings and then send me edited file so I can include translations into next release.

Source code
GravityBox is opensource. Sources are available in my gihub: https://github.com/GravityBox/GravityBox/tree/q
If you're a dev and have some ideas for additional features, feel free to fork it, work on it and send the pull requests.

Copyright notice
https://github.com/GravityBox/GravityBox/blob/q/NOTICE

Support development
Coding, maintaining and supporting this project costs me a lot of my precious time. If you find this project useful, you are more than welcome to support its development via donation. This form of support is meant to compensate for my time dedicated to the community + eventually, help me to afford newer device to keep up with AOSP evolution thus providing continuous support as Android evolves. Thanks!

Info about premium features and PayPal transaction ID verification system
1) Those who supported development via PayPal donation can use their PayPal transaction ID to unlock premium features.
As of v2.9.5, there are two premium features:
- Backup/restore of GB settings.
- Ultimate notification control

2) If you contributed to the project by providing translations, code fragments, or by any other way
you can apply for a free transaction ID by contacting me via PM.

3) Be aware that there's a system that can identify potential transaction ID
abuse. E.g. when one ID is being used by more users. Such IDs will get blocked automatically.
This can also happen when you previously exposed your ID in public forum and other users took
advantage of it. If this is the case, contact me via PM so I can issue new, special ID.
In case you own more devices, you can use one transaction ID on up to 10 of them.

4) If you are using your own custom builds of GB for personal use, you will get hash mismatch
upon verifying your ID as verification system accepts requests only from official releases of GB.
If you want to be able to verify IDs with your custom build, contact me via PM so I can setup
a special hash for your build.
If you are using a custom build that you provide for broader group of users (e.g. in a custom ROM),
it is necessary to ask for new hash everytime your new custom version is released for public use.
These rules are based on mutual trust so please, do not violate them.

Credits
- RikkaW for creating and maintainng Riru Magisk module
- solohsu & MlgmXyysd for creating and maintaining EdExposed Magisk module
- @frank93 for donating Pixel 3a for development
- @bgcngm for his code contributions to the project
- @MohammadAG for Xperia specific contributions to the project
- @rovo89 for his ultimate Xposed framework and "Volume keys to skip track" mod
- @peptonib for starting me up with this project
- @simmac for app icon
- @romracer for Motorola specific code contributions
- @firefds for Samsung specific code contributions
- CyanogenMod project
- ParanoidAndroid project
- Slim, RootBox, AOKP, OmniROM projects
- Sergey Margaritov for ColorPickerPreference
- ArthurHub for Image cropping library
- All those who provided translations for different languages (Mr.Premise, peptonib, kidmar, ch-vox, romashko, Indiant, lelemm, oicirbaf, unavix, LuHash, WedyDQ10, mp3comanche, awaaas, liveasx, samsonbear, Eric850130, xtrem007, benjoe1, asmb111, Fatih Firinci, ...)
- and finally, all those who keep the project alive by supporting me via donations (you know who you are)

Changelog
https://github.com/GravityBox/GravityBox/blob/q/CHANGELOG.txt
 
Last edited:

C3C076

Recognized Contributor
Dec 15, 2012
7,746
24,620
Bratislava
ceco.sk.eu.org
Changelog 10.1.2 - 07/03/2021
- Clock: reverted to old hooking strategy for better compatibility
- Dialer: adjusted for compatibility with the latest Google Dialer
--- fixes muting Dialpad tones during UNC Quiet Hours

Developed and tested on:
- OnePlus 7 Pro running OxygenOS
- Pixel 3a running Google OS
- Nexus 5X running Pixel Experience

Current issues
- Power: Proximity wake up not working on OP7Pro (and maybe other devices) due to proximity sensor not reporting proper value until device is fully awaken
- Key actions: Home double-tap not working
- Key actions: Haptic-feedback on OxygenOS may feel a little delayed on keys that have actions defined; as it is performed on key release to avoid double vibrations
- Lockscreen: Changed custom carrier text won't appear immediately
- ... + potentially others mainly device/system variation specific

Design changes
- Navigation bar dimension changes require reboot

Download
https://github.com/GravityBox/GravityBox/releases/tag/v10.1.2_q
Module is also available in official Xposed Repository and LSPosed repository.

Required whitelisted packages
In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
- Android System (android)
- System UI (com.android.systemui)
- Call Management (com.android.server.telecom)
- Download Manager (com.android.providers.downloads)
- Phone (com.android.dialer or com.google.android.dialer)
- Phone (com.android.incallui) (OxygenOS only)
Note that using Blacklist/Whitelist mode in EdXposed Manager may have side effects such as Zygote not
being able to access module preferences due to SELinux restrictions which results in relevant features not being enabled even if
they are enabled in module settings. This is EdXposed limitation/glitch


Commit history
Commit history for transition from 10.1.1 to 10.1.2
 
Last edited:

WillyRy

Senior Member
Mar 9, 2011
214
91
Sisters, OR
HTC One (m7)
Nexus 9
Working pretty well right off the bat. Thanks! Gotta have my status bar brightness tweak!
OP7pro

Some tweaks are superfluous on OOS 10, but of course this mod isn't exclusive to OOS.
Haven't yet tested if enabling both stock and GB tweaks simultaneously causes hiccups

Humble request eventually. I've been trying out OOS gestures; it would be cool to add tweaks to those such as slide and hold back gesture for custom actions.

Great work!
 

buzzaldrine

Senior Member
Apr 23, 2016
116
9
Changelog 10.0.0-beta-1 - 28/09/2019
- Initial beta version for Android 10

Developed and tested on:
- OnePlus 7 Pro running OxygenOS

Current issues
- Power: Proximity wake up not working on OP7Pro (and maybe other devices) due to proximity sensor not reporting proper value until device is fully awaken
- Key actions: Home double-tap not working
- Key actions: Haptic-feedback on OxygenOS may feel a little delayed on keys that have actions defined; as it is performed on key release to avoid double vibrations
- Key actions: action to kill foreground app not working
- Lockscreen: Changed custom carrier text won't appear immediately
- Media: Expanded volume panel is not linked to stock expand button functionality of OxygenOS
- ... + potentially others mainly device/system variation specific

Design changes
- Navigation bar dimension changes require reboot

EdXposed related recommendations
- For OxygenOS, make sure to use version with a Bootloop fix from here: https://github.com/ElderDrivers/EdXposed/pull/354 (YAHFA version seems to be more stable)
- Keep Resource hooking support disabled in EdXposed Installer settings if possible, as EdXposed doesn't seem to be stable enough in that part

Download
https://github.com/GravityBox/GravityBox/releases/tag/v10.0.0-beta-1_q
Module will be available in Xposed Repository as soon as it is considered stable enough.

Required whitelisted packages
In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
- Android System (android)
- System UI (com.android.systemui)
- Call Management (com.android.server.telecom)
- Download Manager (com.android.providers.downloads)
- Phone (com.android.dialer or com.google.android.dialer)
- Phone (com.android.incallui) (OxygenOS only)

Commit history
Full commit history for migration from Pie to Q


i just installed this and made a few mods on my status bar etc. do you happen to know if this cause battery drain?
 
  • Like
Reactions: Jiggs82

DanGLES3

Senior Member
Nov 11, 2017
735
720
If I set both navbar heights to 0 and reboot everything seems fine, until I go into landscape then back to portrait, the navbar comes back in portrait (it still remains hidden in landscape)
LOS 17
Moto G3
Edxposed 4.5.5 sandhook
Gravity Box V10 beta-1

While ik custom rom support isn't guaranteed, LOS17 codebase at the moment is very close to AOSP and they've yet to add any navbar customization

Also the reason for me to set navbar heights to 0 instead of disabling the navbar outright is that the back gesture of Q relies on the navbar being enabled while the bottom swipe gestures don't need a navbar to work
 
Last edited:

Skittles9823

Recognized Contributor
  • Jan 9, 2015
    1,810
    2,051
    22
    Sydney
    Any possibility of a 4G/LTE toggle on Q. As well as a toggle for LTE+ as some carriers disable said icons in certain regions.

    Sent from my Google Pixel 3a XL using XDA Labs

    ---------- Post added at 06:35 AM ---------- Previous post was at 06:06 AM ----------

    If I set both navbar heights to 0 and reboot everything seems fine, until I go into landscape then back to portrait, the navbar comes back in portrait (it still remains hidden in landscape)
    Also, can confirm this happens on stock for me to.

    Sent from my Google Pixel 3a XL using XDA Labs
     
    • Like
    Reactions: DanGLES3

    C3C076

    Recognized Contributor
    Dec 15, 2012
    7,746
    24,620
    Bratislava
    ceco.sk.eu.org
    i just installed this and made a few mods on my status bar etc. do you happen to know if this cause battery drain?
    GravityBox is designed with care regarding battery consumption, so no, there shouldn't be any unexpected battery drain nor long-term wake locks.

    If I set both navbar heights to 0 and reboot everything seems fine, until I go into landscape then back to portrait, the navbar comes back in portrait (it still remains hidden in landscape)
    LOS 17
    Moto G3
    Edxposed 4.5.5 sandhook
    Gravity Box V10 beta-1

    While ik custom rom support isn't guaranteed, LOS17 codebase at the moment is very close to AOSP and they've yet to add any navbar customization

    Also the reason for me to set navbar heights to 0 instead of disabling the navbar outright is that the back gesture of Q relies on the navbar being enabled while the bottom swipe gestures don't need a navbar to work

    Any possibility of a 4G/LTE toggle on Q. As well as a toggle for LTE+ as some carriers disable said icons in certain regions.
    Also, can confirm this happens on stock for me to.
    Sent from my Google Pixel 3a XL using XDA Labs
    There was config_show4GForLTE in GravityBox / Advanced Tuning / SystemUI available in Pie but it's no longer there on Q so it seems like it was removed in Q.

    Regarding navbar 0 dimensions. Hard to tell as I can't reproduce on OP7Pro.
    This feature overrides framework config values so it is quite mystery to me that different values could be read from config after orientation change.
    Resource config value replacement happens no matter what orientation, and always when config values are referenced.

    Also, when your device has vertical navbar in ladnscape, you must set "Navigation bar width" to 0 instead of landscape height.

    Edit: also try what kind of results you get when activating Expanded desktop using "Hide navigation bar" mode.
    (Expanded desktop mode can be set in Display tweaks. Expanded desktop mode can be activated either from the power menu or using QS tile
    Current Expanded desktop state is persisted across reboots).
     
    Last edited:
    • Like
    Reactions: mauam and 1jkan

    M7mD.Sa3eD

    Senior Member
    Nov 11, 2015
    132
    132
    Is that padding normal ?
    and WiFi with Vibration Mode disappeared
     

    Attachments

    • Screenshot_20190930-112133.png
      Screenshot_20190930-112133.png
      32.8 KB · Views: 806

    Skittles9823

    Recognized Contributor
  • Jan 9, 2015
    1,810
    2,051
    22
    Sydney
    There was config_show4GForLTE in GravityBox / Advanced Tuning / SystemUI available in Pie but it's no longer there on Q so it seems like it was removed in Q.
    Well that's unfortunate. I'll have to speak to my carrier and see if I can get it changed, or something. I doubt they'll go through with it but it's worth a shot.

    Sent from my Google Pixel 3a XL using XDA Labs
     

    FcukBloat

    Senior Member
    Jun 18, 2012
    6,267
    3,004
    can't try this module as after installing riru and edxposed modules I get a bootloop :(

    you know what I am doing wrong maybe? I am on pixel 3 with official Q, rooted with magisk canary latest version, and just installed the two apk's mentioned and the two modules below:

    magisk-EdXposed-SandHook-v0.4.5.1_beta.4463.-release.zip
    magisk-riru-core-v19.5.zip


    any clue? tia ;)
     

    Skittles9823

    Recognized Contributor
  • Jan 9, 2015
    1,810
    2,051
    22
    Sydney
    can't try this module as after installing riru and edxposed modules I get a bootloop :(

    you know what I am doing wrong maybe? I am on pixel 3 with official Q, rooted with magisk canary latest version, and just installed the two apk's mentioned and the two modules below:

    magisk-EdXposed-SandHook-v0.4.5.1_beta.4463.-release.zip
    magisk-riru-core-v19.5.zip


    any clue? tia ;)
    Try switching to the Yahfa backend. I had the same issue as well initially but after switching all was fine. It seems to be far more stable compared to sandhook.

    Sent from my Google Pixel 3a XL using XDA Labs
     

    FcukBloat

    Senior Member
    Jun 18, 2012
    6,267
    3,004
    Try switching to the Yahfa backend. I had the same issue as well initially but after switching all was fine. It seems to be far more stable compared to sandhook.

    Sent from my Google Pixel 3a XL using XDA Labs

    thanks will try as soon as I hopefully fix the bootloop, didn't consider the YAHFA version because was reported to be for OOS. will see thanks again!
     
    Last edited:

    HpNoTiQ

    Senior Member
    Feb 26, 2015
    92
    40
    Hi,
    Just installed Q version but at the same time that XPRIVACY which caught me in a bootloop...
    Now it's fully working on my Pixel 3A running QP1A.190711.020.C3, EXKERNEL and XPOSED 4470 (last canary).
    I'm also becoming a donator since I've used your plugin since my 1st android device running kit kat!
    Thanks a lot!

    Edit : Been using Sandhook version.
    First bug : after enabling more steps to audio control, process android.media gets a lot of forced closed.
     
    Last edited:
    • Like
    Reactions: C3C076
    Systemless? I use GPay all the time and I want to try this out. Magisk hide works right now and idk if it will work with GB.
    EdXposed passes SafetyNet and uses Magisk, so yes it is 'systemless' :)
    can't try this module as after installing riru and edxposed modules I get a bootloop :(

    you know what I am doing wrong maybe? I am on pixel 3 with official Q, rooted with magisk canary latest version, and just installed the two apk's mentioned and the two modules below:

    magisk-EdXposed-SandHook-v0.4.5.1_beta.4463.-release.zip
    magisk-riru-core-v19.5.zip


    any clue? tia ;)
    Because you didn't read much regarding EdXposed compatibility. The stable release of EdXposed is still not compatible with Q. You need to use the fix zips which are available under Pull Requests in GitHub page of EdXposed.

    Sent from my #FlagshipKiller6T using Tapatalk
     

    FcukBloat

    Senior Member
    Jun 18, 2012
    6,267
    3,004
    EdXposed passes SafetyNet and uses Magisk, so yes it is 'systemless' :)Because you didn't read much regarding EdXposed compatibility. The stable release of EdXposed is still not compatible with Q. You need to use the fix zips which are available under Pull Requests in GitHub page of EdXposed.
    thanks. well i followed information and links in requirements section in OP... now i realize the yahfa version linked is the fixed one, the sandhook version links to the old non-fixed one
     

    Top Liked Posts

    • There are no posts matching your filters.
    • 103
      GravityBox - all-in-one tweak box - Xposed module for devices running Android 10
      Version 10.1.2 [Q]

      Version for JellyBean is available in this thread: https://forum.xda-developers.com/showthread.php?t=2316070
      Version for KitKat is available in this thread: https://forum.xda-developers.com/showthread.php?t=2554049
      Version for Lollipop is available in this thread: https://forum.xda-developers.com/showthread.php?t=3037566
      Version for Marshmallow is available in this thread: https://forum.xda-developers.com/showthread.php?t=3251148
      Version for Nougat is available in this thread: https://forum.xda-developers.com/showthread.php?t=3653953
      Version for Oreo is available in this thread: https://forum.xda-developers.com/showthread.php?t=3739929
      Version for Pie is available in this thread: http://forum.xda-developers.com/showthread.php?t=3908768

      READ THIS POST CAREFULLY BEFORE PROCEEDING ANY FURTHER

      Introduction
      The app utilizes Riru and EdXposed Magisk module which uses original Xposed Framework API created by rovo89.

      !!!!!! WARNING !!!!!!
      This module utilizes EdXposed Framework which is still in early development stage and may contain bugs or might not be fully compatible with system of your Android device. I take no responsibility for any issues arising from using GravityBox with EdXposed and strongly recommend creating a full backup of your device before activating the module.

      Requirements
      - Magisk v19 or later
      - Riru v19.5 or later (Magisk module)
      - Official EdXposed release (Magisk module)
      (CHOOSE WHATEVER VERSION WORKS BEST ON YOUR SETUP - EXPERIENCE SHOWS THAT DIFFERENT VERSIONS WORK DIFFERENTLY ON DIFFERENT DEVICES/SYSTEMS)
      - EdXposed Manager (Application)
      - Avoid using Resource hooking support if possible (Can be disabled in EdXposed Manager settings)

      Installation
      This procedure assumes you have working Magisk installation.
      1) Install Riru and EdXposed modules using Magisk Manager
      2) Install EdXposed Manager app
      3) Reboot and open EdXposed Manager app to check if EdXposed works and is active
      4) Install GravityBox and enable it in EdXposed Manager
      5) Reboot

      Required whitelisted packages
      In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
      - Android System (android)
      - System UI (com.android.systemui)
      - Call Management (com.android.server.telecom)
      - Download Manager (com.android.providers.downloads)
      - Phone (com.android.dialer or com.google.android.dialer)
      - Phone (com.android.incallui) (OxygenOS only)
      Note that using Blacklist/Whitelist mode in EdXposed Manager may have side effects such as Zygote not
      being able to access module preferences due to SELinux restrictions which results in relevant features not being enabled even if
      they are enabled in module settings. This is EdXposed limitation/glitch


      Feature highlight
      --- Lockscreen tweaks
      --- QuickSettings tile management with additional tiles
      --- Statusbar tweaks
      --- Navigation bar tweaks
      --- Pie controls
      --- Power tweaks
      --- Display tweaks
      --- Phone tweaks
      --- Media tweaks
      --- Hardware/navigation key actions
      --- GravityBox Actions - interface for 3rd party apps
      --- Notification control (per-app notification LED/sounds/vibrations)
      --- Fingerprint launcher
      --- Advanced tuning of Framework and System UI parameters
      ... and many more

      Compatibility
      GB's main concept is to make most of the preference changes to be done on the fly without need to reboot a device to achieve custom-ROM like experience.
      This means it is not possible to "completely deactivate" particular feature if it causes trouble on your device or if you installed GB because you want to use only one particular feature you can't find elsewhere.
      This results in issues on ROMs/devices that have parts that are diverting from default Android implementation too much, or are running heavily modified custom ROMs.
      If you experience weird issues after installing GB, even if you didn't activate a particular feature, it is not because of GB is broken, it is because it is not compatible with your ROM.
      It is very similar to a situation when you installed ROM built from source for Nexus to some Xperia device - it won't work.

      GB is a complex module and is not suitable for 1 purpose scenario. This means, if you are running custom ROM built from source, and you are missing a certain feature, your best option is to go ask creators of those ROMs to implement those additional features. Supplementing missing features on well-known custom ROMs built from source by installing xposed modules (especially complex ones) is definitely not a good way to go and can cause more trouble than good.
      GB being a complex module, it shouldn't be combined with other complex modules often racing for the same goal. They can conflict/fight on the same playground and there's no way you can deterministically say which one's going to win. They can even lose both.

      So in summary:
      - this module is designed to run on vanilla or close-to-vanilla Android 10 (AOSP)
      - officially supports devices/systems it was developed and tested on
      - Samsung Touchwiz, HTC Sense, MIUI, LeWa, Xperia, Lenovo, etc. are NOT supported. It is not guaranteed this module will work on these at all so try at your own risk. This module is simply too complex to support all kind of ROM brands that were vastly modified by vendors.
      - DO NOT USE WITH CUSTOM ROMS MODULE WAS NOT EXPLICITLY DESIGNED FOR
      - I will not implement any exceptions that will adapt this module to a specific custom ROM. Please, do understand, it is unmanageable.
      - I will not provide any support for devices violating these compatibility rules

      GravityBox [Q] has been designed for and tested on
      - OnePlus 7 Pro running OxygenOS 10
      - Nexus 5X running Pixel Experience 10
      - Pixel 3a running Google OS

      Reporting bugs
      If possible, please use Github issue reporting interface for reporting bugs.
      If you experience problems with certain feature, provide the full-detailed info that can help me
      to reproduce the bug and attach error.log file you'll find in:
      /data/user_de/0/com.solohsu.android.edxp.manager/log
      If you use different manager or there is no log file present, use ADB to capture log: adb logcat -s EdXposed-Bridge

      In case you experience SystemUI crashes or other apps Force Closing, or device soft reboots, attach logcat from time
      crash occurs. (use adb logcat *:E or your favorite logcat app from Play Store).
      Please, don't attach big logs. Only the portion where error is clearly seen.
      Disable all other xposed modules before reproducing bug to make sure it is really GravityBox related
      Remember, this app was developed and tested on one particular device so it is not guaranteed that it will work flawlessly on yours.

      Click here to read additional, more detailed info on Reporting bugs provided by @trjlive

      Multilanguage support
      Volunteers are welcome to translate GravityBox to other languages.
      Simply download this file: https://github.com/GravityBox/GravityBox/raw/q/GravityBox/src/main/res/values/strings.xml
      Use Notepad++ to edit strings and then send me edited file so I can include translations into next release.

      Source code
      GravityBox is opensource. Sources are available in my gihub: https://github.com/GravityBox/GravityBox/tree/q
      If you're a dev and have some ideas for additional features, feel free to fork it, work on it and send the pull requests.

      Copyright notice
      https://github.com/GravityBox/GravityBox/blob/q/NOTICE

      Support development
      Coding, maintaining and supporting this project costs me a lot of my precious time. If you find this project useful, you are more than welcome to support its development via donation. This form of support is meant to compensate for my time dedicated to the community + eventually, help me to afford newer device to keep up with AOSP evolution thus providing continuous support as Android evolves. Thanks!

      Info about premium features and PayPal transaction ID verification system
      1) Those who supported development via PayPal donation can use their PayPal transaction ID to unlock premium features.
      As of v2.9.5, there are two premium features:
      - Backup/restore of GB settings.
      - Ultimate notification control

      2) If you contributed to the project by providing translations, code fragments, or by any other way
      you can apply for a free transaction ID by contacting me via PM.

      3) Be aware that there's a system that can identify potential transaction ID
      abuse. E.g. when one ID is being used by more users. Such IDs will get blocked automatically.
      This can also happen when you previously exposed your ID in public forum and other users took
      advantage of it. If this is the case, contact me via PM so I can issue new, special ID.
      In case you own more devices, you can use one transaction ID on up to 10 of them.

      4) If you are using your own custom builds of GB for personal use, you will get hash mismatch
      upon verifying your ID as verification system accepts requests only from official releases of GB.
      If you want to be able to verify IDs with your custom build, contact me via PM so I can setup
      a special hash for your build.
      If you are using a custom build that you provide for broader group of users (e.g. in a custom ROM),
      it is necessary to ask for new hash everytime your new custom version is released for public use.
      These rules are based on mutual trust so please, do not violate them.

      Credits
      - RikkaW for creating and maintainng Riru Magisk module
      - solohsu & MlgmXyysd for creating and maintaining EdExposed Magisk module
      - @frank93 for donating Pixel 3a for development
      - @bgcngm for his code contributions to the project
      - @MohammadAG for Xperia specific contributions to the project
      - @rovo89 for his ultimate Xposed framework and "Volume keys to skip track" mod
      - @peptonib for starting me up with this project
      - @simmac for app icon
      - @romracer for Motorola specific code contributions
      - @firefds for Samsung specific code contributions
      - CyanogenMod project
      - ParanoidAndroid project
      - Slim, RootBox, AOKP, OmniROM projects
      - Sergey Margaritov for ColorPickerPreference
      - ArthurHub for Image cropping library
      - All those who provided translations for different languages (Mr.Premise, peptonib, kidmar, ch-vox, romashko, Indiant, lelemm, oicirbaf, unavix, LuHash, WedyDQ10, mp3comanche, awaaas, liveasx, samsonbear, Eric850130, xtrem007, benjoe1, asmb111, Fatih Firinci, ...)
      - and finally, all those who keep the project alive by supporting me via donations (you know who you are)

      Changelog
      https://github.com/GravityBox/GravityBox/blob/q/CHANGELOG.txt
      62
      Changelog 10.1.2 - 07/03/2021
      - Clock: reverted to old hooking strategy for better compatibility
      - Dialer: adjusted for compatibility with the latest Google Dialer
      --- fixes muting Dialpad tones during UNC Quiet Hours

      Developed and tested on:
      - OnePlus 7 Pro running OxygenOS
      - Pixel 3a running Google OS
      - Nexus 5X running Pixel Experience

      Current issues
      - Power: Proximity wake up not working on OP7Pro (and maybe other devices) due to proximity sensor not reporting proper value until device is fully awaken
      - Key actions: Home double-tap not working
      - Key actions: Haptic-feedback on OxygenOS may feel a little delayed on keys that have actions defined; as it is performed on key release to avoid double vibrations
      - Lockscreen: Changed custom carrier text won't appear immediately
      - ... + potentially others mainly device/system variation specific

      Design changes
      - Navigation bar dimension changes require reboot

      Download
      https://github.com/GravityBox/GravityBox/releases/tag/v10.1.2_q
      Module is also available in official Xposed Repository and LSPosed repository.

      Required whitelisted packages
      In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
      - Android System (android)
      - System UI (com.android.systemui)
      - Call Management (com.android.server.telecom)
      - Download Manager (com.android.providers.downloads)
      - Phone (com.android.dialer or com.google.android.dialer)
      - Phone (com.android.incallui) (OxygenOS only)
      Note that using Blacklist/Whitelist mode in EdXposed Manager may have side effects such as Zygote not
      being able to access module preferences due to SELinux restrictions which results in relevant features not being enabled even if
      they are enabled in module settings. This is EdXposed limitation/glitch


      Commit history
      Commit history for transition from 10.1.1 to 10.1.2
      46
      What happened no more development. Still at beta

      Oh sorry bro. There is paid option too. So i thought it might be a part of his living. Thanks for the info. I was keep following to the project to get new features that's why i concerned about. If it was stopped i can stop looking in this thread.

      I wouldn't give up hope so easily. According to the source code linked in the OP, the last added change was added 2 months ago. Updates for this mod come every couple of months, I think. Just cause there's no update doesn't mean it's dead, so hang on just a little longer :fingers-crossed:

      Do you know that this is not his job, but a hobby? And he uses whatever free time he have after his real job and family?

      Hello everyone. Long time no see.

      Just couple of words to keep you up to date.
      Yes, development speed went down tremendously compared to 7 years ago when this project was started and there were like weekly updates often bringing a lot of new features every week, etc.
      The thing is I am feeling less and less motivated with every new Android version which always brings new restrictions, security measures and thus affects how Xposed Framework works.
      Another issue is how behaviour is inconsistent regarding different devices and systems. Nowadays the majority of issues users have are coming from some incompatibilities in the framework.
      Such type of development, when your work is based on something which is quite experimental and inconsistent, is not giving me the pleasure you would expect from doing your hobby.
      This is also the reason why module is still treated as beta, although it may seem to work perfectly on some systems.

      Just to make sure - I am NOT abandoning the project completely. I'm just waiting for a moment that gives me enough motivation to get back to it. And it will probably come sooner or later, I believe.
      For now, please try to understand and accept my position and enjoy what we currently have as it's the outcome of years of dedication and of course, your support. Thanks!
      36
      Version 10.0.0-beta-7 available

      Changelog 10.0.0-beta-7 - 21/06/2020
      - Clock: changed hooking strategy to avoid EdXposed ART crashes
      - Clock: keep master switch for Clock tweaks off by default (thanks to aviraxp)
      - TrafficMeter: fixed not working when data saver is enabled
      - Updated Turkish translations (thanks to Fatih Firinci)

      Download
      https://github.com/GravityBox/GravityBox/releases/tag/v10.0.0-beta-7_q

      Commit history
      Commit history for transition from 10.0.0-beta-6 to 10.0.0-beta-7
      23
      Version 10.0.0-beta-6 available

      Changelog 10.0.0-beta-6 - 23/12/2019
      - Location tiles: adjusted for changes since SDK 28:
      --- fixed GPS tile to show proper state when location is fixed
      --- adjusted SlimKat style tile to work with Location providers instead of deprecated modes:
      ------- Battery saving: uses network provider
      ------- Device only: uses GPS provider (GPS sensor)
      ------- High accuracy: uses both providers
      ------- (provider modes are deprecated as well which means SlimKat tile will be removed in the future)
      - Adjusted device locked state related features for the recent Android 10 changes:
      --- fixes QS Tile protection
      --- fixes Lockscreen Direct and Smart unlock
      --- fixes other related features such as GravityBox Action protection on lock screen
      - Added logic for identifying OnePlus7T/7Tpro as device running OxygenOS ROM
      --- should fix/improve features that contain OxygenOS specifics on OnePlus 7T/7Tpro
      - Updated Chinese (Simplified) translations (thanks to liveasx)

      Download
      https://github.com/GravityBox/GravityBox/releases/tag/v10.0.0-beta-6_q

      Commit history
      Commit history for transition from 10.0.0-beta-5 to 10.0.0-beta-6
    Our Apps
    Get our official app!
    The best way to access XDA on your phone
    Nav Gestures
    Add swipe gestures to any Android
    One Handed Mode
    Eases uses one hand with your phone