Archos Hello 7 (AC70) Flash firmware

Search This thread

K-BOX2022

Senior Member
Hello,
If I can help you, I create a zip file with Driver, Firmware and the compatible SP_Flash for this firmware.
I flashed my Hello with success and I don't sure of all step, cause many test before sucess.
Just put WIN10 in "Test Mode" can help

http://dl.free.fr/getfile.pl?file=/Zn8HQVpO

press "Valider et télécharger le fichier"

Now I am in GSI Android and the Hello work perfectly !
Hey. Could you share Firmware Archos For me? Please. I brick my tablet
 

K-BOX2022

Senior Member
I re-upload the november 7 file on 1fichier.
https://1fichier.com/?cfza1lpzfl2edgpc8tqd

For information I still not success to flash my Hello 7, so I sent it to Archos for repair, I'm waiting for a response.
Do you know how to enter fastboot mode. I have it unlocked but it stands on Orange State Warning for 5 seconds and then resets and nothing. I cannot go to the boot section (Recovery, Fastboot, Normal). Do you have any idea how to get into fastboot? Grettings
 

Dawnowl444

Senior Member
Jul 28, 2020
62
2
Do you know how to enter fastboot mode. I have it unlocked but it stands on Orange State Warning for 5 seconds and then resets and nothing. I cannot go to the boot section (Recovery, Fastboot, Normal). Do you have any idea how to get into fastboot? Grettings
Normally, you just maintain the volume plus (or maybe minus can't remember) button while powering it on.
But if you can't acess that you bricked yours further than mine...
I can acess this menu but it crash immediatly after that
 
  • Like
Reactions: CameleonTH

buzz-27

Senior Member
Jul 4, 2009
124
11
I guys.
after a new pass in my files, i send again the archive file but with a little old firmware inside.
I almost sure to have flashed the 20180912 version before the 20181031 of my first archive
I hope a better result with this package , because only a good mix of firmware / SP and driver work.
 
  • Like
Reactions: CameleonTH

K-BOX2022

Senior Member
123.png
 

tomtom666

Member
Mar 27, 2011
41
4
Hello All..

I was messing with my Hello 7, wanted to install TWRP but messed it up.
Dont know what went wrong.. maby te wrong recovery..
Now it was stuck in bootloop..and could not get it out..
Was trying to install the drivers to use the flash tool and it would not recconise the device.

I think my battery is dead now, it only makes a noise wen I plug it in de pc, and the screen doesn't do anything :confused:

I did find out how to get it in fast boot or recovery.

Make shure it is turned off.
Then press the volume up for recovery or volume down for fastboot.
Keep it pressed and plug in the power cabel.
Keep it pressed in untill you get the screen you want.

Hope this helps a bit :)
 

K-BOX2022

Senior Member
Hello All..

I was messing with my Hello 7, wanted to install TWRP but messed it up.
Dont know what went wrong.. maby te wrong recovery..
Now it was stuck in bootloop..and could not get it out..
Was trying to install the drivers to use the flash tool and it would not recconise the device.

I think my battery is dead now, it only makes a noise wen I plug it in de pc, and the screen doesn't do anything :confused:

I did find out how to get it in fast boot or recovery.

Make shure it is turned off.
Then press the volume up for recovery or volume down for fastboot.
Keep it pressed and plug in the power cabel.
Keep it pressed in untill you get the screen you want.

Hope this helps a bit :)
Nothing. It hangs on the Archos logo all the time
 

K-BOX2022

Senior Member
Here I started the Forum and I am trying to figure out how to fix it with Hovatek. I recommend visiting. Maybe someone just comes up with a brilliant idea how to fix it.

 
  • Like
Reactions: Dawnowl444

tomtom666

Member
Mar 27, 2011
41
4
Nothing. It hangs on the Archos logo all the time
The same here on my Hello7..:(
On my Hello10 this is the way to get into the bootloader or recovery.
On my bricked Hello7 I can get it in Mediatec preloader usb vcom mode, but wen I disconnect en reconnect the usb cable it is no longer reconized.

I think I have read everything on how to fix it.
We need to unlock or bypass the secureboot.
@ buzz-27 or anyone else.. can you maybe share the DA File Archos send you?
This seems to be the only way to get it up and runing again.

To bypass the mtk you need to boot past the archos screen I think...
but I am running in to the same issues testing it on my Hello10.
 

K-BOX2022

Senior Member
The same here on my Hello7..:(
On my Hello10 this is the way to get into the bootloader or recovery.
On my bricked Hello7 I can get it in Mediatec preloader usb vcom mode, but wen I disconnect en reconnect the usb cable it is no longer reconized.

I think I have read everything on how to fix it.
We need to unlock or bypass the secureboot.
@ buzz-27 or anyone else.. can you maybe share the DA File Archos send you?
This seems to be the only way to get it up and runing again.

To bypass the mtk you need to boot past the archos screen I think...
but I am running in to the same issues testing it on my Hello10.
How to switch it from Mediatek preloader usb vcom mode to fastboot mode because it hangs on the Archos logo all the time. And if I want to turn it off To Power and Volume + or -?
 

tomtom666

Member
Mar 27, 2011
41
4
How to switch it from Mediatek preloader usb vcom mode to fastboot mode because it hangs on the Archos logo all the time. And if I want to turn it off To Power and Volume + or -?
The Mediatek preloader usb vcom mode aka Brom mode.
I can only in this mode or rebooting on Archos logo.

Wen in brom mode you can only power it down..pressing the power button for 20 secconds.
I Cant get in to fastboot eighter..
I also tryed the phyton script to by pass the mtk but get errors at the end.
These I wil look in to later when I get home.
 

Top Liked Posts