Ok, i checked the log and even though i have 700MB free on /system, it says:That is something we certainly need to address whenever convenient for you. :good:
Thanks a ton, I used ur customize.prop file and Sony effects working now.(though dsee hx setting doesn't seem to affect sound even in lossy files)This is my setup. I have only chosen these 3 things to install
Have you put true after either Deluxe ICE or Ultra ICE? They should be just above the config options. Check those.Thanks a ton, I used ur customize.prop file and Sony effects working now.(though dsee hx setting doesn't seem to affect sound even in lossy files)
Anyways, cud u help me with icesound in non aroma installer. Whenever I try to flash the non aroma zip(3.31), it replies "Icesound module must be installed in order to select Iceconfig".What does this mean? Is there some way to sort this out?
Thanks again..
That's a ROM thing.What is the module that controls the navbar visualizer?
Thanks a ton, I used ur customize.prop file and Sony effects working now.(though dsee hx setting doesn't seem to affect sound even in lossy files)
Anyways, cud u help me with icesound in non aroma installer. Whenever I try to flash the non aroma zip(3.31), it replies "Icesound module must be installed in order to select Iceconfig".What does this mean? Is there some way to sort this out?
Thanks again..
Yeah before you check the config and she style: (pure, wide clarity etc) I had to install the main ICE module first similar to the core arise module. Then I had to go back in and install the config and styleHave you put true after either Deluxe ICE or Ultra ICE? They should be just above the config options. Check those.
I am using RR Sultanized 6.0.1, the first few times I installed 3.31, either Aroma or Modular, it worked each time. I cleaned flashed ROM this last time and now it is not working. Any ideas?Have you put true after either Deluxe ICE or Ultra ICE? They should be just above the config options. Check those.
---------- Post added at 06:15 PM ---------- Previous post was at 06:14 PM ----------
That's a ROM thing.
I am using AICP, but then when using the magisk compatibility module, both Dolby and DTS crash repeatedly, I need to set my SELinux to permissive, but then I will break safetynet if that's the case. So I searched for the magisk multiple audio mod module [email protected], and used them both side by side with the magisk ARISE module, sadly, my baseband broke, didnt get any signal, and by uninstalling one of em will make things right. Anyone also having this issue?
El Psy Congroo
If it helps anyone, I've gotten V4A and DDP to work on my ol' HTC One M7 running AICP (14/04/17) with SELinux enforcing. This is via the Modular installer.
I'm not using any modules in Magisk v12, just enabled BusyBox under Magisk's settings. I'm also not using SuperSU.
Then I set core, V4A_2.5.0.5, V4A_profiles, DDplus to true and install.qc.effects=ANDROID_O.
V4A needed to have each profile switched off and on again to enable processing, and DDP sometimes FC but if it does it functions normally the next time I start it.
I am using AICP, but then when using the magisk compatibility module, both Dolby and DTS crash repeatedly, I need to set my SELinux to permissive, but then I will break safetynet if that's the case. So I searched for the magisk multiple audio mod module [email protected], and used them both side by side with the magisk ARISE module, sadly, my baseband broke, didnt get any signal, and by uninstalling one of em will make things right. Anyone also having this issue?
I just wanna ask if my modules on ARISE will still work. I dont know how to look on this, so here is my audio.effects_confhttp://cloud.tapatalk.com/s/58f94fa13c547/audio_effects.conf
Can someone please take a look at this. Thanks.
Here is the screenshot of my magisk module
El Psy Congroo
Installed ARISE 3.31 on Nougat 7.1.2 Xenon HD.
And everything work fine! ****!! So ****ing perfect!!
Install Core
Viper 2.5.0
Dirac module
Toolbox
Android_O custom
Remove deep buffer
Ice Sound ultra
Ice Sound Config 2
Too modify a little bit the Mixer_path and add other profiles for ViperArise.
how to check everything's working?
Everything that is present on the terminal emulator is working? Is that it?through terminal emulator.
su
dumpsys media.audio_flinger > /sdcard/dumpsys.txt
and through matlog.:good:
"err on the side of kindness"
# ARISE Sound Systems™ 20170424
#
# Magnum Opus
#
# /sdcard/arise_customize.prop
#
# www.arisesound.com
## !! This archive contains 300MB of data.
## !! Navigate to /system to ensure
## !! sufficient space is available in
## !! /system before flashing.
# Module description and information can be found in META-INF/getting_started/modules.
# The ARISE™ modular installation zip works by using this file (when present in /sdcard as /sdcard/arise_customize.prop) to determine if any modules are to be installed by a value of "true" for each line below.
# Any value other than "true" is the same as a value of "false".
# Add a value of "true" to desired add-on(s). Example:
install.xxxx=true
# The Core System module must be installed at least once and only once. Once the core module is installed, the value of "true" should be removed for future customization installing, uninstalling, or executing scripts and modules.
# If a rom update or system wipe is performed resulting in the need to reinstall the sound system, edit /sdcard/arise_customize.prop to include a value of "true" for the core module to complete your sound system installation, followed by removing the value of "true" from the core module once booted.
## START ##
install.core=
(40MB-175MB)
# Select either ViPER4Arise™ version below to be installed or ignore to not install ViPER4Arise™ at all.
install.v4a_2.5.0.5=
(4.5MB)
install.v4a_2.3.4.0=
(6.5MB)
# Add a value of "true" to any modules below to install.
install.v4a_profiles=
install.ddplus=
(15.3MB)
install.atmos=
(3.3MB)
install.am3d=
(3.5MB)
install.arkamys=
(170KB)
install.sony=
(70MB)
install.v4a_xhifi=
(700KB)
install.esira=
(3.6MB)
install.musicfx=
(200KB)
install.dirac=
(4.2MB)
delete.deep_buffer=
restore.deep_buffer=
repair.sdcard.permissions=
#
## Qualcomm™ Audio Effects Configuration START ##
# Qualcomm™ devices have the ability to select from four audio effects configurations using Android O (default), Asus, DAP (native Dolby Atmos), Huawei, Sony, or Stock /soundfx libraries.
# IMPORTANT!!
# If installing an audio effects configuration on a currently installed sound system, BE SURE TO INSTALL THE CURRENTLY INSTALLED MODULES AGAIN USING THE APPROPRIATE VALUES!!
# Installing Core is not necessary, but any other module IS NECESSARY so that those modules' entries are written to the new audio effects configuration!!
# As a reminder, any preferred or custom audio effects configuration can always be automatically installed during the Core System module installation by placing it directly in /sdcard named arise_effects.conf to result with /sdcard/arise_effects.conf.
ANDROID_O
ASUS
DAP
HUAWEI
SONY
STOCK
Example: install.qc.ef**cts=ANDROID_O
install.qc.effects=
## Qualcomm™ Audio Effects Configuration END ##
#
## ICEsound™ START ##
# Add a value of "true" to install the ICEsound™ module:
install.ICEsound=
(750KB)
# The following ICEsound™ configurations are available below. a value of "None" will remove an existing ICEsound™ configuration to use no ICEsound™ configuration. Values 1 (default), through 6 select the ICEsound™ configuration of the same number.
# Although, the available ICEsound™ configurations can have a substantial impact on sound quality, the different versions are provided to find the configuration most compatible with the rest of the installation with incredible sound quality.
# Because of the unpredictability of this file's impact on audio and functionality, descriptive names for the different ICEsound™ configurations are not logical and are simply numbered as they are Example:
use.ICEco**ig=1
1
2
3
4
5
6
None
use.ICEconfig=
# The following ICEsound™ presets are available below. A value of "None" will remove an existing preset to use no ICEsound™ preset. Enter a value of the preset name exactly as shown below. Example:
use.ICEsound.pr**et=01
BATHSALTS =01
DEEPBASS =02
HOLYSH*T =03
KRAZY =04
MOVIE =05
MUSIC2 =06
OUTDOORS =07
PURE (default) =08
PURESH*T =09
SHAT =10
WIDECLARITY =11
Default (pure) =12
None =None
use.ICEsound.preset=
## ICEsound™ END ##
# The ARISE™ modular installation zip works by using this file (when present in /sdcard as /sdcard/arise_customize.prop) to determine if any modules are to be UNINSTALLED by the value of "true" for each line below.
# Any value other than "true" is the same as a value of "false".
UNINSTALL.v4a=
UNINSTALL.atmos=
UNINSTALL.ddplus=
UNINSTALL.arkamys=
UNINSTALL.ICEsound=
UNINSTALL.am3d=
UNINSTALL.sony=
UNINSTALL.esira=
UNINSTALL.v4a_xhifi=
UNINSTALL.musicfx=
UNINSTALL.dirac=
## END ##
su
su -c dumpsys media.audio_flinger
su
dumpsys media.audio_flinger
[B]## Magnum Opus™ 20170506[/B] -
- More booted script corrections/enhancements.
- Enhanced the $SDCARD variable during recovery.
- Android O LDAC Bluetooth™ codec reassigned
as a satisfied scenario component.
- Experimental build with arisesound_setprop
disabled, enabling requires name change from
arisesound_disabled_setprop to arisesound_setprop.
##
/data/media/0
/data/media/legacy
/mnt/runtime/write/emulated/0
/mnt/runtime/write/emulated/legacy
/sdcard
/sdcard/0
/storage/emulated/0
/storage/emulated/legacy
getprop