Development ArrowOS 13 [android-13] for POCO X3 Pro (vayu/bhima) [OFFICIAL][+arrow-12.1]
- Thread starter K001droid
- Start date
I haven’t tried it yet but i think ( evorom 13) is the same as pixel experience plus 13, which i tried, and it is a good rom too. Pixel experience plus 13 is my no. 2 favorite custom rom; it is a very good rom with a plus to customization but with some minor bugs: not so fast reader of fingerprint and pixel launcher ( and some installed apps) eat some battery but other then that is a good, fast and stable rom. There is this rom too which i haven’t tried it yet: PixelPlusUI OFFICIAL Poco X3 Pro v5.1 (https://ppui.site/device/Vayu)
I know asking for ETAs is rude, but there hasn't been any update for over a month. Does anybody know what's going on?
Site was down, 12.1 is discontinued, while 13 is still beta. And... on Telegram supportgroup of maintainer @K001sharma / kubersharma001 is not found. Very strange
I hope he's alright and nothing bad happened to him, but you never know
Me too because this rom is superb and i want to be updated to december patch too. One possible reason dev not update this rom is other developers from EvoXRom, Pixel Exp 13 and Pixel Plus UI became jealous of him, because he have a better rom, and decided to kill him. So we might say RIP to this rom guys.
kubersharma001 on Xiaomi Tab5 forum @22nov2022:
"Hello, guys. I have been super busy so I may not be posting anything on XDA and hardly anything over my TG channels. OTAs will keep releasing/builds will be up on the website."
Guess this holds true for Vayu as well... (I hope).
"Hello, guys. I have been super busy so I may not be posting anything on XDA and hardly anything over my TG channels. OTAs will keep releasing/builds will be up on the website."
Guess this holds true for Vayu as well... (I hope).
Hi everyone, I have battery drain issues with firmware 13.0.8.0 global, while with 13.0.5.0 global everything is ok. This issue occurs with ArrowOS 12.1 and 13.0 I have one of the first devices that had ghosting issues that have been fixed a few firmwares ago. Does somebody else have this issue and a solution? Best regards from cold Germany.
Install V13.0.4.0.SJUMIXM, using fastboot metod, then try again. I'm on V13.0.4.0.SJUMIXM and have no problems in ArrowOS 13; battery is by far the best with this rom.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
I've updated to 13.0.8.0 on 25 Nov.
fw_vayu_miui_VAYUGlobal_V13.0.8.0.SJUMIXM_d1f5478f78_12.0.zip
My battery life was pretty bad for 2-3 recharge cycles.
If it doesn't get better in a few days just completely empty the battery until it does the force shut down, then charge it completely and even longer.
That's what I did and I'm back to awesome battery life.
See here:
ArrowOS 13 [android-13] for POCO X3 Pro (vayu/bhima) [OFFICIAL][+arrow-12.1]
ArrowOS 12.1 [android-12L a.k.a 12.1.0] for POCO X3 Pro (vayu/bhima) /* * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have...
forum.xda-developers.com
Thanks for the feedback. I didn't try 13.0.4.0 yet. Can you help me understand what the difference between fastboot and recovery installation of firmware is? ThanksInstall V13.0.4.0.SJUMIXM, using fastboot metod, then try again. I'm on V13.0.4.0.SJUMIXM and have no problems in ArrowOS 13; battery is by far the best with this rom.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.xiaomifirmwareupdater.com
Thanks, this sounds like a reasonable approach to me. I was impatient and installed 13.0.5.0 again two times after one day of heavy drain. I will give it another try and test a longer time frameI've updated to 13.0.8.0 on 25 Nov.
fw_vayu_miui_VAYUGlobal_V13.0.8.0.SJUMIXM_d1f5478f78_12.0.zip
My battery life was pretty bad for 2-3 recharge cycles.
If it doesn't get better in a few days just completely empty the battery until it does the force shut down, then charge it completely and even longer.
That's what I did and I'm back to awesome battery life.
See here:
ArrowOS 13 [android-13] for POCO X3 Pro (vayu/bhima) [OFFICIAL][+arrow-12.1]
ArrowOS 12.1 [android-12L a.k.a 12.1.0] for POCO X3 Pro (vayu/bhima) /* * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have...
He should post here too, some people do not use telegram, anyway, how is this new release? Any issues?
Hope Kub3r is fine, seems he is disappeared all of sudden.
Last edited:
Kuber is very busy... that's all
Attachments
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
2There hasn't been any annoucements of that, I'd be happy even with 1 bigger update / month, most OEMs can't even do that2Still on 11, as it proved to be the most stable, hassle free and battery efficient rom in the ArrowOS line , maybe will try 12.1 in the future.
Why in the hell would you push yourself to update to a google trainwreck like A13 or A14 is beyond me... peer pressure? Does your willy get bigger by having latest android version?2
Android 13 is objectively better, more streamlined, secure and gives you more control over your device. Just because you don't understand/use the new features doesn't mean the OS is ****. Also it's pretty sad you feel better just because you're using an older OS XDD2
Any tests to backup that statement?
Regarding battery life.
IMHO they are all pretty similar after 1-2 weeks of settling down. -
72
ArrowOS 12.1 [android-12L a.k.a 12.1.0] for POCO X3 Pro (vayu/bhima)
Code:/* * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, We will laugh at you. * It is your fault because you chose to do all the modifications on your device. * Remember projects like these and the work done on them is a hobby to the * contributors and the team members, no one is working for you nor is getting paid for it * have some respect for the work done by them since it is done purely on interest or a hobby */
ABOUT
ArrowOS is an Android Open Source Project based Android mobile operating system started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate to us
Blog: blog.arrowos.net
Checkout more documentation at (maintainership/contributing): Check this out
WHAT WORKS?
- Almost everything
WHAT DOESN'T WORK?
- You tell me
NOTE:
- ArrowOS ships with source compiled vendor and odm partitions.
Click here to Download
Tip: Select OEM -> Device, choose Arrow version, choose the build type: "GAPPS" or "VANILLA" to download.
Suggested recovery: ArrowOS Recovery - https://sourceforge.net/projects/kubersharma001/files/vayu/ArrowOS-recovery/
Suggested firmware: Any MIUI 12.x to 13.x (S or R) firmware will work; I used MIUI 12.0.4.0, 12.5.3.0 and MIUI 13 for testing.
Instructions
FIRST INSTALL?:
- Remove any fingerprint, PIN, or password in MIUI
- Unlock the bootloader
- Transfer ROM to internal storage
- Install any suitable recovery
- Flash ROM zip file
- Do a data wipe in recovery (format data)
- Reboot to the system, wait and enjoy
- Download via OTA Updater and let it automatically install; OR
- Download an update, transfer to internal/external storage (always check file sha256)
- Reboot to recovery; Flash ROM zip and reboot.
* HOW-TO report a bug
* GAPPS and VANILLA variants
* Checking build integrity
Donate to Maintainer:
https://www.paypal.com/paypalme/kubersharma001
UPI: [email protected]
GPL compliance:
ROM Source- https://github.com/ArrowOS
Kernel Source- https://github.com/ArrowOS-Devices/android_kernel_xiaomi_vayu
You can check out my blog post on pocox3pro:Read my other blog posts on: https://k001droid.medium.com/Instructions thread for (vayu/bhima) Poco X3 Pro on ArrowOS
This blog post is dedicated to POCO X3 Pro...
medium.com
14Happy winter holidays, merry Christmas, and also a happy new year in advance.
Latest ArrowOS 12.0 builds were released on 22nd December
Include these notable changes:
- December ASB
- Fix XiaomiParts (Doze, Thermal, Dirac, and ClearSpeaker) not saving user settings after reboot
- Show 4G instead of LTE (due to heavy user requests)
- A bit faster transition animation
- Handle some unneeded logspams
- Misc fixes to XiaomiParts
- Label more wakeup nodes
- Set SSR level to workaround rare carrier/modem crashes etc.
- Misc fixes and improvements
[ Additionally, you can learn to see changes directly in my GitHub repositories by checking the commits
1. Device configuration: https://github.com/ArrowOS-Devices/android_device_xiaomi_vayu/commits/arrow-12.0
2. Kernel: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_vayu/commits/arrow-12.0
3. Vendor blobs: https://github.com/ArrowOS-Devices/android_vendor_xiaomi_vayu/commits/arrow-12.0
]
ROM changelogs can be seen here:
You can download builds from
(select arrow-12.0 and your build type. vanilla/gapps under official section)
NOTE
- Works with ANY MIUI R firmware (12.0.x.0 to 12.5.x.0)
- You can use ArrowOS Recovery (https://sourceforge.net/projects/kubersharma001/files/vayu/ArrowOS-recovery/) or TWRP
ArrowOS Christmas Wallpapers:
Dark | Light
If you like my work, please consider donating it helps me in many ways to continue such a journey:
Paypal: https://www.paypal.com/paypalme/kubersharma001
UPI: [email protected]1411.0 -> 12.0 -> 12.1 all are dirty flash, no need to format data
(I have summarized/documented it here: https://kubersharma001.com/index-arrowos-vayu-poco-x3-pro)
Lawnchair is not compatible properly with 12.1 (aosp did some changes in 12L/12.1 and lawnchair needs to rebase their source to 12.1 quickstep/launcher3 or make it compatible however that's possible otherwise)
The latest update uses MIUI13 blobs and configs, You can use any firmware from MIUI 12.x to 13.x (thanks vendor freeze lol)
[ device changelogs:
- device config/tree: https://github.com/ArrowOS-Devices/android_device_xiaomi_vayu/commits/arrow-12.1
- vendor blobs: https://github.com/ArrowOS-Devices/android_vendor_xiaomi_vayu/commits/arrow-12.1
hint: If you see till 31st march some commits are pushed via Palaych, that's me from his server user (sharing the infra server together for now, yes servers are expensive)
]
One of the most noticeable bugs on 12L (generally, and doesn't surprise) is for gapps users on a clean flash might need to set up fingerprint at setup wizard to avoid crashes (hopefully this gets fixed next ASB)
To all the DFE, unencrypted folks out there, check out the risks: https://kubersharma001.com/reasons-to-stay-encrypted-on-android-and-the-risks-otherwise
Donation:
PayPal: https://www.paypal.com/paypalme/kubersharma001
UPI: [email protected]14Official ArrowOS 13 based on Android 13 has been released!
- Stable and no known bugs, safetynet+ enforcing works
(Not all the features are ported)
arrow-12.1 released with pputils removed.
arrow-11.0 will soon release with august security patches, 2022 and pputils removed.
New method used to pass Safetynet adds a new prop which is passed as build fp via frameworks hook, those who manually want to change, can change value of:
ro.build.gms_fingerprint in system default props to whatever build fp they like. (will need root/mod/addon/magisk etc - what we set default will always pass safetynet)
If you keep my work, feel free to donate:
www.paypal.me/kubersharma001
