• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

Artemis flashing guide

Was this guide helpful.....?????


  • Total voters
    2
  • Poll closed .
Search This thread
Aug 26, 2009
12
0
Valsad, Gujarat
Hi Everybody.....,;)

I have seen a lot of people posting that they need a proper process of how to flash the HTC Artemis with a Custom ROM.

Flashing process is not so hard as it sounds. It is a very very very simple process:rolleyes:, but still some people find it very difficult to do it or they are very much afraid:mad: whether they will brick their device.

So I decided to start this post so that it could be very much helpful to a Newbie.:confused:

Do not worry guys, even I was new in this arena a year before, but now you see I have mastered this process.

Follow these simple STEPS One by One and you will see your HTC Artemis in a Brand New Custom ROM…..!!!!:D

Every post contains a Step by Step procedure.
Post 1 : Connecting your HTC Artemis to your Laptop/PC.
Post 2 : SPL Unlocking your HTC Artemis
Post 3 : Flashing Your Device


[email protected]@[email protected]:cool:
 
Aug 26, 2009
12
0
Valsad, Gujarat
POST 2

Follow these PRIMARY STEPS to connect your HTC Artemis to your Laptop/PC so that no mistake is made in connection while you flash your device.

1.First of all, insert the HTC Application CD (which you received when you purchased your device) in Disk Drive of your Laptop/PC.

2.Install Windows Active Sync from that CD into your Laptop/PC. NOTE: Do not connect your device while installing the Active Sync Software.

3.Now, once the software is installed RESTART you PC.

4.Connect you device HTC Artemis to your PC and follow the installation procedure.

5.After you complete the Installation, make sure the application looks like this.



Now, your device is connected and you need to switch to Post 2.
 

Attachments

  • PIC1.jpg
    PIC1.jpg
    20.4 KB · Views: 7
Aug 26, 2009
12
0
Valsad, Gujarat
POST 1

Now, these are the SECONDARY STEPS to prepare yourself with all the tools for flashing you HTC Artemis.;)

Before we continue, make a note of the following instructions VERY CLEARLY.
:(
NOTE: Do not DISCONNECT or LAUNCH any program in your PDA or PC during the update process.

NOTE: Please be sure that your phone battery is 100% charged before you start the update process.

NOTE: These steps are EXTREMELY necessary to be followed, because if you miss these steps, you will result in your device getting bricked.


1.First of all you need to SPL Unlock your device. For this, you need to download a software to SPL Unlock you phone.

2.You can download the Artemis USPL from the link below.

3.After you download the file, extract it and follow the instruction given.

4.Double click on the start_uspl program. A CMD window will show up and your USPL Unlocking process STARTS.

5.This process takes about 10 minutes depending upon the CPU speed, so keep patience.

6.After the process completes, the CMD window will vanish and a ROM Update Utility will start.

7.Your phone will be temporarily get disconnected from your PC but will regain connection after a few minutes. So be patient as your phone restarts and establishes connection.

8.After the phone establishes connection with the PC again, follow the steps as per the ROM Update Utility.

9.After the process completes, your phone will restart automatically. Now, check your phone when it restarts.

10.As soon as the phone restarts, it shows the following details:
IPL 3.xx.xxxx
SPL 1.11.0000
GSM 03.xx.xx, here x may be any number.

11.Now, if the phone shows SPL 1.11.0000 than your phone is ready to be flashed.

12.But, if it shows SPL as 3.xx.xxxx, where x may be any number than your SPL is not Unlocked and you need to follow all the above steps in this post again.

13.If your phone shows SPL 1.11.0000 on restart, then please follow the steps in the next post.:)

NOTE: DO NOT MANUALLY RESTART YOUR ARTEMIS OR DISCONNECT IT FROM YOUR PC AFTER THE SPL UNLOCKING PROCESS IS COMPLETED. PLEASE KEEP THE DEVICE CONNECTED TO YOUR PC AND FOLLOW THE STEPS IN THE NEXT POST.:mad:
 
Last edited: