showing as "Unable to open Log File, TINY_CONSOLE_INIT DONEThis is a patched SPL for HTC Artemis devices (HTC P3300 / T-Mobile MDA compact III / O2 XDA Orbit / Dopod P800W / Dopod P800 / Dopod M700 / Orange SPV M650).
This SPL is based on original Artemis 1.11 SPL but includes 3 patches:
- SuperCID / SecLevel=0 (set 32)
- Does not check Model ID
- Does not check signature*
(*) code must be formally signed i.e. contain properly-formated signatures on their places, however no checking are performed against them.
This means you can flash ANY ROM to your Artemis after flashing USPL on it, no need to pay for CID unlock anymore!
Disclaimer:
This is free to use but at your own risk, I take no responsibility for any conflict, fault, or damage caused to your phone by this unlocking procedure. No warranties of any kind are given. Any commercial usage prohibited.
Instructions:
1. Unzip
2. Connect your phone to computer, make sure activesync is enabled (green icon)
3. Run start_uspl.exe on your computer and wait until process finishes
4. See Artemis_USPL_Manual.zip (PDF) for more detailed instructions!
Thanks to:
- arc, fdp24, itsme, machinagod, Des, Olipro, and all others who I forget!
- everyone else in xda-developers.com
Hello, I am using htc p3300. my touch pad is working properly. If i press 1 button that it shows 2.I am unable to upgrade my rom. During update my rom i am gettting an error message that image file has corrupted. kindly update it. Please tell Me what to do.
I have solved it for myself and thought about sharing on HOW!
I have DISABLED EVERYTHING in the TODAY screen, so there is NOTHING running on my Artemis.
I copied Cert_SPCS.cab and EnableRapi.cab to my card and ran those.
Then I softreset device and ran the provide USPL tool, after that I can do anything.
Thanks Dear i was very anxiously waiting for itThanks Dear i was very anxiously waiting for it
Please Please please device an idea for athena tooo
This is a patched SPL for HTC Artemis devices (HTC P3300 / T-Mobile MDA compact III / O2 XDA Orbit / Dopod P800W / Dopod P800 / Dopod M700 / Orange SPV M650).
This SPL is based on original Artemis 1.11 SPL but includes 3 patches:
- SuperCID / SecLevel=0 (set 32)
- Does not check Model ID
- Does not check signature*
(*) code must be formally signed i.e. contain properly-formated signatures on their places, however no checking are performed against them.
This means you can flash ANY ROM to your Artemis after flashing USPL on it, no need to pay for CID unlock anymore!
Disclaimer:
This is free to use but at your own risk, I take no responsibility for any conflict, fault, or damage caused to your phone by this unlocking procedure. No warranties of any kind are given. Any commercial usage prohibited.
Instructions:
1. Unzip
2. Connect your phone to computer, make sure activesync is enabled (green icon)
3. Run start_uspl.exe on your computer and wait until process finishes
4. See Artemis_USPL_Manual.zip (PDF) for more detailed instructions!
Thanks to:
- arc, fdp24, itsme, machinagod, Des, Olipro, and all others who I forget!
- everyone else in xda-developers.com