Asus Memo Pad HD7 - Threads? Root? Roms?

Search This thread

HoR77

Member
Jun 30, 2010
30
4
Frankfurt
Hi there,
just ordered my Asus Memo Pad HD7 and I didnt find a single Thread about it, am I just blind or are there none?

I am looking for Custom Roms etc, guess it's just a little early for that, but maybe just rooting works?

Is there a Thread or sub forum for the Memo Pad HD7 ?
 
  • Like
Reactions: nightmoonlight

kristakos

Senior Member
Dec 17, 2013
186
83
Sofia
Hello guys, i have an bricked memo pad h7, it was on an bootloop so i've tried flashing it, that's whats caused the brick.
So now i'm trying to flash it again to stock but my computer doesn't recognize it anymore and flashtool does nothing when i plug it in, i just get the ''windows doesn't recognize usb device'' message, i installed the VCOMM Drivers of course.
Any idea?
Try with different USB port on your pc.Then force install drivers->right mouse click->update drivers->manually
Before everything find some usb drivers uninstall program to clean the mess.
 

kristakos

Senior Member
Dec 17, 2013
186
83
Sofia
Already did with Usbdeview, Flashtools detects it too but still can flash anything do i need to install everything from 0?
If everything is detectable and drivers installed, you are failing somewhere in flashtool, because you must properly format the Memo flash and then install the new ROM(stock).Take a look in superdragonpt thread for our tablet for instructions.This link is kinda useful.
 

MemoDude

New member
Jan 13, 2016
3
0
If everything is detectable and drivers installed, you are failing somewhere in flashtool, because you must properly format the Memo flash and then install the new ROM(stock).Take a look in superdragonpt thread for our tablet for instructions.This link is kinda useful.
Iv'e tried but when i try to install the CWM recovery i get BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3149)
Any idea now?

---------- Post added at 07:23 PM ---------- Previous post was at 06:52 PM ----------

Ok, now i'm not getting that error but im getting this while trying to install the CWM recovery: brom error s_dl_pmt_err_no_space (5069)
 

Pranshu76

Member
Jan 19, 2016
5
0
Hi i need help with my Asus Zenfone 6.I erased my build.prop and i got stuck on a bootloop.I decided to use adb but i did some mistakes in the command promp and now my bootloader is erased.It just shows that there are no commands.
 

wiziin

New member
May 7, 2016
1
0
i am facing the same problem with my asus tablet please help me i hard reset my tablet and it still desame
.. after hardresetting my tablet is saying unfortunately miniappdocking is stopped.
 
Last edited:
Sep 26, 2015
6
0
Hi guys, maybe someone here could help.

i use the latest rom from superdragonpt, and my internal memory is full, because of too much games. i installed them on sd, but the android is on internal memory, like you know.

i tried directorybind in different variations but it wont work. its a know issue for asus and this andoridversion i read.

then i installed exposed framework and the xinternalsd module. this is working, all moved apps running fine, till i do a normal restart and the moved apps wont load anymore.

i figured out, if i open exposed framwork and use the "software restart" button, its asking for supersu permission, restarts and the apps are working again.

if i go to exposed framework and use hardware restart it wont work anymore till the next software restart. is that normal thats its always asking for su permission? would it maybe work if supersu get permanent permission, if there is any option?

could somebody help with that or had a better way for this tablet to move apps completly to sd card?

edit: ok, so i had to move the framework and modules from sd to internal, reassign the apps and it is working.

great!
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 33
    CUSTOM Rom - Beta Stage

    Guys Good News !

    The very first Custom Recovery (CWM Based), is Now fully functional.

    But...... wait.... there's More


    Since i got some time today... i Just finish the very first Costum Rom for our TAB :angel:

    CWM Flashable, of course.

    So i will need some testers, since my time is VERY Limited.
    So PM an message if you have the time to test, and i will reply you back with all instructions and Download links.
    I would like to have at least 2 testers.


    Best Regards
    24
    Custom Rom / Recovery RELEASE

    I have (FINNALY) made the Thread.

    You can now enjoy the FULL Android experience.

    Custom ROM and Custom Recovery are now Released.


    Official Thread here :

    http://forum.xda-developers.com/showthread.php?p=46928324#post46928324

    (I will finish the OP Tomorow), Still need to add The "Usefull Tips" Section, but i need to sleep, gona work in +- 5 hours ...


    Cya:victory:
    21
    RECOVERY ---> DONE !!! :victory:

    Just need to test all the functions now, but its looking good so far :)

    Big Thanks to shoxxy for some hints, and specialy for our Russian Friends for the Files

    Edit:

    Recovery is upside down (thats normal in this resolutions), still throwing some errors, but those are not the hardest... Now all i need is time ;)
    t40ZUAI.jpg
    20
    [Howto] Unbrick memopad HD7

    HowTo "Unbrick Asus Memo Pad HD7"

    Note: The Files and the Knowledge in this tut, are from 4pda.ru , and not from me

    Original Thread 4pda: Thread

    Many Thanks to: Enriki from 4pda.ru

    Note:​

    Use The Flashtool only its Show"n in this HowTo, otherwise you risk to Brick your Device

    What we need:

    Driver : SP Drivers 1.5
    Flashtool: ULK173_20130618_2123_CSC
    Firmware: ME173X_WW_user_4.2.4.06716_20130918


    Step 1 : Install The Driver See this Thread

    By: kumar abhishek

    ************************************************************************************************************************************************************

    Step 2: Unbrick
    Unrar The Flashtool and open the Flash_tool.exe. (1) Klick on Scatter_Loading and choose the "MT6589_Android_scatter_emmc" from the "signed_bin" thats inside the Firmware Folder.
    (2) At Flashtool klick Window and choose Write Memory
    oposuutlzpde.png

    Next, klick Write Memory, Open Raw and choose the "sro-default-lock-sign.img" file from the "signed_bin" Folder. Memory Settings must be "EMMC"

    Before Flashing: Everytime when you klick Button to Flash , the Memopad must OFF and DISCONNECT from the PC. After you klick the write memory Button Connect the Pad to your Pc .Nothing more !!! You dont have to push any Button on the Pad!!!
    The Flash Progress should beginn, when it succesfully Finished A Green Ring is shown.
    yueo5klvuwef.png


    89e788xtyjfu.png


    4gy6ubintit2.png
    Disconnect The Pad from PC​

    Next:
    Klick: Special Format #1 Settings see in the Picture, and Start the Flash Progress shown above !

    ve4m8tts172.png
    Disconnect The Pad from PC​

    Next:
    Klick: Special Format #2 Settings see in the Picture, and Start the Flash Progress shown above !
    nq5bhah5opp.png
    Disconnect The Pad from PC​

    Now The Pad is Unbricked !!! Last Step Install Firmware:

    Go to the Flashtool main Screen klick "Scatter_loading" this Time choose the " MT6589_Android_scatter_emmc " from the " ImageME173X " Folder. Its in the Firmware Folder. (See next Picture)

    oposuutlzpde.png

    Start Flashing with the Download Button, Connect Pad to Pc , When The Green Ring is Shown:

    Your MemoPad is Rescued

    ps: Sorry for my Bad English, i hope i can somebody help to Unbrick his memopad !!!!!

    Greetz Shoxx​

    This HowTo is Fast made, because i had No Time at moment !!The Pics would be Changed tommoroe!!!
    16
    you could wait an couple days, as I'm planing to release my ROM during this week, the beta ROM bugs are now fixed. I'm now optimizing the build to be faster and adding some custom scripts

    B . Regards
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone