Is there a HSPL for the AT&T Titan yet? Goldcard didn't work
Trying to flash stock rom worked, but didn't downgrade SPL
So, I diffinetly need HSPL for a branded AT&T Titan. Thanks
Thanks for the info. I guess I will have to wait til developers come up with something for AT&T Titan. I wised the instructions included info for SPL/HSPL on AT&T Titan, Oh well.If you tried the SPL / HSPL on your AT&T Titan first (before debranding) then you are stuck without a fix (as of yet).
I was in the same boat and my Titan had a memory issue and caller's sound quality was horrible, so I got a warranty exchange from AT&T. When my new one arrived, I de-branded it first with the EUR ROM, then flashed SPL / HSPL and now I absolutely LOVE my Titan (prior, I HATED it). Now (after 6 replacements & no AT&T locks) I have a custom ROM and everything is unlocked and no caller sound quality / memory problems.
Hello, if you actually checked the bottom of the guide I've written for this, it provides instructions on how to apply HSPL for your Titan, assuming you did all the correct steps on debranding it firstThanks for the info. I guess I will have to wait til developers come up with something for AT&T Titan. I wised the instructions included info for SPL/HSPL on AT&T Titan, Oh well.
V. HSPL
i. Once confirming you have 2.5.xxxx.xx on your SPL screen, you will now proceed to the final part: enabling HSPL. What you will need to do is navigate once more into "DFT_HSPL_WP7SG1" (the .rar file you downloaded from DFT), and go here: >DFT_HSPL_WP7SG1>2_HSPL>DFT_HSPL_WP7SG1_INSTALL.ex e. Open the executable and properly read the instructions.
ii. Enter SPL once more on your phone and plug it into your computer, making sure that it says "usb" in black letters towards the bottom portion of the screen.
iii. Click next on the program and read careful about what requirements you will need on the computer. Typically, it should all be there, but it never hurts to make sure.
iv. Take a deep breath and click next. It will attempt to connect to the phone. If it succeeds, continue reading the instructions the program will display. If it does not work, recheck your wire connection and that you have spl 2.5.xxxx.xx on your device, and that it is in SPL mode.
v. Make sure you select the rom version that you have (it should be the only selection there, but just make sure it is before continuing). Select next once you've made your selection.
vi. It will install HSPL. Once completed, the phone may reboot itself back into SPL mode. If it has succeeded, underneath where it shows your rom version, it will either have "DFT" or "CotullaH" written there. Mine says "CotullaH".
I know exactly where he is stuck because he is using USA AT&T Titan. The HSPL instructions doesn't warn USA AT&T Titans owners of the issue (AND IT SHOULD). So, if you following the procedure that every custom ROM points to exactly (like I did and a lot of other people did) you will be stuck on 2.5 SPL with no way out.Hello, if you actually checked the bottom of the guide I've written for this, it provides instructions on how to apply HSPL for your Titan, assuming you did all the correct steps on debranding it first![]()
by getting my AT&T Titian stuck at SPL 2.5There are a few warnings on the developer forum that AT&T branded phones must first be debranded before the phone can flashed with other roms
Not totally. You can still update the OS thru cab loader method to Tango and I assume soon after the 7.8 is released you'll be able to do the same. The only thing is you are stuck with crappy stock AT&T ROM. I say crappy because I absolutely hated my phone until I got custom ROM on it. Can you do a warranty exchange with AT&T?by getting my AT&T Titian stuck at SPL 2.5
does this mean my phone is locked from any future customization?
that would really suck
I'm not sure if I have a warranty... I don't think I purchased it. Trying to understand, there's no fix to my situation as of right NOW... But somehow, can developers come up with a fix you think? Or, no matter what, I'm stuck with the stocked ATT Rom?Not totally. You can still update the OS thru cab loader method to Tango and I assume soon after the 7.8 is released you'll be able to do the same. The only thing is you are stuck with crappy stock AT&T ROM. I say crappy because I absolutely hated my phone until I got custom ROM on it. Can you do a warranty exchange with AT&T?
Cotulla is working on it (I do believe). I stopped reading the thread (http://forum.xda-developers.com/showthread.php?t=1684912) when I got my new device in and de-branded it first (there by preventing the situation that you are in), however, where I left off in my following that thread was Cotulla asking for USA AT&T testers. I have followed the email notifications that I get from that thread, and nothing new that I've seen. On pages 25 - 28 you'll find that Cotulla is (or was) working on it.I'm not sure if I have a warranty... I don't think I purchased it. Trying to understand, there's no fix to my situation as of right NOW... But somehow, can developers come up with a fix you think? Or, no matter what, I'm stuck with the stocked ATT Rom?
Hi, I'm currently on a debranded ATT Titan HSPLed with custom rom. Previously I managed to downgrade my SPL from euro v4 back to stock Cingular rom v1.10 These are the steps I took to downgrade:I'm not sure if I have a warranty... I don't think I purchased it. Trying to understand, there's no fix to my situation as of right NOW... But somehow, can developers come up with a fix you think? Or, no matter what, I'm stuck with the stocked ATT Rom?

this dont work to go back to 1.1 spl to start overHi, I'm currently on a debranded ATT Titan HSPLed with custom rom. Previously I managed to downgrade my SPL from euro v4 back to stock Cingular rom v1.10 These are the steps I took to downgrade:
1. Flashed stock Cingular rom 1.10 using RUU. This brings my Titan from euro Tango rom to stock cingular rom. However the SPL version was stucked at v4
2. Out of desperation, I flashed the stock TEST Cingular rom 2.01 from this thread: http://forum.xda-developers.com/showthread.php?t=1477189 again using RUU.
3. Please note that cingular rom 2.01 is a demo/test rom so its not functional.
4. RE-flashed stock Cingular rom 1.10. This time around it downgraded my SPL from v4 to the stock v1.10
Give this a try, and report back. If it works please before trying again to flash HSPL, debrand your titan to euro rom 2.05 using goldcard method
Goodluck.
Exactly what I've been saying. The only out right now, is to send it back to AT&T and trade for another one.this dont work to go back to 1.1 spl to start over
we need cotulla to work it out
Hello there,Exactly what I've been saying. The only out right now, is to send it back to AT&T and trade for another one.
At this point, I'm deperate. Thanks for the advice, I will be sure try this method and hope for the best. I'll try to keep everyone updated with my results in this thread. Thanks again :good:Hello there,
I had the same situation on my AT&T Titan for 2 weeks, thinking it was my Gold Card or SD, but I finally upgrade the HTC SPL to the official 2.6 from June update.
Then I reflash the Stock AT&T Rom, but the SPL remain at 2.6.
Then I quit for a while. Removed the battery for a couple of days, & tried the Debranding again using the IMG_Eternity_HTC_Europe_2.05.401.01_Radio_Signed_16.23.06.10_16.32.00.23_ETERNITY_RELEASE.nbh, renaming it to ETERIMG.nbh & Goldcard my phone onto this EU Rom.
Then the SPL was downgraded from 2.6 to the EU 2.5.
After that I proceeded to the DTF SPL2.5 & HSPL & voila, the custom Roms.
Hope it help.
My outline comes from the guide I made specifically for AT&T phones that need to do in order to safely debrand and install hspl.I know exactly where he is stuck because he is using USA AT&T Titan. The HSPL instructions doesn't warn USA AT&T Titans owners of the issue (AND IT SHOULD). So, if you following the procedure that every custom ROM points to exactly (like I did and a lot of other people did) you will be stuck on 2.5 SPL with no way out.
I haven't seen a warning to USA AT&T Titans anywhere that should say to de-brand your Titan first before attempting the HSPL or you'll be stuck.
Your outline will not help this person where he is stuck. Cotulla is working on it (I do believe).
If this actually works, we need to spread the news about. There are still a bunch of AT&T Titans locked out there on SPL 2.5. franchize1989, OP, give us an update if it worked or not. Good luckHello there,
I had the same situation on my AT&T Titan for 2 weeks, thinking it was my Gold Card or SD, but I finally upgrade the HTC SPL to the official 2.6 from June update.
Then I reflash the Stock AT&T Rom, but the SPL remain at 2.6.
Then I quit for a while. Removed the battery for a couple of days, & tried the Debranding again using the IMG_Eternity_HTC_Europe_2.05.401.01_Radio_Signed_16.23.06.10_16.32.00.23_ETERNITY_RELEASE.nbh, renaming it to ETERIMG.nbh & Goldcard my phone onto this EU Rom.
Then the SPL was downgraded from 2.6 to the EU 2.5.
After that I proceeded to the DTF SPL2.5 & HSPL & voila, the custom Roms.
Hope it help.