In DNI3 imposed a bunch of restrictions on CSC, so custom bikes at the moment do not roll in determining the reg ini xml files and provxml new CSCMgrSvc.dll toggles UsePDACSC and loading is done with the internal CSC in Windows.
ATIV S - Officia WP 8.1 GDR1 update + firmware
- Thread starter Mattemoller90
- Start date
Custom thrown in on the official update
Last edited:
And it works?Custom thrown in on the official update
Yes works, unlock and the the rest of the work.
The problem is CSCMgrSvc.dll, according to the previous post spavlin
The problem is CSCMgrSvc.dll, according to the previous post spavlin
Changing region without hard reset/flash
On my device the old region value is retained in Diagnosis although SamWP8 says it's 000-AT. So I'm wondering what's wrong - ATO is in the CSC list when I check with diagnosis, but the old region is checked. Restarting the device doesn't help.
This is also a DP device with firmware from GDR2.
BTW: DP devices should get the new firmware as well - if region is ATO.
Shouldn't Diagnosis show "(o) ATO" after setting region to "000-AT" in SamWP8?
On my device the old region value is retained in Diagnosis although SamWP8 says it's 000-AT. So I'm wondering what's wrong - ATO is in the CSC list when I check with diagnosis, but the old region is checked. Restarting the device doesn't help.
This is also a DP device with firmware from GDR2.
BTW: DP devices should get the new firmware as well - if region is ATO.
1) No. CSC code remains the same.
2) SamWP8 defaults to 000-AT if your current region isn't in the list.
Set 000-AT in SamWP8. DO IT. And then check for updates.
Thanks for your fast reply!
1) OK, that's surprising for me. That means there is more than one place where CSC is set.
2) Did that (again): Chose "000-AT" and tapped "SET". Closed and restarted SamWP8: Still "000-AT". Checked for updates: No updates.
Changed DeviceManufacturer back to SAMSUNG via Registry, restarted and made sure that it worked in Store. Checked for updates: No updates.
Disabled Developer Preview (in SAMWP8, region still is "000-AT"). Checked for updates: No updates.
Anything else I could do? (I'd like to get the fixed firmware without resetting my phone and without losing interop unlock.) Do I need to change the Region in Settings as well?
1) OK, that's surprising for me. That means there is more than one place where CSC is set.
2) Did that (again): Chose "000-AT" and tapped "SET". Closed and restarted SamWP8: Still "000-AT". Checked for updates: No updates.
Changed DeviceManufacturer back to SAMSUNG via Registry, restarted and made sure that it worked in Store. Checked for updates: No updates.
Disabled Developer Preview (in SAMWP8, region still is "000-AT"). Checked for updates: No updates.
Anything else I could do? (I'd like to get the fixed firmware without resetting my phone and without losing interop unlock.) Do I need to change the Region in Settings as well?
If I understand:
- If we are under DNI3, the downgradage on the less version (GDR2, GDR3) work or not?
- The Custom CSC not working on DNI3?
- If we are in the less version than DNI3 (CMK2 e.g) and that we flash a Custom CSC, then update to the new firmware DNI3, the Custom CSC is "broken" (this goes to the previous question)?
- If we are under DNI3, the downgradage on the less version (GDR2, GDR3) work or not?
- The Custom CSC not working on DNI3?
- If we are in the less version than DNI3 (CMK2 e.g) and that we flash a Custom CSC, then update to the new firmware DNI3, the Custom CSC is "broken" (this goes to the previous question)?
1) yes
2) yes custom csc is't working if you flash it to the phone when you are on DNI3
3)yes and no ? the unlock and cap unlock works , but for me full file sys excess got broken ( only half excess )
Last edited:
Yes I did.
Do I need to remove the "Non-Production Errors.txt" file again?
Hi every one,
I am originally on an Interop Unlock Ativ S for a while and on DP.
With SamWP8 Tools, I changed the key from 000-FR to 000-AT to apply the two last updates this week-end (8.10.14176.243 and8.10.14192.280).
But now, I cannot go back to 000-FR key.
If I check the SamWP8 Tools' Unlock section, "Unlock" and "Interop Unlock" are unchecked, "Prevent relock" is checked.
If I try to modify the "Unlock", the "Interop unlock" or "000-FR", close and go back to SamWP8 Tools, no modification is valable, I have stil "Unlock", the "Interop unlock" unchecked and the region set to "000-AT"...
If I try to read and modify the "PhoneMobileOperatorName" key from the SamWP8 Tools' registry editor [HKEY_LOCAL_MACHINE\System\Platform\DeviceTargetingInfo]
, nothing happened...
Is it possible that I lost the InterOp Unlock?
Do somebody has an idea to help me?
Regards
I am originally on an Interop Unlock Ativ S for a while and on DP.
With SamWP8 Tools, I changed the key from 000-FR to 000-AT to apply the two last updates this week-end (8.10.14176.243 and8.10.14192.280).
But now, I cannot go back to 000-FR key.
If I check the SamWP8 Tools' Unlock section, "Unlock" and "Interop Unlock" are unchecked, "Prevent relock" is checked.
If I try to modify the "Unlock", the "Interop unlock" or "000-FR", close and go back to SamWP8 Tools, no modification is valable, I have stil "Unlock", the "Interop unlock" unchecked and the region set to "000-AT"...
If I try to read and modify the "PhoneMobileOperatorName" key from the SamWP8 Tools' registry editor [HKEY_LOCAL_MACHINE\System\Platform\DeviceTargetingInfo]
, nothing happened...
Is it possible that I lost the InterOp Unlock?
Do somebody has an idea to help me?
Regards
You must unlock the RPC! be quiet happened to me too and I solved this way:
create this file: Non-Production Errors.txt (empty) in this location: Phone\data\Users\Public\Documents
Thanks bro, everything is running now :fingers-crossed::good:
