Atrix 4G Leaked ICS with Kernel 3.1.10

[andresrivas]

Ok now I'm trying the latest kernel on since the last message.
It is a lot better than the alpha kernel.
There's still bugs though.
Battery drain. + Battery not charging up to full (stops at 90%).

Install ravilov's Atrix Battery fix. Refer to it's thread for instructions.

Ram is 724mb as opposed to ~816 on GB.

It is meant to be that way. I've tried getting ~800Mb with ramfix and phone was lagging more. Somehow this rom needs the extra ram dedicated to video.

The confusing thing is that although the rom is not rooted some apps seem to be able to gain root access.

This rom IS rooted, in fact, you should see the superuser app installed.

A few improvements here and there and it will be the perfect rom.
Overclocking would be great.

Na, Overclocking only speeds up your device's death. is only my opinion, though

 

[zotrules]

That's what I think too, the missing ram should be in use by either video or simply the system.
The superuser app is not there. I've installed it several times even with a wiped phone. (Everything formattable formated)
I have installed it myself though and all I got was a zombie app which made no difference. In short, some apps get root and some just don't. That is from my experience. But I have noticed from reading on this thread and based on the fact of several fresh installs that results may differ; sometimes a lot(performance wise). Weird. Once I got to see the system disintegrate on its own just by trying out the lapdock.
Thanks for the clue on the battery. Will find it and try it out ASAP.
Install fails. Cannot gain su access. Now rooted and granted access to battery fix. Strangely no difference. Still at 90%.

 

[andresrivas]

Yup, the ram situation is just like the pcs with onboard video.

Is very weird, i've tried atrics since its release, and it was rooted. Now im triying cm10.1 but i always return to atrics.

Battery fix also need root, without it is useless. Once the fix is applied, choose restart the battd daemon and should display some nonsense, like its on 150% or so. Once you unplug the charger it go back to 99 or 100%.

Keep in mind that this rom shows battery in 10% steps.

Enviado desde mi MB860 usando Tapatalk 2

 

[irbaaz]

Bricked my phone help me STUCKED in bootloop!!!

I bought my phone yesterday it was an unlocked phone imported from korea
i have recently unlocked the bootloader of the phone by flashing a file through rsd lite than after that flashing ramfix.....

Story starts now

according to the given lists i have downloaded all the essentials for the phone

1. installed leaked rom
2. installed kernel as suggested ( without rebooting)
3. home and touch fix
4. ram fix

All I did is in one sesion without rebooting the phone , continuously flashig all the 4 files one after one , after that i have rebooted the phone which shows motorola icon than at&t after which phone reboots


Phone keeps reboting al the time what is the fix ( i have tried reinstalling the rom even )

---------- Post added at 09:44 PM ---------- Previous post was at 09:21 PM ----------

Is anyone can give me link for stock kernelfor international model??

 

[andresrivas]

I bought my phone yesterday it was an unlocked phone imported from korea
i have recently unlocked the bootloader of the phone by flashing a file through rsd lite than after that flashing ramfix.....

Story starts now

according to the given lists i have downloaded all the essentials for the phone

1. installed leaked rom
2. installed kernel as suggested ( without rebooting)
3. home and touch fix
4. ram fix

All I did is in one sesion without rebooting the phone , continuously flashig all the 4 files one after one , after that i have rebooted the phone which shows motorola icon than at&t after which phone reboots


Phone keeps reboting al the time what is the fix ( i have tried reinstalling the rom even )

---------- Post added at 09:44 PM ---------- Previous post was at 09:21 PM ----------

Is anyone can give me link for stock kernelfor international model??

Format /data /preinstall /system /cache and dalvik.
The install atrics (not leaked rom, that has way too many issues and won't boot on non-att phones). Flash webtop (a.k.a. vendor) and reboot. Reboot into recovery, clear cache/dalvik and then install the kernel. Reboot.

That's how it works for me.

I don't recommend installing ramfix, this rom needs more video ram than others.

Home fix only install if you need it.

Enviado desde mi MB860 usando Tapatalk 2

 

[irbaaz]

Format /data /preinstall /system /cache and dalvik.
The install atrics (not leaked rom, that has way too many issues and won't boot on non-att phones). Flash webtop (a.k.a. vendor) and reboot. Reboot into recovery, clear cache/dalvik and then install the kernel. Reboot.

That's how it works for me.

I don't recommend installing ramfix, this rom needs more video ram than others.

Home fix only install if you need it.

Enviado desde mi MB860 usando Tapatalk 2

What is vendor and why it is needed to be installed alongwith atrics

---------- Post added at 04:58 AM ---------- Previous post was at 04:36 AM ----------

Format /data /preinstall /system /cache and dalvik.
The install atrics (not leaked rom, that has way too many issues and won't boot on non-att phones). Flash webtop (a.k.a. vendor) and reboot. Reboot into recovery, clear cache/dalvik and then install the kernel. Reboot.

That's how it works for me.

I don't recommend installing ramfix, this rom needs more video ram than others.

Home fix only install if you need it.

Enviado desde mi MB860 usando Tapatalk 2

I wasn't rooted at the time of flashing this rom , is this matters.

 

[irbaaz]

Loose BASEBAND and IMEI !!

I have lost baseband and imei of my phone in all this process, i have flashed smartlight rom and gain boot after that but no network now....



Any suggestion please?

 

[andresrivas]

I have lost baseband and imei of my phone in all this process, i have flashed smartlight rom and gain boot after that but no network now....



Any suggestion please?

Your pds partition has been corrupted/deleted I think cwm makes a backup, althrough i'm not sure. Someobe better experienced has to help you.

Enviado desde mi MB860 usando Tapatalk 2

 

[irbaaz]

Your pds partition has been corrupted/deleted I think cwm makes a backup, althrough i'm not sure. Someobe better experienced has to help you.

Enviado desde mi MB860 usando Tapatalk 2

All fixed now i have installed other baseband and voila network and imei is back

Usin atrics latest build now very unstable for my device anyway device is again usable....

 

[palmbeach05]

Good news!
CM11 is running in our Atrix!!

CM11 is not the ICS leak running 3.1.10 kernel...

Sent from my MB886 CM10.2/4.3.1

 

[andresrivas]

Good news!
CM11 is running in our Atrix!!

Reported for spamming the forum.....
If you want the 10 posts, at least make them worth or relevant


Enviado desde mi MB860 usando Tapatalk 2

 

[wadi5636]

I am glad the download links can still be googled. Just rejuvenated an unused Atrix (my very first android) and feeling nostalgic about it right now.
The good ol Atrix is back in business!

Thank you Dev and others whom had worked hard on the leak!

 

[jndias]

download is not available

download is not available

Android 4.0.4 ICS is working great on my Atrix 4G.
I flashed the official AT&T ICS for Atrix and then flashed the last Kernel build by Krystianp (2013-12-22 build)
There are two versions of kernel, I've used the version with stock voltages - link.

The things I did:
or removed
1 - Flash ICS_Atrix_leak_flashable
2 - Flash kernel (kernel-2013_12_22_atrics)
3 - Flash Multitouch-Homefix
4 - Flash Ramfix
5 - Install SETCPU

*Flash using CWM (wipe cache, data, dalvik, system)

5 - After boot, you need to get root access, use this

6 - You can remove FastDormency.apk from system/app, it give me best battery life.
7- WI-FI theter works, but you need to disable the entitlement check with Sqlite Editor in the systems->settings.db and set it to 0 from 1 and reboot.

I put the files here >> DOWNLOAD
In this zip you'll find all needed files! (ROM, Radio 37P, Ramfix, Kernel, Multitouch-Homefix, files to root(step 5)...)

For me everything works, camera, flash, fingerprint... It's really smooth!

I'm not the dev of this ROM, I'm just saying what I did.
Thanks for Devs Krystianp, Epinter, upndwn4par and others.

 

[vicfuze]

Try this,
https://drive.google.com/file/d/1qvmvddGTq8UwS4B7kgt2wGOwwqb3YcOR/view?usp=sharing