Automatic bootloader UNLOCK/ROOT for AT&T 1.26/1.57/1.83/4.5.91 [UPDATE 07/31/11]

[mramirezusa]

UPDATED/CLEAN SCRIPT V4.2 07/31/11 8:00PM EST

PLEASE DO NOT CHANGE ANY FILE PERMISION OR COMPATIBILITY JUST RUN THE SCRIPT

* I consolidate everything in a single menu, so now Automatic Bootloader Unlock, Automatic Root for Unlock users, Automatic CWM for Unlock users, Mobile Hotspot for Unlock users, Automatic Fix for Softbrick (NO OS SCREEN/some "Failed to boot 0x1000"), fastboot/moto-fastboot checking for troubleshot & Official GB 2.3.4/4.5.91 Restore from Motorola

* Default CWM now: Tenfar's recovery-en-goapk-0630-1029

* Optional CWM Rom Manager's recovery-clockwork-4.0.1.4-olympus

* New executable file "MAIN"

* Now with menu selection to chose what version come from to apply the correct pudding

* Added compatibility layer for Windows 7 x64 users as follow: "set __COMPAT_LAYER=WINXPSP2" <----- I JUST REMOVED

Check screenshots of each step side by side (PC <-> Phone Screen)

AFTER GET THE BOOTLOADER UNLOCK YOU CAN ONLY FLASH BY RSD SBF'S WITH "PUDDING" FOR NOW ON, SO IN OTHER WORDS BE CAREFULLY WHEN YOU USE RSD AFTER "UNLOCKED" BOOTLOADER

* CONFIRMED, IS SAFE TO RSD THIS SPECIFIC SBF FROM MOTOROLA:
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
MD5: 56721d893e43b814e95683a00b165555
SHA1: e00786e975b4f1d9fba2ff90c1ee6bbf95bb47b2

SO NOW ON FOR UNLOCKED BOOTLOADER USERS THIS CAN BE A BASE IF SOMETHING GO WRONG AND YOU NEED OUT OF THE BOX STATE FROM MOTOROLA
Need to be flash with RSDlite V5.3.1

Prerequisite:
1. ATT ATRIX 4G device
2. Windows PC
4. No matter what version you have 1.26 / 1.57 / 1.83 / 4.5.91 (*)
5. Proper USB drivers Installed (You can found them at: http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers)
6. A little of Patience

PROS:
* You will ended with an unlock bootloader (BL)

Procedure:
1. Download the attached file
2. Unzip the file inside of a new folder on your hard disk
3. Now is time to run the magic, go to the folder you just unzip the files in and double click or run "MAIN" file
4. A new windows DOS box will show up and just follow the procedure!
5. Flashing pudding part will take a little longer so be patience and let the magic do their work
6. At the end of the process your phone will reboot automatic.
7. Enjoy it!

Thanks to the2dCour for pudding sbf
Thanks to Tenfar for CWM (I prefer it due to the ABD option in recovery! NICE)
Thanks t0dbld for Mobile Hotspot patch

(*) Some users with 4.5.91 will need to run "fix" file to recover from a softbrick after the first attempt
(*) It seemd the new 2.3.4/4.5.91 pudding do a wipe after flash it, so have a backup just in case (I tested 1.83 and at least this preserve the data)

Download file here V4.2:
http://www.megaupload.com/?d=NXU82L12

 

[phobos512]

Is "carpet" another one if these new fangled terms for the inner workings of the Atrix, or just a typo? Because if it's not a typo then you have broken the rule of not using a cooking reference. I propose "jello".

Oh, and does this kill the data partition like regular pudding?

Sent from my MB860 using XDA App

 

[jruweaver]

This will help a lot of people not familiar with fastboot. Good job!

Sent from my MB860 using XDA Premium App

 

[mramirezusa]

updated carpet to folder... And this DO NOT KILL DATA PARTITION!

Is "carpet" another one if these new fangled terms for the inner workings of the Atrix, or just a typo? Because if it's not a typo then you have broken the rule of not using a cooking reference. I propose "jello".

Oh, and does this kill the data partition like regular pudding?

Sent from my MB860 using XDA App

 

[mramirezusa]

Your Welcome!

This will help a lot of people not familiar with fastboot. Good job!

Sent from my MB860 using XDA Premium App

 

[crs353]

im a noob to the atrix and all this bootloader stuff lol. when i go to run the “unlock” file what should my phone be at should it be at home screen off or fastboot? srry for the noobie question.

 

[LivingChampion]

Nice, will this work over Gingerblur? Or should I back off to restored 1.8.3 stock first? Thanks seems like people will never give me an answer . I'd hate to have to reinstall everything backed up again.

After installing this, do I go with the official update on the phone route or use RSD-lite?

 

[jzaslice]

im a noob to the atrix and all this bootloader stuff lol. when i go to run the “unlock” file what should my phone be at should it be at home screen off or fastboot? srry for the noobie question.

did you proceed to read the cmd prompt??
your phone should say "Starting RSD protocol support" before plugging your phone in. enter RSD mode by following instructions given in cmd prompt .


THIS IS AWESOME mramirezusa...thanks!!

 

[xploited]

Has anyone tested this? I want to try it out, but don't want to be the first one which seems to be the case.

 

[mramirezusa]

If you run the file "unlock", it will tell you exactly what to do with your phone for example "turn on and press vol up..."

im a noob to the atrix and all this bootloader stuff lol. when i go to run the “unlock” file what should my phone be at should it be at home screen off or fastboot? srry for the noobie question.

Sent from my MB860 using XDA App

 

[mramirezusa]

Work in Gingerblur, you don't have to restored to 1.83 stock and it did not touch your data partition but always is good to have a backup of your data

As you stated you have gingerblur so some of your /system files are already been changed if you try to do an OTA it will not pass the file checking before it applied the OTA and run RSD route can wipe your data depending on the SBF (full or service)

I recommend you to flash RSD 1.83 "SERVICE" so it did not wipe your data and then run OTA directly from your phone

Nice, will this work over Gingerblur? Or should I back off to restored 1.8.3 stock first? Thanks seems like people will never give me an answer . I'd hate to have to reinstall everything backed up again.

After installing this, do I go with the official update on the phone route or use RSD-lite?

Sent from my MB860 using XDA App

 

[mramirezusa]

You will not be the first one, I did this script for some coworkers overseas, so is already been tested

I tested my self in my unit twice before been release it

Has anyone tested this? I want to try it out, but don't want to be the first one which seems to be the case.

Sent from my MB860 using XDA App

 

[pete769]

A bell version of this would be awesome!

Sent from my MB860

 

[mramirezusa]

I just updated and cleaned the script! file at the first post 07/24/11

 

[elementaldragon]

Is there an easy way to tell if it worked or not? I'm hoping it did, seeing as apparently due to a bit of a softbrick issue at one point, it completely wiped my phone back to stock. I'm assuming it worked, since it seems that the unlock worked now that i have "Unlocked" displayed at the red M screen.

 

[Taas]

UPDATED/CLEAN SCRIPT V2 07/24/11

Prerequisite:
1. ATT ATRIX 4G device
2. Windows PC
4. No matter what version you have 1.26 / 1.57 / 1.83 / 4.5.91 (*)
5. A little of Patience

PROS:
* You will ended with an unlock bootloader (BL)

Procedure:
1. Download the attached file
2. Unzip the file inside of a new folder on your hard disk
3. Now is time to run the magic, go to the folder you just unzip the files in and double click or run “unlock” file
4. A new windows DOS box will show up and just follow the procedure!
5. Flashing pudding part will take a little longer so be patience and let the magic do their work
6. At the end of the process your phone will reboot automatic.
7. Enjoy it!

Thanks to the2dCour for pudding sbf

(*) Some users with 4.5.91 will need to run "fix" file to recover from a softbrick after the first attempt

do u have to use a FRONT USB port, or can i use a back port?

 

[Taas]

I am rooted now, i have to use preinstall to get root back after doing this?...Can u make a bat file for that too....lol

 

[mramirezusa]

Try it if it get recognize it will be fine. But I always recommend front USB port due the drop of the volts

do u have to use a FRONT USB port, or can i use a back port?

Sent from my MB860 using XDA App

 

[mramirezusa]

This do not affect you actual root status, so if you have it right now it will be like that after unlock procedure

I am rooted now, i have to use preinstall to get root back after doing this?...Can u make a bat file for that too....lol

Sent from my MB860 using XDA App

 

[mramirezusa]

If you have the tag "unlocked" at boot left upper corner you have a Unlock Bootloader

Is there an easy way to tell if it worked or not? I'm hoping it did, seeing as apparently due to a bit of a softbrick issue at one point, it completely wiped my phone back to stock. I'm assuming it worked, since it seems that the unlock worked now that i have "Unlocked" displayed at the red M screen.

Sent from my MB860 using XDA App