Anyone knows how to replace that part of RAZR I, the glass one, where is located the camera, flash, etc?
I would try to buy the replacement part but don't know how to change.
I would try to buy the replacement part but don't know how to change.
I'm not sure if I need to buy the whole back part or just the glass one.Hi.
The glass is glued with a dubbled-sided adhessive. It is no problem to remove it. You just have to be carefull around the speaker, not to remove the speakergrill.
I would recommend to use a plastic tool to avoid scratches on the outer housing.
have you replaced your glass already? did you used the double sided tape? if you bought only the glass was it made of thick glass or just a silly plastic? I have a complete back cover replacement and thinking of taking down the glass and have mine replaced with that. But I don't have the double sided tape. will it work with glue (i.e. have the same height with the rest of the back of the phone)?Think of cleaning the lens thoroughly before gluing the glass!
Yes I did; only replaced the broken glass part over lens, flash. In the set I got there was a glass (no plastic), double-sided tape, it was piece of cake replacing - except that I did not clean the lens good enough, got since ugly pics with spots on..![]()
Well, basically I used a sharp knife/cutter. My glass was quite broken, so I took it out piece by piece. You just have to be careful with around the camera and speaker.How did you remove all of the glass off the back and where is the best place to get the glass from?
Thank you