To visit the main guide that includes pictures click here
Introduction:
People Found my guide on How to Root Samsung Galaxy Note 2 very useful and easy to follow. So, I thought to make a guide on how to root Samsung Galaxy Note 3.In this guide we are going to explore two methods of rooting your Samsung Galaxy Note 3.One is going o be using Chainfire’s autoroot, the other will be using the normal method which involve flashing a recovery then rooting by flashing a zip through the new custom recovery.
Disclaimer:
I’m not responsible if something goes wrong on your phone(Usually nothing goes wrong), you’re doing this on your own responsibility. Rooting your phone will void your warranty so don’t root your device unless you know what you are doing. Or Check this post to figure out what is rooting.
The Procedure
Method 1: Using Chainfire’s Autoroot[Recommended] :
Advantages:
1.*This method is one of the fastest methods to gain root access.
2. Flashing Chainfire’s autroot won’t modify your system like flashing a custom recovery will.So, it will stay as sock as possible.
3. Other than that there are tons of other advantages for rooting a device check them out.
Disadvantages:
1. It will void your device’s warranty.
Requirements:
1.Samsung drivers.
*In case the previous driver don’t work download and install Kies.
2. ChainFire’s autoroot according to your model number:
Step1: Connect your Samsung Galaxy Note 3 to the computer using a USB cable.
Step2: Unzip the CF-Autorootxxxxxxx.zip to get a .tar.md5 file and 4 other files.
Step3:Now open the folder were you the files are.Now run Odinv3-3.07.exe as administrator
Step4:Now when the Odin windows appears, click on PDA.
Step5: Another windows is going to appear which will ask you to select a file.Thats when its time to select the .tar.md5 file.
Step6:Now click on Start to initiate the flashing process.
After it finishes you should see Pass in the box above ID:COM like in the picture below
Conclusion:
Rooting a device isn’t that hard once you get the hang of it. As always we will meet next week with another rooting guide.Don’t forget, You can subscribe to our RSS feed or Subscribe by email. To get notified when we have new posts don’t hesitate* to like our Facebook Page, follow us on Twitter and Google+ .
*
Introduction:
People Found my guide on How to Root Samsung Galaxy Note 2 very useful and easy to follow. So, I thought to make a guide on how to root Samsung Galaxy Note 3.In this guide we are going to explore two methods of rooting your Samsung Galaxy Note 3.One is going o be using Chainfire’s autoroot, the other will be using the normal method which involve flashing a recovery then rooting by flashing a zip through the new custom recovery.
Disclaimer:
I’m not responsible if something goes wrong on your phone(Usually nothing goes wrong), you’re doing this on your own responsibility. Rooting your phone will void your warranty so don’t root your device unless you know what you are doing. Or Check this post to figure out what is rooting.
The Procedure
Method 1: Using Chainfire’s Autoroot[Recommended] :
Advantages:
1.*This method is one of the fastest methods to gain root access.
2. Flashing Chainfire’s autroot won’t modify your system like flashing a custom recovery will.So, it will stay as sock as possible.
3. Other than that there are tons of other advantages for rooting a device check them out.
Disadvantages:
1. It will void your device’s warranty.
Requirements:
1.Samsung drivers.
*In case the previous driver don’t work download and install Kies.
2. ChainFire’s autoroot according to your model number:
- SM-N900
- SM-N9002
- SM-N9005
- SM-N9006
- SM-N9007
- SM-N9008
- SM-N9009
- SM-N900P
- SM-N900R4
- SM-N900S
- SM-N900T
- SM-N900W8
- Put your Galaxy Note 3 in download mode.First,Completely shutdown your phone and turn it on again by holding the volume down + home button ,then press the Power button for 5 seconds.Release your fingers when you see the warning screen.Then press the Volume up
Step1: Connect your Samsung Galaxy Note 3 to the computer using a USB cable.
Step2: Unzip the CF-Autorootxxxxxxx.zip to get a .tar.md5 file and 4 other files.
Step3:Now open the folder were you the files are.Now run Odinv3-3.07.exe as administrator
Step4:Now when the Odin windows appears, click on PDA.
Step5: Another windows is going to appear which will ask you to select a file.Thats when its time to select the .tar.md5 file.
Step6:Now click on Start to initiate the flashing process.
After it finishes you should see Pass in the box above ID:COM like in the picture below
Conclusion:
Rooting a device isn’t that hard once you get the hang of it. As always we will meet next week with another rooting guide.Don’t forget, You can subscribe to our RSS feed or Subscribe by email. To get notified when we have new posts don’t hesitate* to like our Facebook Page, follow us on Twitter and Google+ .
*
