Hey sir @adblocker
I am on 6.0.1 cm13
1- I want to use some tweaks should I copy them to last line In build prop cause I didn't found the line in grand prime on cm13
2 I just need tweaks for better signal reception can u tell me all the tweaks about it
Hey sir @adblocker
I am on 6.0.1 cm13
1- I want to use some tweaks should I copy them to last line In build prop cause I didn't found the line in grand prime on cm13
2 I just need tweaks for better signal reception can u tell me all the tweaks about it
Just For Rooted Devices VPN and Security entrance FC bug , fixed
The best build.prop tweak for Grand Prime 5.0.2 & 4.4.4
but Works for any smart phone running 4.3 & 4.4.2 & 4.4.4 & 5.0.1 & 5.0.2 & 5.1.1 & 6.0.1
Tested Devices :
SM-G530H/DV
SM-G530H/DS
SM-G530FZ
SM-G530BT
SM-G530F
SM-G530M
SM-G360
SM-G531 (all variants)
SM-S920L
S7582 S Dous 2
LG G2 (d801)
SM-G5308W
Idol 3
Redmi 3/Pro/S/S Prime /X
Almost all of devices:good:
Waiting for feedbacks ...
Before doing anything plz backup your main build.prop located in root/system/build.prop and save it on the PC
Here is some Enhancements:
- Supreme Battery life (even more in idle)
- Better internet browsing & download speed (NEW2016)
- Smoother experience
- Google DNS
- Better Microphone
- More Ram
- Better signal reception
- Wireless Tweaks
- Smoother video streaming and tweak media
- Faster Boot-Animation FPS (Just compare)
- Better call voice quality
- Game tweaks
- Qualcomm Tweaks
For Grand Prime:
1. Find this line"ro.pip.gated=0" at the end of build.prop as U can see its the last line
2. Copy all of these lines just below the "ro.pip.gated=0"
3. Save the changes and set the permissions to rw-r-r
4. Reboot and enjoy
For other phones :
1. Find last line of build.prop
2. Copy all of these lines just below the last line
3. Save the changes and set the permissions to rw-r-r
4. Reboot and enjoy
# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
#security.mdpp=none
#security.mdpp.result=none
wifi.supplicant_scan_interval=220
# Video Acceleration Enabled And HW debugging
debug.performance.tuning=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
#Minimum brightness of your screen
ro.lcd_min_brightness=1
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
Actually, it's easy to put these codes, just make sure after you enter these, set permissive into 644/rw-r--r, and everyone have their own mods entered to their build.prop , which i'm afraid it'll brick your phone if you just flash it (especially if you have a different baseband)
Actually, it's easy to put these codes, just make sure after you enter these, set permissive into 644/rw-r--r, and everyone have their own mods entered to their build.prop , which i'm afraid it'll brick your phone if you just flash it (especially if you have a different baseband)
Some guide (because i cant create a zip )
Use solid explorer for easy use
Copy all the codes ( from #add to #end )
After that go to here( picture 1 )
Put the code at the bottom of the build.prop (picture 2)
Check the permission at properties and make sure it looks like this (picture 3)
And reboot
This Thread is closed and no longer being updated
I've Started New Project (BT4A)
Check it out LINK [Updated]
Just For Rooted Devices
VPN and Security entrance FC bug , fixed
The best build.prop tweak for Grand Prime 5.0.2 & 4.4.4
but Works for any smart phone running 4.3 & 4.4.2 & 4.4.4 & 5.0.1 & 5.0.2 & 5.1.1 & 6.0.1
Tested Devices :
SM-G530H/DV
SM-G530H/DS
SM-G530FZ
SM-G530BT
SM-G530F
SM-G530M
SM-G360
SM-G531 (all variants)
SM-S920L
S7582 S Dous 2
LG G2 (d801)
SM-G5308W
Idol 3
Redmi 3/Pro/S/S Prime /X
Almost all of devices:good:
Waiting for feedbacks ...
Before doing anything plz backup your main build.prop located in root/system/build.prop and save it on the PC
Here is some Enhancements:
- Supreme Battery life (even more in idle)
- Better internet browsing & download speed (NEW2016)
- Smoother experience
- Google DNS
- Better Microphone
- More Ram
- Better signal reception
- Wireless Tweaks
- Smoother video streaming and tweak media
- Faster Boot-Animation FPS (Just compare)
- Better call voice quality
- Game tweaks
- Qualcomm Tweaks
For Grand Prime:
1. Find this line"ro.pip.gated=0" at the end of build.prop as U can see its the last line
2. Copy all of these lines just below the "ro.pip.gated=0"
3. Save the changes and set the permissions to rw-r-r
4. Reboot and enjoy
For other phones :
1. Find last line of build.prop
2. Copy all of these lines just below the last line
3. Save the changes and set the permissions to rw-r-r
4. Reboot and enjoy
# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
#security.mdpp=none
#security.mdpp.result=none
wifi.supplicant_scan_interval=220
# Video Acceleration Enabled And HW debugging
debug.performance.tuning=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
#Minimum brightness of your screen
ro.lcd_min_brightness=1
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
most of these tweaks are useless after jelly Bean and 90% is useless in KK and lolipop. before using any build prop tweaks search about it. some may increase performance but lower battery some are opposite. just use this few and you are all set: