Best custom ROM for OnePlus Nord 100.

[bentalebnordine]

Hi guys, Lineage has just launched an amazing GSI custom rom, here is a link

https://sourceforge.net/projects/andyyan-gsi/files/latest/download

The installation process is simple just go to

How to install GSI ROM on OnePlus n100.

Good morning guys.

forum.xda-developers.com

This rom is on the latest Android version (12), very stable, battery friendly and very customizable and backed with the latest security patches (February 05 2022)
To enjoy double tape anywhere on the screen to sleep just download those two files

APKs - Google Drive

drive.google.com

install them and set lawnchair as a default launcher, activate device administrator for it , go to launcher settings gestures double tap, that's it.

 

[joegib]

Well, I managed to finally install ... you are correct. Runs completely smooth. Is the partition large enough to install gapps ... and of course, how to install. I would like to use 12.

 

[bentalebnordine]

Unfortunately not, because the ultimate size of the system partition is 2.6gb
If you want to install the Gapps there is another ROM
caos-v224-201029-arm64-bgN.img.xz
You can find it on xda
Notice this ROM ends with bgN.img.xz
If it's g it's full (with gapps)
If it's v it's vanilla (without gapps).
Generally if the xz file exceeds 740mb, then the extracted file will surpass 2.6gb
You can verify this with 7zip the size of the extracted file will be on the right hand of the window of the 7zip program.
I forgot to to tell you that the Gapps will be included on the xz file.

 

[joegib]

Unfortunately not, because the ultimate size of the system partition is 2.6gb
If you want to install the Gapps there is another ROM
caos-v224-201029-arm64-bgN.img.xz
You can find it on xda
Notice this ROM ends with bgN.img.xz
If it's g it's full (with gapps)
If it's v it's vanilla (without gapps).
Generally if the xz file exceeds 740mb, then the extracted file will surpass 2.6gb
You can verify this with 7zip the size of the extracted file will be on the right hand of the window of the 7zip program.
I forgot to to tell you that the Gapps will be included on the xz file.

I will give it a try, but it is not A12, correct?

 

[bentalebnordine]

It's not, I think it's A10
By the way to activate audio and d2w go to phh settings

 

[joegib]

It's not, I think it's A10
By the way to activate audio and d2w go to phh settings

I just checked -- the *.img file is 2.2. I will give it a try, though I wish it were a12.

 

[thomaskmaagaard]

I'm trying to flash a Lineage ROM that's 2.438 GB, but it says "Not enough space to resize partition". You said under 2.6 GB is fine so am i doing something wrong? I assume it's "fastboot flash system" to install.

Edit: Just now tried the one from your post and it's the same problem.

 

[bentalebnordine]

I'm trying to flash a Lineage ROM that's 2.438 GB, but it says "Not enough space to resize partition". You said under 2.6 GB is fine so am i doing something wrong? I assume it's "fastboot flash system" to install.

Edit: Just now tried the one from your post and it's the same problem.

Are you coming from Android 11 oxygen OS?

 

[thomaskmaagaard]

Are you coming from Android 11 oxygen OS?

I am, yes.

 

[bentalebnordine]

I am, yes.

Then you should switch to the a slot by running the command
fastboot --set-active=a
And start all over again.

 

[thomaskmaagaard]

Then you should switch to the a slot by running the command
fastboot --set-active=a
And start all over again.

I did that the first time. Also tried erasing system and product (didn't expect it to make a difference..). Can't seem to get it to flash anything. I can flash stock vbmeta and system and it boots fine again...

 

[bentalebnordine]

I did that the first time. Also tried erasing system and product (didn't expect it to make a difference..). Can't seem to get it to flash anything. I can flash stock vbmeta and system and it boots fine again...

I think you should reboot fastboot after switching to slot a. and flash vbmeta and vbmeta_system and run the command
fastboot reboot fastboot.
Then the command
fastboot flash system <your system>.img
Then the command
fastboot - w
Then the command
fastboot reboot
That's it.

 

[thomaskmaagaard]

I think you should reboot fastboot after switching to slot a. and flash vbmeta and vbmeta_system and run the command
fastboot reboot fastboot.
Then the command
fastboot flash system <your system>.img
Then the command
fastboot - w
Then the command
fastboot reboot
That's it.

I've been trying that, but i don't get past flashing system since it throws that error. It is a be2013 so it shouldn't have any issues. I've never had problems flashing recoveries and boot images.

 

[bentalebnordine]

I've been trying that, but i don't get past flashing system since it throws that error. It is a be2013 so it shouldn't have any issues. I've never had problems flashing recoveries and boot images.

Try booting in TWRP for Android 10 that you can find on the roms and recoveries section, if it boots you are correct, if not just boot in TWRP Android 11 click reboot and click reboot in a slot if the courent slot is b.
To boot on TWRP just run the command
fastboot boot twrp.img

 

[thomaskmaagaard]

So.. I'm thinking, maybe the problem is that I have OOS11 on both slots? Don't ask me why, it's a long story, but I do. Is it only possible to flash over OOS10?

 

[Sayitainttone88]

I'm trying to flash a Lineage ROM that's 2.438 GB, but it says "Not enough space to resize partition". You said under 2.6 GB is fine so am i doing something wrong? I assume it's "fastboot flash system" to install.

Edit: Just now tried the one from your post and it's the same problem.

yea i was tryna do the same exact thing and i messed around bricked my phone!! recovery.img doesnt even work to fix it,with the exception of twrp flashed in recovery i dont get a dang thing except either a complete black screen or "qualcomm crash dump". im stumped. even got another n100, same exact model, and everything i did before to unlock the network and bootloader isnt working anymore.

 

[TechX1991]

fastboot delete-logical-partition product

That command will allow for resizing of system partition and you can flash GAPPS, although its better to find a GSI with GAPPS baked in, as you'll have errors with GAPPS otherwise

Also, anyone with the flash issue of "system partition not big enough" ... the 2.6GB isn't the ROM.img, but after install. Use a GSI ROM that's around 1.9GB at largest, and it should fit. IMG files are compressed, similar to something like a ZIP file

Although every GSI I've tried causes either a bootloop or CrashDump

 

[VPH20]

Your saying, OP, Lineage launched GSI custom rom - what it means? Unofficial fork?

No Gapps? Can't you flash gapps after GSI is flashed?

Caos Rom for with Gapps? What is Caos and GSI difference?

 

[bentalebnordine]

Best gsi rom until now is

https://github.com/ponces/treble_build_pe/releases/download/v413/PixelExperience_arm64-ab-12.1-20220516-UNOFFICIAL.img.xz

 

[bentalebnordine]

The best custom rom for OnePlus n100 until now is

https://github.com/ponces/treble_build_pe/releases/download/v413.1-plus/PixelExperience_Plus_arm64-ab-12.1-20220518-UNOFFICIAL.img.xz

To successfully install it on your device, and the bootloader of your device is already unlocked than read the text file attached.
You will also need these files

OnePlus-USB-Drivers.zip

drive.google.com

Universal ADB Drivers

one_plus_nord_sdk.zip

drive.google.com

And also you need to extract the system image using 7zip program and put it on the one_plus_nord_sdk folder.