Best OnePlus 6 Screen Protectors

[hltbest]

I've just ordered 2x Orzly Tempered glass screen protectors. Will let people know what they are like!

 

[matteosaeed]

I've just ordered 2x Orzly Tempered glass screen protectors. Will let people know what they are like!

Nice. I was thinking about ordering those, since I had good luck with the 5T with them. Where did you order from?

 

[JedixJarf]

So far it sounds like those who got it are pleased. Perfect installation appears to require some effort in working out the bubbles, though. Those who've provided their feedback on the official OnePlus TGSP seem to recommend it. I went ahead and ordered one yesterday.

The official TGSP is great, bubbles aren't that big of an issue (at least for me they weren't). Much better than the TGSP for the oneplus 5t at launch

 

[hltbest]

Nice. I was thinking about ordering those, since I had good luck with the 5T with them. Where did you order from?

I found them on Amazon for £6.99 for two! They have the black edges (never had that before but thought I'd try it). Specifically states they work well with the curved screen and have some dots or something to prevent bubbles as it uses the screen edges to stick rather than the whole screen - again due to the curved screen edges.

 

[Gramzz]

What is different between Orzly glass and Nikkle glass. I want to use it with official Otterbox case from Oneplus site.

 

[harigavara]

Hey OP,

I am thinking to buy this. Will the front side screen be fully covered without any edge cuts? Can we apply it easily because I have no experience in applying before?

 

[kelly66]

I have ordered OnePlus 6 today.. And waiting that would come tomorrow.. This time it's almost 95 percent glass so protector would be must need to keep the device mint, especially for the BACK!!
So Let me start of the thread for the OnePlus 6 Screen Protector.
I have ordered OnePlus 6 Full body screen protector from the Gadgetshieldz.
And I hope this time it's merely impossible to get the best TGP soon. Please let know your suggestions.

Finally got my Gadgetshieldz protectors and applied it. The protector is fitting well and all the holes are perfect. Important part is, its providing lot of grip to the OP6 which is very slippery without the protector. Might go for a Tempered Glass for the screen if I find a decent one but the back protector is a keeper. Take a look at the images of the protectors applied on my OP6. Can't go wrong with these for a low price.

Hi, does it show the finger prints or it is completely smudge free? The glass would still break if we drop the phone, right? Or it is like a tempered glass protector for both front and back? Do the Skinnova skins (https://www.gadgetshieldz.com/oneplus-6-skins-decals-wraps.html) offer the same level of protection apart from adding to the looks?

One clear advantage is the grip that it would offer without adding to weight, but clarifications on the above points would help. I haven't used these before, hence these queries.


Thanks.

 

[Gramzz]

Do you know cost shipping in EU from Orzly store?

 

[boydivalor99]

I will order the same as allways: Ultimate Shield Screen Protector for One Plus 6. You can find them at ebay now. They are simply great in clear + protection, saved a lot of OP and other phones screens for me

 

[Eric214]

What is different between Orzly glass and Nikkle glass. I want to use it with official Otterbox case from Oneplus site.

If the Orzly is mentioning the Dot, that is the dot matrix in the glass. You will see rows of dots on your screen when the screen is off. I tried one and it was like OCD distracting to me. They do this when there is no adhesive on the full part of the glass but just on the black areas. This helps keep the oil slick effect from happening since the screen can lift a little bit. It also allows dust particles to get under the screen protector.

The Nillkin protector has no black borders and the protector has adhesive on 100% of the surface sealing it to your phones screen. This also is what allows a screen protector to take a fall and crack while letting the phone screen survive intact with no cracks. The Protectors that have no adhesive but on the edges don't protect from drops but just scratches.

As far as what will work with Otterbox.. look at YouTuber Big Unbox as he usually checks TGSP with cases to see what works with what. But if you have black edges on the screen protector, it likely isn't going to work with very many if any cases. The Nillkin was the rare glass protectors that worked with the Spigen Neo Hybrid case with the OP5

 

[Gramzz]

Wow @Eric214 I thank you for answer. So I buy Nillkin. And I will share with you how it's look with Otterbox.

For this moment I can tell you that original glass with Carbon Bumper suit and looks amazing.

 

[hltbest]

If the Orzly is mentioning the Dot, that is the dot matrix in the glass. You will see rows of dots on your screen when the screen is off. I tried one and it was like OCD distracting to me. They do this when there is no adhesive on the full part of the glass but just on the black areas. This helps keep the oil slick effect from happening since the screen can lift a little bit. It also allows dust particles to get under the screen protector.

The Nillkin protector has no black borders and the protector has adhesive on 100% of the surface sealing it to your phones screen. This also is what allows a screen protector to take a fall and crack while letting the phone screen survive intact with no cracks. The Protectors that have no adhesive but on the edges don't protect from drops but just scratches.

As far as what will work with Otterbox.. look at YouTuber Big Unbox as he usually checks TGSP with cases to see what works with what. But if you have black edges on the screen protector, it likely isn't going to work with very many if any cases. The Nillkin was the rare glass protectors that worked with the Spigen Neo Hybrid case with the OP5

Very interesting. I've never had dot matrix before... Guess I'll find out if I like it or not. As long as I cant see it when he screen is on I don't think I'll mind! I'll keep everyone posted with my experience!

 

[Hunkman]

Hi, does it show the finger prints or it is completely smudge free? The glass would still break if we drop the phone, right? Or it is like a tempered glass protector for both front and back? Do the Skinnova skins (https://www.gadgetshieldz.com/oneplus-6-skins-decals-wraps.html) offer the same level of protection apart from adding to the looks?

One clear advantage is the grip that it would offer without adding to weight, but clarifications on the above points would help. I haven't used these before, hence these queries.

Thanks.

It's not completely smudge free. You will still have fingerprints. It doesn't offer the kind of drop protection a case would offer. Yes, the grip is excellent. I got it for this sole reason.

Their skinnova skins I think cover the entire body including the sides. That is what their product images suggest on this link. https://www.gadgetshieldz.com/oneplus-6-skins-decals-wraps.html I think you will get even better protection as their skins are covering the sides.

 

[Hunkman]

Oh you bought this?
I'm thinking to buy but having few doubts. I hope you help with those.
Does this cover sides and edges also?
Can we apply it without errors?
Is it good and reliable from scratches and dents? Ofcoursei guess not from breaks.

I didn't get any sides in my order. You might want to checkout their product page. You will have to follow the instructions given on their how to page. I am a seasoned installer now after using their products so many times that I invariably apply it correctly everytime. It might give you excellent scratch protection and some dent protection but definitely no drop protection. And the self healing tech that they claim seems genuine. I see a lot of scratches going off on its own in a few hours. So the clean look is sustained.

 

[gsw5700]

I will order the same as allways: Ultimate Shield Screen Protector for One Plus 6. You can find them at ebay now. They are simply great in clear + protection, saved a lot of OP and other phones screens for me

How easy is it to fit? I've just given up with OnePlus protector, it's a nightmare

 

[harigavara]

I didn't get any sides in my order. You might want to checkout their product page. You will have to follow the instructions given on their how to page. I am a seasoned installer now after using their products so many times that I invariably apply it correctly everytime. It might give you excellent scratch protection and some dent protection but definitely no drop protection. And the self healing tech that they claim seems genuine. I see a lot of scratches going off on its own in a few hours. So the clean look is sustained.

Thanks a lot for info.
And you are saying you didn't get sides protectors.. did your package somehow missed them or full protection means only back and front?

 

[Gramzz]

I tried install original OP glass about 10 times on my OP6 because of bubbles. You have to install it perfectly if you want avoid it. I can advise to put it on one side and easily press with this plastic. Like on the sample movie.

When after few attempts I had dust under glass I took roll from Ikea to cleaning clothes and I clean glass with it. I know that sounds stupid but it works. And I have now perfectly glass without bubbles.

 

[aenews]

If the Orzly is mentioning the Dot, that is the dot matrix in the glass. You will see rows of dots on your screen when the screen is off. I tried one and it was like OCD distracting to me. They do this when there is no adhesive on the full part of the glass but just on the black areas. This helps keep the oil slick effect from happening since the screen can lift a little bit. It also allows dust particles to get under the screen protector.

The Nillkin protector has no black borders and the protector has adhesive on 100% of the surface sealing it to your phones screen. This also is what allows a screen protector to take a fall and crack while letting the phone screen survive intact with no cracks. The Protectors that have no adhesive but on the edges don't protect from drops but just scratches.

The Nilken is full coverage? I'm fairly sure it isn't. In my experience, the non-adhesive dot matrix protectors are terrible and all other normal glass protectors (Like the Nillkin or any glass protector you can pick up for even $1-2) omit the sides of the device and do not cover the whole screen. In fact, they cut off part of the screen and leave it naked. And unfortunately there haven't ever been curved glass protectors for OnePlus to my knowledge.

Very interesting. I've never had dot matrix before... Guess I'll find out if I like it or not. As long as I cant see it when he screen is on I don't think I'll mind! I'll keep everyone posted with my experience!

It's absolutely terrible and can be viewed when the screen is on depending on the lighting and angle. There also seems to be a greater loss in clarity.

 

[pappy97]

Anyone try the IQ Shield screen protector for Oneplus 6?

http://www.iqshield.com/iq32368-oneplus-6-phone-screen-protector.html

 

[JedixJarf]

Wow @Eric214 I thank you for answer. So I buy Nillkin. And I will share with you how it's look with Otterbox.

For this moment I can tell you that original glass with Carbon Bumper suit and looks amazing.

I just got my Nillkin, it's a pile of ****e, not contoured properly so the edges don't stick to the screen. Also tried out other random ones from asia, nothing works as well as the Oneplus branded tempered glass.