Best OnePlus 6 Screen Protectors

[l33twannabe]

Does it work with a case on?

Yeah, I'm using original OP6 protective carbon case (check the photo). I'm pretty sure it would go well with OP6 bumper cases as well.

 

[thetonyclifton]

Yeah, it's a hole (and this is the part that's different compared to the current photos from AliExpress offer). It looks really good, can't complain.

It is dot matrix though right? Not full adhesive?

 

[Dividedthoughts]

Here are some pics of that no name TG from AliExpress. It's not edge to edge, but still good enough for a 2,5$ TG. Not sure if it cuts any parts of the screen but if it does it's really hard to notice. Here's the link: https://www.aliexpress.com/item/32841807452/32841807452.html - however, it now looks a bit different on the photos compared to when I was ordering it, so it might be some other version/revision.

EDIT: It cuts just a little bit of the screen at the bottom, but it might be due to me placing TG a bit too high (like 0,3mm or so). Anyway, I can totally live with it.

I purchased one of these as well, from "Vifocal technologies" on ali. When I got it, I measured the distances lengthwise and widthwise and determined that it would cut off at least 2mm in each direction and didn't bother putting it on. I mentioned it in a review and even contacted the seller, and they claim it is a perfect fit as they used a 'real device' and insisted I put it on. I don't want to take off the preinstalled protector if I know this one is going to cut off the screen. Since the top has to be aligned with the camera, I'm assuming it's the bottom that gets cut off.

 

[dsdavis6]

I had oneplus 6 official bumper and screen protector. It all fit quite nicely however the lip of the bumper case is very shallow. I dropped my phone yesterday (quite innocuous drop I thought) and the Screen protectoris now broken. I'm pretty sure if there was no screen protector the phone screen probably wouldn't have broken. Seems very weak in my experience!

 

[h0LLe]

Well you can't tell if the display might have broken... At least it's not and you were lucky to have a screen protector on it. Im quite curious about a drop test and if the nylon case might help to prevent damages on the phone. Couldn't find any video like this.

 

[enerGy]

I'm now debating on getting a film protector as I have now tried two tempered glass versions with one being the official tempered glass and both were rubbish to say the least, also I have found out OnePlus support is useless lol excuse after excuse. I have been searching and searching reading review after review but seen this one as I was doing so. Skinomi TechSkin Full Coverage Screen Protector for OnePlus 6 Clear HD Anti-Bubble Film

https://www.amazon.co.uk/Protector-Skinomi%C2%AE-TechSkin-Coverage-Anti-Bubble/dp/B0765BN1V4/ref=sr_1_47?s=electronics&ie=UTF8&qid=1529572983&sr=1-47&keywords=oneplus+6+screen+protector#customerReviews
Haven't used this one before but though maybe someone here might have and could be useful to someone​

 

[B3501]

I'm now debating on getting a film protector as I have now tried two tempered glass versions with one being the official tempered glass and both were rubbish to say the least, also I have found out OnePlus support is useless lol excuse after excuse. I have been searching and searching reading review after review but seen this one as I was doing so. Skinomi TechSkin Full Coverage Screen Protector for OnePlus 6 Clear HD Anti-Bubble Film
View attachment 4531954
https://www.amazon.co.uk/Protector-...ds=oneplus+6+screen+protector#customerReviews
Haven't used this one before but though maybe someone here might have and could be useful to someone​

I think they have the horrible orange peel/tpu type effect do they not?

Sent from my ONEPLUS A6003 using Tapatalk

 

[enerGy]

I think they have the horrible orange peel/tpu type effect do they not?

Sent from my ONEPLUS A6003 using Tapatalk

I honestly don't know mate just seen it had a load of good reviews compared to most

 

[B3501]

I honestly don't know mate just seen it had a load of good reviews compared to most

I've been through so many protectors for so many phones I've lost track of which are like what.

Sent from my ONEPLUS A6003 using Tapatalk

 

[l33twannabe]

How about this one: https://www.aliexpress.com/item/For...n-Protector-Film-for-OnePlus/32842040089.html ?

Looks like solid, an edge to edge TGSP. The seller has got some good opinions as well.

 

[RzuwBuotny]

How about this one: https://www.aliexpress.com/item/For...n-Protector-Film-for-OnePlus/32842040089.html ?

Looks like solid, an edge to edge TGSP. The seller has got some good opinions as well.

Looks great.

Wysłane z mojego ONEPLUS A6003 przy użyciu Tapatalka

 

[Gr8man001]

I honestly don't know mate just seen it had a load of good reviews compared to most

If you are going with wet installation, this may be a little better choice. I have used this brand on my previous 2 phones and was happy about it. Be forewarned that the first few days, screen protector is going to be finger magnet. It gets better within 7-10 days of usage. It's crytal clear though.
https://www.amazon.com/OnePlus-Prot...r=8-3&keywords=screen+protector+for+oneplus+6

 

[enerGy]

If you are going with wet installation, this may be a little better choice. I have used this brand on my previous 2 phones and was happy about it. Be forewarned that the first few days, screen protector is going to be finger magnet. It gets better within 7-10 days of usage. It's crytal clear though.
https://www.amazon.com/OnePlus-Prot...r=8-3&keywords=screen+protector+for+oneplus+6

Nice thank you bro, I actually might get the full coverage one and protect it all.
https://www.amazon.com/OnePlus-Protector-LiQuidSkin-Coverage-Anti-Bubble/dp/B0765BXWHT/ref=sr_1_3?s=wireless&ie=UTF8&qid=1529693095&sr=1-3&keywords=iq+shield+oneplus+6

 

[Gr8man001]

Nice thank you bro, I actually might get the full coverage one and protect it all.
https://www.amazon.com/OnePlus-Protector-LiQuidSkin-Coverage-Anti-Bubble/dp/B0765BXWHT/ref=sr_1_3?s=wireless&ie=UTF8&qid=1529693095&sr=1-3&keywords=iq+shield+oneplus+6

Install the flat part of the screen first. Then use a hair dryer to the protector sides and slowly mold to the curved sides using the thumb and a finger. You will have a bubble free skin protector for a very long time.

 

[mitar1982]

Same issues here with Nillkin H+ Pro. Bought it on Aliexpress and fortunately got my money back via dispute. I've given Nillkin one more chance and ordered Nillkin Amazing 3D CP+. If it doesn't work nicely with OP6 then my next choice will be original OnePlus 6 3D Tempered Glass Screen Protector. It's expensive but at least I know it will fit the device properly.

I did exactly the same. I hope that 3D CP+ will be better, H+ Pro doesn't fit OP6 good.

 

[fulljionslly]

Yeah, I have saw that YouTube Video. For that phone factory is located in beautiful China. For the best screen protectors most production from Shenzhen,China.

 

[biron_w]

If you are going with wet installation, this may be a little better choice. I have used this brand on my previous 2 phones and was happy about it. Be forewarned that the first few days, screen protector is going to be finger magnet. It gets better within 7-10 days of usage. It's crytal clear though.
https://www.amazon.com/OnePlus-Prot...r=8-3&keywords=screen+protector+for+oneplus+6

I can vouch for IQShield as well. Had one on another phone and it was very good.

 

[edeezz]

Anyone using the rhinoshield screen impact protector?

 

[axelrodmagma]

Anyone using the rhinoshield screen impact protector?

I ordered one just today I have used crash guard before let's see how is the impact shield

 

[edeezz]

I ordered one just today I have used crash guard before let's see how is the impact shield

Oh awesome, I will be ordering mine this week. Plus I've got a 20% discount on everything.