[BETA][DUK] TWRP 3.1.1-1 [+ROOT]

Search This thread

OldDroid

Recognized Developer
Nov 18, 2012
1,768
6,952
Berlin
teamwin-recovery-project-twrp-logo.jpg



This is only for Honor 8 Pro (DUK)
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x.
Intended for usage on stock emui 5.x in combination with unlocked bootloader .


Installation Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.1-1-duk.img
3. reboot to recovery!

Rooting Methods
Code:
[B][U]1. Official PHH Superuser Beta 310[/U][/B]
1. download and flash [URL="http://superuser.phh.me/superuser-r310-beta.zip"]official PHH Superuser Beta 310[/URL]
2. install "Phh Superuser" from Google Play
3. Enjoy!


Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_honor_duk/releases/download/3.1.1-1/twrp-3.1.1-1-duk.img"][U]download twrp-3.1.1-1-duk.img[/U][/URL]
[/LIST]


FAQ
Code:
Q: What's the code status?
A: 25. June 2017

Q: which H8 Pro models are supported?
A: every model should be supported.

Q: Can i use this TWRP with decrypted /data?
A: Yes you can! (Check FAQ)

Q: Can i install Magisk?
A: No (encrypted /data), Yes (decrypted /data)

Q: Does official SuperSU work?
A: No (encrypted /data), Yes (decrypted /data)

Q: ETAs?
A: No.

Going back from decrypted -> encrypted?
Code:
1. Format /data inside of TWRP
2. Flash eRecovery & Kernel from your currently installed Stock ROM Build
3. Do a factory reset inside of eRecovery
5. Let device boot up
6. Install your current firmware hw_data package & SuperSU using TWRP again
Want to decrypt? No problem.
Code:
1. Format /data inside of TWRP
2. Flash a kernel with fileencryption disabled in fstab
3. bootup your device


Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]

XDA:DevDB Information
TWRP, Tool/Utility for the Honor 8 Pro

Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin/android_device_honor_duk


Version Information
Status: Beta

Created 2017-06-23
Last Updated 2017-06-25
 

Attachments

  • Screenshot_20170623-173648.png
    Screenshot_20170623-173648.png
    172 KB · Views: 4,743
Last edited:

blattes86

Member
Jun 24, 2017
5
0
Hello,
I tested the package, unfortunately after the flash and first boot impossible to return under android.
If I remember correctly there was a problem of mount point.

To get out I had to flasher the recovery and system partitions of the original rom.
Having to reset my phone I have no log, but if you need anything else do not hesitate.

@ +

Via google translate
 

OldDroid

Recognized Developer
Nov 18, 2012
1,768
6,952
Berlin
Hello,
I tested the package, unfortunately after the flash and first boot impossible to return under android.
If I remember correctly there was a problem of mount point.

To get out I had to flasher the recovery and system partitions of the original rom.
Having to reset my phone I have no log, but if you need anything else do not hesitate.

@ +

Via google translate
this should work for every h8 pro utilizing emmc storage:
https://drive.google.com/open?id=0BxWP2gF_0Bd_OHBPWDctZmJCanc

It has been tested.

Regards
 

maddacas

Member
Nov 13, 2007
17
1
I flashed emmc version and supersu. For going in twrp I've to clic in the middle of the volume button and the power on.
 
Last edited:

Krystal666

Member
May 8, 2017
43
3
Interesting, i tried to install it but i'm stuck with installion...i know how to enter fastboot mode with phone plugged to my computer with android sdk on, but the adb files look to be missing when i check with cmd...

Can anyone here give a quick tutorial ? Thanks :)
 
Last edited:

SoulInferno

Member
Jun 2, 2014
20
6
Wow that was faster than I could learn to do it.
Great job. May I ask how you got the important informations to build this?
Did you inject su into the image to gain root and then read all the detailed data through terminal or adb or root file explorer?

Just asking cause i train my brain more and more in my spare time and want to get behind the knowledge base to learn. :good:
 

smouker

Senior Member
Oct 23, 2011
339
83
Bern
First of all thank you for your work, I got the Recovery, root, Magisk, etc. running.

I have 2 Questions:
1. the internal storage when I boot to the recovery looks like enrypted (lots of random named folders). Is it possible to decrypt it for now, since there is currently no custom kernel available?
2. Can I flash the Firmware update to 130b in TWRP? If yes, wich package do I need to choose?

Cheers
 
Last edited:

adriansticoid

Senior Member
Jul 5, 2014
7,492
1,589
23
San Pedro, Laguna
First of all thank you for your work, I got the Recovery, root, Magisk, etc. running.

I have 2 Questions:
1. the internal storage when I boot to the recovery looks like enrypted (lots of random named folders). Is it possible to decrypt it for now, since there is currently no custom kernel available?
2. Can I flash the Firmware update to 130b in TWRP? If yes, wich package do IP need to choose?

Cheers
Format the whole internal storage to remove encryption.
 
  • Like
Reactions: smouker

adriansticoid

Senior Member
Jul 5, 2014
7,492
1,589
23
San Pedro, Laguna
can I restore Data via TWRP without problems?
Yes it should work. Just make sure that both backup and restore destinations are either both encrypted or both decrypted.

After testing, formatting the whole internal storage does not work.
To restart the partition is new encrypt
What do you mean to restart the partition is new encrypt?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 16
    teamwin-recovery-project-twrp-logo.jpg



    This is only for Honor 8 Pro (DUK)
    Code:
    OpenKirin presents unofficial TWRP for stock EMUI 5.x.
    Intended for usage on stock emui 5.x in combination with unlocked bootloader .


    Installation Instructions
    Code:
    1. Enter fastboot mode on unlocked device
    2. flash recovery using the following command: fastboot flash recovery twrp-3.1.1-1-duk.img
    3. reboot to recovery!

    Rooting Methods
    Code:
    [B][U]1. Official PHH Superuser Beta 310[/U][/B]
    1. download and flash [URL="http://superuser.phh.me/superuser-r310-beta.zip"]official PHH Superuser Beta 310[/URL]
    2. install "Phh Superuser" from Google Play
    3. Enjoy!


    Downloads
    Code:
    [LIST]
    [URL="https://github.com/OpenKirin/android_device_honor_duk/releases/download/3.1.1-1/twrp-3.1.1-1-duk.img"][U]download twrp-3.1.1-1-duk.img[/U][/URL]
    [/LIST]


    FAQ
    Code:
    Q: What's the code status?
    A: 25. June 2017
    
    Q: which H8 Pro models are supported?
    A: every model should be supported.
    
    Q: Can i use this TWRP with decrypted /data?
    A: Yes you can! (Check FAQ)
    
    Q: Can i install Magisk?
    A: No (encrypted /data), Yes (decrypted /data)
    
    Q: Does official SuperSU work?
    A: No (encrypted /data), Yes (decrypted /data)
    
    Q: ETAs?
    A: No.

    Going back from decrypted -> encrypted?
    Code:
    1. Format /data inside of TWRP
    2. Flash eRecovery & Kernel from your currently installed Stock ROM Build
    3. Do a factory reset inside of eRecovery
    5. Let device boot up
    6. Install your current firmware hw_data package & SuperSU using TWRP again
    Want to decrypt? No problem.
    Code:
    1. Format /data inside of TWRP
    2. Flash a kernel with fileencryption disabled in fstab
    3. bootup your device


    Special Thanks
    Code:
    * [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
    * [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]

    XDA:DevDB Information
    TWRP, Tool/Utility for the Honor 8 Pro

    Contributors
    OldDroid, surdu_petru, XePeleato
    Source Code: https://github.com/OpenKirin/android_device_honor_duk


    Version Information
    Status: Beta

    Created 2017-06-23
    Last Updated 2017-06-25
    7
    Reserved

    Changelog
    Code:
    [B]TWRP 3.1.1-1[/B]
    * fix twrp on emmc based devices
    4
    New Version (3.1.1-1) available - You can find more infos in OP.
    This release fixes partition mounting on emmc 5.1 based devices ;)
    Source code is now also up and can be built!

    https://github.com/OpenKirin/android_device_honor_duk

    Regards
    3
    Hello,
    I tested the package, unfortunately after the flash and first boot impossible to return under android.
    If I remember correctly there was a problem of mount point.

    To get out I had to flasher the recovery and system partitions of the original rom.
    Having to reset my phone I have no log, but if you need anything else do not hesitate.

    @ +

    Via google translate
    this should work for every h8 pro utilizing emmc storage:
    https://drive.google.com/open?id=0BxWP2gF_0Bd_OHBPWDctZmJCanc

    It has been tested.

    Regards
    2
    Just an off topic but important.
    As Honor 9 has launched also it confuses me a lot about display size whether to choose Honor 8pro or Honor 9 . Am using a 5.5 inch display fone now...
    Just need some good opinions whether I have to go with 5.7 inch Honor 8pro or Smaller 5.2 inch Honor 9 . Will I feel unsatisfied with smaller 5.2 inch Honor 9 ? Rest of the specs am ok with it.
    I used to browser net and watch YouTube videos mainly. Please help
    Depends on the size of your hand man and your comfort zone. If it was me making the choice, I would go for the Honor 8 Pro because of the bigger battery and screen. It's a little hard to hold but it's worth it. :)

    Sent from my Honor 8 using XDA Labs
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone