Boostmobile or Other Sprint MVNO lost signal after KIT KAT update fix

[bremos812]

AFTER UPDATING TO KIT KAT MY PHONE LOST SIGNAL

HOW TO FIX
________________

You will need to downgrade your modem firmware
I've have included the MJ4 modem firmware in the download link
simple flash with odin

HOW TO FIX AFTER RESET
------------------------------
If you did like me and reset your phone trying to get signal
before you downgrade the modem make sure your phone is flash
you will not have signal yet so double check your work
then ODIN down to MJ4 modem

HOW TO FIX NO DATA CONNECTION & HFA
--------------------------------
Your phone must be rooted
Use root explorer extract files from note3 carrier.zip
and copy and paste all in carrier folder
reset phone and run profile update

https://www.dropbox.com/s/ef90ey40amadkbs/KIT KAT SIGNAL.rar
(invalid fixed)

WRITNG NEW PRL
------------------------------------
PRL HELPER FROM THE PLAYSTORE


credit to insanecain and Alpineman for his HFA FIX

 

[beeroatsnp90x]

AFTER UPDATING TO KIT KAT MY PHONE LOST SIGNAL

HOW TO FIX
________________

You will need to downgrade your modem firmware
I've have included the MJ4 modem firmware in the download link
simple flash with odin

HOW TO FIX AFTER RESET
------------------------------
If you did like me and reset your phone trying to get signal
before you downgrade the modem make sure your phone is flash
you will not have signal yet so double check your work
then ODIN down to MJ4 modem

HOW TO FIX NO DATA CONNECTION & HFA
--------------------------------
Your phone must be rooted
Use root explorer extract files from note3 carrier.zip
and copy and paste all in carrier folder
reset phone and run profile update

https://www.dropbox.com/s/ef90ey40amadkbs/KIT KAT SIGNAL.rar


credit to insanecain and Alpineman for his HFA FIX

the md5 is invalid. Downloaded twice.

 

[bremos812]

sorry

rename it modem.tar.md5 from MJ4modem.tar.md5

 

[Shyne888]

rename it modem.tar.md5 from MJ4modem.tar.md5

I need help. I have a phone with a red x on it and i would love to get this working. The link says that nothing is there.

 

[damastah]

I need help. I have a phone with a red x on it and i would love to get this working. The link says that nothing is there.

I have this file too. I posted it in the development section. if you have an invalid Md5 error, remove the .md5 extention because usually, the file was renamed after and changed the checksum. Not safe to do, because there's no verification, but it works

 

[galaxys3on3g]

How can i write 3g data on sprint galaxy note 3 over boost

Yesterday i flash my sprint galaxy note 3 kikat 4.4.2 -mj4 but only have calls and texts with no data, anybody knows how can i write 3g data i already use cdma ws 3.7 and 3.9 doesn't work i know this processes very well since 2009 but kitkat has a lot of problems

 

[brianbri6]

Yesterday i flash my sprint galaxy note 3 kikat 4.4.2 -mj4 but only have calls and texts with no data, anybody knows how can i write 3g data i already use cdma ws 3.7 and 3.9 doesn't work i know this processes very well since 2009 but kitkat has a lot of problems

have you tired using DFS? thats what I use to get 3G working on the S4 and most newer samsung phones.

---------- Post added at 11:56 AM ---------- Previous post was at 11:53 AM ----------

AFTER UPDATING TO KIT KAT MY PHONE LOST SIGNAL

HOW TO FIX
________________

You will need to downgrade your modem firmware
I've have included the MJ4 modem firmware in the download link
simple flash with odin

HOW TO FIX AFTER RESET
------------------------------
If you did like me and reset your phone trying to get signal
before you downgrade the modem make sure your phone is flash
you will not have signal yet so double check your work
then ODIN down to MJ4 modem

HOW TO FIX NO DATA CONNECTION & HFA
--------------------------------
Your phone must be rooted
Use root explorer extract files from note3 carrier.zip
and copy and paste all in carrier folder
reset phone and run profile update

https://www.dropbox.com/s/ef90ey40amadkbs/KIT KAT SIGNAL.rar
(invalid fixed)

WRITNG NEW PRL
------------------------------------
PRL HELPER FROM THE PLAYSTORE


credit to insanecain and Alpineman for his HFA FIX

dropbox link doesnt work

 

[justencase6]

lost signal after flash to boost

im having something of the same issue ,I tryed in stock and kitkatkiller im on NC5 and every time i flash to boost i loose signal ,i flash back to sprint and its back,i noticed when i flash to sprint my PRL goes to 1 insted of 30030 that i use on my htc one, i have tryed flashing different prls and a old modem dont know witch one it was it wasn't labeled and the one in this poast the link is dead,please help,im upgrading from a htcone o boost that is fulling working and can read everything.

 

[justencase6]

I figured it out.the modem is attached to the esn some how that's all I'm going to say.i had to jump throw 20 hoops to get DFS to work properly also.but I'm fully on boost mobile with my note3 .just some fine tweaks to kitkatkiller and I'll b loving it.

 

[creed7727]

I figured it out.the modem is attached to the esn some how that's all I'm going to say.i had to jump throw 20 hoops to get DFS to work properly also.but I'm fully on boost mobile with my note3 .just some fine tweaks to kitkatkiller and I'll b loving it.

i have the same thing going on over here what did you do to flash it can you pm me what you did ?

 

[tankdog03]

U get 4g lte working to?

Sent from my SM-G900P using Tapatalk

 

[rbebber]

is there anyway to just flash a rom and not update the modem?

 

[J_apa_n]

I figured it out.the modem is attached to the esn some how that's all I'm going to say.i had to jump throw 20 hoops to get DFS to work properly also.but I'm fully on boost mobile with my note3 .just some fine tweaks to kitkatkiller and I'll b loving it.

I've had this problem for a while.
After MJ4, no radio seem to work for boost.
The only idea that makes sense to me is the NV items.

I'm no expert, just throwing out an idea.

---------- Post added at 10:20 AM ---------- Previous post was at 10:17 AM ----------

is there anyway to just flash a rom and not update the modem?

a "dirty" flash will do it, but it may come with rom issues.
worse case, just Odin the baseband tar.

 

[rbebber]

what rom did you dirty install? I installed bonsai 1.0 over .5 and it just stayed at the note3 screen. Did you have in upgrade the recovery first, or anything like that? ThaNKS.

 

[J_apa_n]

what rom did you dirty install? I installed bonsai 1.0 over .5 and it just stayed at the note3 screen. Did you have in upgrade the recovery first, or anything like that? ThaNKS.

Most of the time when your rom wont boot, its a kernel issue.
I dirty flashed Freeza's NH7 rom.

I'm inclined to believe our problems stem from "wifi calling".
It was introduced in NC5 if im not mistaken, & thats when boost Note 3's started to have problems.

 

[J_apa_n]

I've found an interesting anomaly with the modem issue.
after the MJ baseband, all the newer modems flash APNHLOS to our phones.
not sure just yet what it does, or how its attached to the MEID, but that's my find.

Any ideas?

 

[vipersinu2]

n900p red x no signal fix

n900p red x no signal fix
got it fixed, even though supersu disabled knox, there was still a security issue. I used titanium backup and searched for knox. then I disabled everything that had to do with knox, instantantly t-mobile pop up.

 

[phat0074]

I have a sprint note 3 with boost mobile sim but when I flash darkwolf pure lite rom everything works but sending text anybody had this issue with Sprint roms or know of a fix