How To Guide Boot to 9008 Mode (EDL Mode) using Test Point Method

Search This thread
By:
Advanced…
X

xXEphie

Member
Nov 26, 2017
9
2
IGNORE THIS GUIDE IF YOU CAN BOOT TO 9008 MODE USING A SPECIAL EDL CABLE.

May this guide help other POCO F4 GT/K50 Gaming users/technicians/developers in case of hard-brick due to software issues.
You may do this at your own, but I strongly recommend to go to Xiaomi/POCO/Redmi repair shop/Service Centers or to a certified technician in case of hard brick to properly diagnose the problem of your device.

How to boot to 9008 Mode using test point method:

1. Disconnect your phone from PC.
2. Disconnect battery flex (you need to disconnect this because the other test point is under this flex).
3. Press and Hold and short 2 pin via pincet or tweezers.
4 . Connect USB cable (preferably use the cable provided from the box).
5. When the device vibrates, release the pincet or tweezers and connect the battery flex fast. (On my first try, device exits 9008 Mode if you haven't connected the battery within 10-15 seconds).

I will not include on this post how to install Qualcomm Drivers. You may search the forums/internet for that.

P.S. I wrote this up based on my experience. Don't come pointing a finger on me if something bad/worst happens.
P.S.S. I'm not a tech myself, but with background on this field (I.T. graduate).
 

Attachments

  • POCO F4 GT 9008 Test Point.png
    POCO F4 GT 9008 Test Point.png
    1.4 MB · Views: 191
  • Like
Reactions: snx413 and ps000000
G

Gendgy

New member
Jan 10, 2015
1
0
Xiaomi Poco F4 GT / Redmi K50 Gaming
I didn't know that Mediatek processors support EDL and Test Point!
Interesting
 
snx413

snx413

Senior Member
Nov 25, 2012
132
40
Realme 6
Xiaomi 12T Pro
This saved me bro, this device is unkillable, i flashed other device firmware and no more boot, USB, the device was dead and finnaly it revived my device many month afrer, i tryed this but with battery and not USB plug,
I had to pay 17usd to flash again due to account dont have right to full flash...
 
Last edited:
  • Like
Reactions: xXEphie
X

xXEphie

Member
Nov 26, 2017
9
2
snx413 said:
This saved me bro, this device is unkillable, i flashed other device firmware and no more boot, USB, the device was dead and finnaly it revived my device many month afrer, i tryed this but with battery and not USB plug,
I had to pay 17usd to flash again due to account dont have right to full flash...
Click to expand...
Click to collapse
Glad to hear that your device was saved. You saved so much because I had paid $29 for the tech guy.
 
snx413

snx413

Senior Member
Nov 25, 2012
132
40
Realme 6
Xiaomi 12T Pro
Yeah i know , i found him a video of poco f4 gt, how to unbrick poco f4 gt 9008, and i contacted the guy on telegram, many times ago i paid 26€ with a russian so i know it was a good price
 
You must log in or register to reply here.

Similar threads

O
General K50 Gaming Edition - Poco F4 GT
Replies
100
Views
36K
S
splink2
HassanMirza01
Development [ROM][INGRES][MIUI][V14.0.23.5.22.DEV][14.0.7] EliteRom MIUI 14 A13 for POCO F4 GT / K50 Gaming
Replies
27
Views
9K
HassanMirza01
HassanMirza01
niiiiikn
Development TWRP Recovery for Xiaomi Poco F4 GT / Redmi K50 Gaming
Replies
7
Views
4K
A
Anasos666
belandresw
Question GCam for Poco F4 GT
Replies
2
Views
3K
J
JPMuller
Luftikus
Question Unlock Bootloader and root on Poco F4 GT
Replies
7
Views
3K
Luftikus
Luftikus

Top Liked Posts

24 Hours 30 Days All time
  • There are no posts matching your filters.
  • 1
    snx413
    snx413
    This saved me bro, this device is unkillable, i flashed other device firmware and no more boot, USB, the device was dead and finnaly it revived my device many month afrer, i tryed this but with battery and not USB plug,
    I had to pay 17usd to flash again due to account dont have right to full flash...
    View
  • 2
    X
    xXEphie
    IGNORE THIS GUIDE IF YOU CAN BOOT TO 9008 MODE USING A SPECIAL EDL CABLE.

    May this guide help other POCO F4 GT/K50 Gaming users/technicians/developers in case of hard-brick due to software issues.
    You may do this at your own, but I strongly recommend to go to Xiaomi/POCO/Redmi repair shop/Service Centers or to a certified technician in case of hard brick to properly diagnose the problem of your device.

    How to boot to 9008 Mode using test point method:

    1. Disconnect your phone from PC.
    2. Disconnect battery flex (you need to disconnect this because the other test point is under this flex).
    3. Press and Hold and short 2 pin via pincet or tweezers.
    4 . Connect USB cable (preferably use the cable provided from the box).
    5. When the device vibrates, release the pincet or tweezers and connect the battery flex fast. (On my first try, device exits 9008 Mode if you haven't connected the battery within 10-15 seconds).

    I will not include on this post how to install Qualcomm Drivers. You may search the forums/internet for that.

    P.S. I wrote this up based on my experience. Don't come pointing a finger on me if something bad/worst happens.
    P.S.S. I'm not a tech myself, but with background on this field (I.T. graduate).
    View
    1
    snx413
    snx413
    This saved me bro, this device is unkillable, i flashed other device firmware and no more boot, USB, the device was dead and finnaly it revived my device many month afrer, i tryed this but with battery and not USB plug,
    I had to pay 17usd to flash again due to account dont have right to full flash...
    View

New posts