BootLoop post Viper4Android module on Magisk with Lineage 15/Oreo

Aykee

Member
Dec 11, 2017
10
0
0
Chicago
Lineage /Oreo was installed thru TWRP 3.xxx, running fine but unhappy , no Viper4Android , so I installed it as a module on Magisk,
after installing the driver, was ask to reboot as directed, but went into bootloop , stuck on a boot loop " Set Warranty Bit : kernel " top left corner and Samsung Galaxy Note 3 on screen ; I tried Vol Up +Home+ power combo and all other combi I could think but no luck , Odin wont recognize my phone, tried Samsung 300k tool with no luck, I fell like a newbie after using so many ROMs on all of my devices, I google how to get back to download mode but no luck, I need help to make my Samsung note 3 work again, PLEASE. THANKS.
 

AndroidHacker99

Senior Member
Aug 25, 2013
55
17
0
Springport, MI
Hi,

I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.

I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.

Best of luck.

EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.

Sent from my SM-N900T using Tapatalk
 

Aykee

Member
Dec 11, 2017
10
0
0
Chicago
Hi,

I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.

I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.

Best of luck.

EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.

Sent from my SM-N900T using Tapatalk
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
 

AndroidHacker99

Senior Member
Aug 25, 2013
55
17
0
Springport, MI
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
You need to take the battery out to force it out of the bootloop then push volume DOWN, home & power.

Sent from my SM-N900T using Tapatalk
 

Aykee

Member
Dec 11, 2017
10
0
0
Chicago
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.

Sent from my toaster using Magic
I did all button combination, cant get into download nor recovery mode , am not sure if buttons are wack but it feel responsive and clicky but thanks anyway am going for the USB jig, I never had one.
 

Aykee

Member
Dec 11, 2017
10
0
0
Chicago
Removed the battery, inserted the jig, and then inserted a charged battery?
The jig that I bought didnt do anything so I make my own, I can go to download mode now, installed this ROM/firmware N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5 succesfully but wont go pass beyond the tmobile logo, tried a few more firmware and lately this N900TUVUFOL1 and also , am stuck to Tmobile logo, anybody knows which firmware would likely bring my note 3 back to life, thanks in advance.::confused:
 

audit13

Recognized Contributor
Jun 4, 2012
12,915
5,046
0
Toronto
Try this:

Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
 

Aykee

Member
Dec 11, 2017
10
0
0
Chicago
Try this:

Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
After "reset" status, I did remove cable, remove batt and boot up to recovery, the blue light lit up as if its going to recovery mode , android logo showed up but phone boot up to normal but not pass beyond tmobile logo, so I did CF-root via odin , but still not booting to recovery. :confused:
 

Attachments

Aykee

Member
Dec 11, 2017
10
0
0
Chicago
Try flashing the entire ROM in AP.
Thanks Audit13,

I manage to restore my Note 3 to TMobile Android 5 using repair firmware , it looks like I wipe out the partition ,My phone runs like new, am just wondering why I cant go to Download mode with button combinations of Volume -/Home/power , tried to install twrp via Odin, it says PASS but Vol +/Home/Power wont lead me to bootloader, did tried CWM , it will boot up but before I could start using it, it will reboot to normal and I could not go back to bootloader with button combo Vol+/Home/Power........HELP...:confused:
 

audit13

Recognized Contributor
Jun 4, 2012
12,915
5,046
0
Toronto
Download mode is volume down+home+power.

To flash TWRP with Odin, try this:

Open Odin and only check f reset time. Flash TWRP. When you see the word reset in the Odin status window, remove the USB cable from the phone, remove the battery, replace battery, press home + volume up + power.
 

Aykee

Member
Dec 11, 2017
10
0
0
Chicago
N900TUVUFOB6_N900TTMBFOB6_TMB and N900 PIT - are the files am using after screwing up my partition( I dont know how I did that ), this Note 3 is running like a hot knife on a butter BUT the only bug I notice is Volume Up + Home + Power ( recovery) NOR Volume Down + Home + Power (download ) does not work, I can only go to download mode using a USB JIG and no other way. I can flash TWRP via Odin with Auto-reboot not ticked , so I could remove cable, battery , hoping to get me to recovery mode but I couldnt. Did I miss a step?I need help.
 
Last edited: