Brick? After digitizer replacement? Need help ASAP

[lokoz89]

My cousin asked me to replace his Aria's cracked digitizer and I did. When I tried turning it on to see if it worked, the screen had backlight but it was black and the orange led light kept flashing. It didn't move from there. I took off the battery and tried it again and it went to what looked like S-On HBOOT FASTBOOT screen. It wont respond to the volume keys to go down or up on the selection menu and the power button won't select anything. I tried plugging it to the computer but it only does the same thing and sometimes the orange led light doesn't flash it'll just be orange.
This is exactly what it says
LIBERTY PVT SHIP S-ON
HBOOT-0.57.0000
MICROP-031b
TOUCH PANEL-STN21_00
RADIO-7.08.35.06
May 8 2010,03:56:58

HBOOT (this part is highlighted in blue and when i connect the usb to the pc it'll say HBOOT USB PLUG)

<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item

FASTBOOT(This is highlighted in blue)
RECOVERY (not highlighted but is green colored)
CLEAR STORAGE
SIMLOCK(not highlighted but colored blue)

then it has three android bots on skateboards at the bottom

I tried putting the Original shipped file as a zip in the sd card but when it checks to see if there's any to flash it doesn't recognize i guess because it doesn't tell to me to continue with the installation or anything.

IDK what to do ?
Please help ! Thanks in advance!

 

[WinSuk]

Is it possible you have the wrong digitizer? I noticed this line:

TOUCH PANEL-STN21_00

Mine says TOUCH PANEL-STN21_03, and any other images I can find on Google are the same

I know there are two types for Liberty, Synaptics & Atmel.. I'm not sure if the hardware detects which one is installed and switches over, but if it doesn't you may have an Atmel one and the phone came with Synaptics.
It might be something for a different phone too
(Libertys with Atmel are something like "TOUCH PANEL-ATMEL224_16ab")

Does it work and boot with the old one put back in? (if that's possible.. I haven't had to replace any digitizers, so don't really know what happens)

 

[ishow0806]

Is it possible you have the wrong digitizer? I noticed this line:

Mine says TOUCH PANEL-STN21_03, and any other images I can find on Google are the same

I know there are two types for Liberty, Synaptics & Atmel.. I'm not sure if the hardware detects which one is installed and switches over, but if it doesn't you may have an Atmel one and the phone came with Synaptics.
It might be something for a different phone too
(Libertys with Atmel are something like "TOUCH PANEL-ATMEL224_16ab")

Does it work and boot with the old one put back in? (if that's possible.. I haven't had to replace any digitizers, so don't really know what happens)

But my little aria is

LIBERTY PVT SHIP S-OFF
HBOOT-6.02.1002
MICROP-031b
TOUCH PANEL-STN21_00
RADIO-7.13.35.13
Nov 4 2010,23:12:58

and I am used Revolutionary to let it S-OFF
By the way,my aria is made in Taiwan and bought it in Taiwan,too

 

[WinSuk]

But my little aria is

LIBERTY PVT SHIP S-OFF
HBOOT-6.02.1002
MICROP-031b
TOUCH PANEL-STN21_00
RADIO-7.13.35.13
Nov 4 2010,23:12:58

and I am used Revolutionary to let it S-OFF
By the way,my aria is made in Taiwan and bought it in Taiwan,too

Hmm I guess that doesn't matter then
It could still be wrong and the boot loader doesn't change though