brick s3 frontier

[gurinder073]

Guys i need usb jig for my gear s3 any one provide me link of it so i can buy

 

[adfree]

You checked this Thread?
Service Manuals and USB Pinouts etc. inside:
https://forum.xda-developers.com/gear-s3/how-to/gear-s3-android-wear-port-wip-t3584588

Here is also USB Pinout inside... to try without Factory Pogo JIG...

Depend on your skills... maybe it is possible to connect wires without soldering...


I have only SM-R732 (SM-R720) knowledge...
I have to solder because it is so f. tiny...
https://forum.xda-developers.com/showpost.php?p=72097974&postcount=113

And I have damaged something during soldering...
But in main it is alive...


Maybe SM-R760 and SM-R770 are "easier" to handle... maybe you can connect wires through the Pogo contacts without soldering...
Or glue or "needle" or try to create something or your friends have an idea...

Look at the Pics...
I have tried to prepare some solderless ideas... but failed because it is toooooo tiny...
https://forum.xda-developers.com/showpost.php?p=72094300&postcount=111

SM-R732 and SM-R720 have contacts in 1 rope...


I'm missing Pictures of Gear S3 solutions...
Maybe users allready found solderless connection without Factory Pogo JIG...


Best Regards

 

[gurinder073]

Thanks. ??

 

[gurinder073]

Thanks but problem is that i don't know which wire connect to which pogo

You checked this Thread?
Service Manuals and USB Pinouts etc. inside:
https://forum.xda-developers.com/gear-s3/how-to/gear-s3-android-wear-port-wip-t3584588

Here is also USB Pinout inside... to try without Factory Pogo JIG...

Depend on your skills... maybe it is possible to connect wires without soldering...


I have only SM-R732 (SM-R720) knowledge...
I have to solder because it is so f. tiny...
https://forum.xda-developers.com/showpost.php?p=72097974&postcount=113

And I have damaged something during soldering...
But in main it is alive...


Maybe SM-R760 and SM-R770 are "easier" to handle... maybe you can connect wires through the Pogo contacts without soldering...
Or glue or "needle" or try to create something or your friends have an idea...

Look at the Pics...
I have tried to prepare some solderless ideas... but failed because it is toooooo tiny...
https://forum.xda-developers.com/showpost.php?p=72094300&postcount=111

SM-R732 and SM-R720 have contacts in 1 rope...


I'm missing Pictures of Gear S3 solutions...
Maybe users allready found solderless connection without Factory Pogo JIG...


Best Regards

 

[adfree]

https://forum.xda-developers.com/showpost.php?p=71759486&postcount=30

Here are Service Manuals fro SM-R760 AND SM-R770:
https://forum.xda-developers.com/showpost.php?p=71759486&postcount=30

Here are the "confirmed" Pinout:
https://forum.xda-developers.com/showpost.php?p=71889112&postcount=73

Thanks to se47! I find the way with him.

If you need flash Gear S# from PC you should use:

POGO400 - VCC
POGO401 - none
POGO402 - Data-
POGO403 - Data+
POGO404 - Ground

I mean I could make little Picture for you... similar I've made for my SM-R732 (SM-R720)...

No idea if this would help you...


Best Regards

Edit 1.
Attached empty template... for USB Pinout.
Later if I have time I will paint little bit...

 

[adfree]

https://forum.xda-developers.com/showpost.php?p=72358616&postcount=199

I hope more users have success and can confirm Pinout...

Please also maybe post Photos...

Thanx in advance.

Best Regards

 

[rulaszx98]

Help

Reading the post and looking.... its possible the pinout connecction?? someone can confirm it??

this is my situation:

(My Reply into other posts)
______________________________________________________
Someone Knows how can i connect the R765T to my PC for the download mode (Wired) because i cant enter into the Wireles Download Mode.

Where i can download the firmware for my device (In case it can restored).

Im New on this i recived the device as a gift and it was bricked.

Note: The Device Shows a Red Message and i cant enter only on a Download Mode (Wired?)

The message it shows:
Secure Block: Fail
Press Power Key to shutdown
______________________________________________________

Im new on this i hope you can help me

 

[xe3luf]

Reading the post and looking.... its possible the pinout connecction?? someone can confirm it??

this is my situation:

(My Reply into other posts)
______________________________________________________
Someone Knows how can i connect the R765T to my PC for the download mode (Wired) because i cant enter into the Wireles Download Mode.

Where i can download the firmware for my device (In case it can restored).

Im New on this i recived the device as a gift and it was bricked.

Note: The Device Shows a Red Message and i cant enter only on a Download Mode (Wired?)

The message it shows:
Secure Block: Fail
Press Power Key to shutdown
______________________________________________________

Im new on this i hope you can help me

This one worked for me
https://forum.xda-developers.com/showpost.php?p=72358616&postcount=199
samsung usb drivers for mobile phones
Odin 3.2

I know im late, but i hope it will be helpful for someone!

 

[robdevil]

It is possible to connect without soldering.