• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Bricked Beelink Mini 3 v2 - Any ideas?

Search This thread

Formingus

Senior Member
May 23, 2007
78
11
Fier
Hello, attempting to flash [S905X][FINAL]atvXperience seems to have hard bricked my Beelink Mini MX II III. Flashing failed with an X in front of the android guy, and now the box shows no signs of life. Any ideas for a fix?

Pictures of the board
Same hear, thats will happen when we flash some Andriano ROM and whatever they are called!! Nooobies rom
 

Formingus

Senior Member
May 23, 2007
78
11
Fier
TP? not sure what you mean here, and are you installing using USB Burning Tool? this is the only way to upgrade to android 9, the SD card method wont work as android 9 has significant changes to partitions that the SD card method cant make :)
Actually, i write to you on message and on the forum also and describe mine problem. Probably you didn't get or missed.

Downloaded all your ROMs for s905x and decide to test them.
Flashed few times two ROM's and everything was OK. Flashing via USB Burning Tool
1.[v7.5] (Nexbox) Aidan's ROM [S905X] Nexbox a95x 1GB 2GB+.img
2.[v7.5] (UNIVERSAL) Aidan's ROM [S905X] 1GB 2GB+.img

After i flash [v7.5] (MXQ) Aidan's ROM [S905X] [P212, P214 & P242] MXQ Pro 4K 1GB 2GB+ (720pUI & 210DPI).img
Box won't go anymore in Recovery mode.
USB Burn Tool will not recognize as a device anymore even reinstalled LIB Drivers and tested on 2 PC with Win 7 and Win 10
Via SD Card will not be recognized too - Fashing not start at all possible due missing recovery.
This Box don't have TP. There was no need to press the reset button to be connected when i flash with success, only inserting USB was enough. Now Box will start and hang on Aidans TV Logo and stay there forever. About Hardware its not 100% .

Mine Box is Beelink Mini MXIII 2GB-32GB S905X AnyHelp will be appreciated.
 

Formingus

Senior Member
May 23, 2007
78
11
Fier
This is mine Box from hardware
 

Attachments

  • 20210802_123207.jpg
    20210802_123207.jpg
    275.9 KB · Views: 4
  • 20210802_123220.jpg
    20210802_123220.jpg
    406.8 KB · Views: 4

jucca

Senior Member
Jun 3, 2010
134
9
Split
Try just waiting.
Open USB, load other image which you knows it worked before, press Start immediately in USBT, than plug in your USB A-A and push the recovery button with toothpick. And than just wait. 5-15mins
Works every time with my box. No need to short anything.