Hello People,
I'm in the crap from toes to neck. My brother was playing with my phone and I don't why he tried to install the Clockword mod recovery. He then turned off the phone. So now I cannot turn it on, put it on download mod and start the stock android recovery.
Can somebody help me. It is my work phone. I have all my important contacts & stuff inside.
Thanks in advance.
If your brother installed CWM into your phone, than your phone is rooted, isn't it?
You can download your Stock Rom ( you can find on the phone box your version XWKD1 or XWKF2 )
Stock ROM FROYO 2.2:
For Euro B7510 XWKD1 :
http://hotfile.com/dl/127133994/17d5d98/B7510XWKD1_OXXKD1_XXKC3_bysamsdroid.rar.html
For Euro B7510 XWKF2 :
http://hotfile.com/dl/124407579/8bb1563/B7510_PRO_B7510XWKF2_.zip.html
---------- Post added at 11:17 PM ---------- Previous post was at 10:34 PM ----------
Now you need Odin v4.28 :
http://www.multiupload.com/B12P3BJBE6
Samsung Kies installed in your PC....( I hope that you have already installed the application on the PC)
■Now, after finishing the download you will have to now ensure that you are turning your phone off so that the download mode which is nothing but the safe mode is activated in your phone. After turning Off the phone, you will have to first push the “Q” button to enter in to the download mode which will look like as shown in the below screen shot. If you have successfully entered into the download mode then you will see a green screen which is shown below. Also, additionally note that if the device boots in the normal mode with the home screen then you will have to again switch off the device and retry the process and if despite retrying you are unable to get into download mode then you will have to fix the download mode error for your phone. You can see the download mode screen on how it looks like.
Poza1 ....http://www.4shared.com/photo/zA0HoG80/Poza1.html
■Now, after this you will have to connect the phone to the computer where you have downloaded and extracted the zip file from the above link. Please note that while connecting the USB cable you will have to make sure that the Odin software is open as mentioned and shown above, as soon as you connect the phone to the Odin, the ID COM block will turn yellow after which you will have to enter the files by clicking on the corresponding options as shown below,
Poza2.....[IMG]http://www.4shared.com/photo/k33bdHec/Poza2.html
BOOT – APBOOT_B7510...................md5,
Phone – MODEM_B7510....................md5,
PDA – CODE_B7510..........................md5,
CSC – ....B7510.......CSC...................md5,
■As soon as you feed in the files, you will have to double check the same and then you will have to proceed and click on the “Start” option to start the firmware update process. After clicking on the start, you will see that the firmware will be installed in your phone within a time of not more than 5 minutes.
Poza3......[IMG]http://www.4shared.com/photo/J-0BuaB2/Poza3.html
■Now, you can see that the flashing process is being in process and you will have to make sure that you don’t interrupt the flashing process as this may be fatal for your phone. So, after few minutes of time you will see the Odin screen as shown below,
Poza4......[IMG]http://www.4shared.com/photo/Iyc1MxXQ/Poza4.html
Now, that’s it as soon as you see that the above screen is shown in the Odin, you will have to wait for the home screen to see in the phone and there you go, you have now successfully instal.
