bricked tornado

supervaags

Member
Nov 4, 2007
22
0
0
hey all,

i have been verry stupid and flashed my phone with wm6 for the hurricane..

now it wont even start up and i am already searching for another phone but what i would like to ask.. is it really over now? is there nothing i can do?

i know its verry stupid.. i already updated it to wm6 a few times and it worked exallend.. but i had a rush and din't take a good look.. :mad::(

thank you
 

SAXON13

Member
Mar 24, 2008
29
0
0
hey all,

i have been verry stupid and flashed my phone with wm6 for the hurricane..

now it wont even start up and i am already searching for another phone but what i would like to ask.. is it really over now? is there nothing i can do?

i know its verry stupid.. i already updated it to wm6 a few times and it worked exallend.. but i had a rush and din't take a good look.. :mad::(

thank you
What kind of ROM wm6 for the hurricane are you flashed? If it not containts IPL & SPL for hurricane it is not over now.
Try to downgrade to the original firmware for you platform (TORNADO)
Charge battarey (if phone dont want charge, do it externaly) and enter bootloader by pressing camera button & connect USB
 

supervaags

Member
Nov 4, 2007
22
0
0
thanks for your respons,

which rom it was i dont really know exactly, what i do know was that it go far to quickley

i can not turn the phone on and even with an external charger it wont work.. i already tryed to access the bootloader but it wont work..

a few minutes after i bricked it i had a white screen.. but that was just for one time..
 

SAXON13

Member
Mar 24, 2008
29
0
0
thanks for your respons,

which rom it was i dont really know exactly, what i do know was that it go far to quickley

i can not turn the phone on and even with an external charger it wont work.. i already tryed to access the bootloader but it wont work..

a few minutes after i bricked it i had a white screen.. but that was just for one time..
Try to charge battarey with external charger (not in phone). Or with orriginal charger, connect it and leave at 6-12 hours.
And when you try to turn on phone ith it have red blinking for a second?
May be that you reflash incorrect botloader (IPL & SPL). I know method how to repair it, but ferst of all check that your battarey ith full charge...
 

supervaags

Member
Nov 4, 2007
22
0
0
yes exactly, when i have the baterry in the device and i want to turn it on, i flashes verry weak for a moment..
and when i remove the battery and put it into my original charger, it flashes strong for a second when i put the connector in.

so i am correct, that means my battery is empty and i have to find a way to charge it external..

i already have an offer for an another phone, do you think i can repair this one?
and which method do i have to use?

thanks in advance

edit:
with some wires and an another adapter i figered a way out to charge the baterry external..
it would be great if you could help me.
 
Last edited:

SAXON13

Member
Mar 24, 2008
29
0
0
yes exactly, when i have the baterry in the device and i want to turn it on, i flashes verry weak for a moment..
and when i remove the battery and put it into my original charger, it flashes strong for a second when i put the connector in.

so i am correct, that means my battery is empty and i have to find a way to charge it external..

i already have an offer for an another phone, do you think i can repair this one?
and which method do i have to use?

thanks in advance

edit:
with some wires and an another adapter i figered a way out to charge the baterry external..
it would be great if you could help me.
Chek the voltage of baterry ( it must be near 3.7-4.3 v). The easy external charge you can make taking the charger with same V & Am parameters, choping connector and take the choped wires to baterry in right dirrection "+" to "+" & "-" to "-", but this is dangerous way soo if you dont uderstand how to doo this, dont doo it.
But it seems, as when you try to connect orriginal charger there are only blincking for a second and nothing else, that you destroy the bootloader on your phone...

And is this blincking red or orange flash ?
 
Last edited:

supervaags

Member
Nov 4, 2007
22
0
0
no i realy know what i am doing and i let it charge for a couple of hours but there is no result..
it still doesn't do anything:( and i know the battery is full now.

when i want to turn it on, it flashes red, so if the bootloader is destroyed that means that he not can be repaired is it?

well.. i already thougd that it was over but now i now it for sure..

thanks for youre help:)
 

SAXON13

Member
Mar 24, 2008
29
0
0
no i realy know what i am doing and i let it charge for a couple of hours but there is no result..
it still doesn't do anything:( and i know the battery is full now.

when i want to turn it on, it flashes red, so if the bootloader is destroyed that means that he not can be repaired is it?

well.. i already thougd that it was over but now i now it for sure..

thanks for youre help:)
I can repair it ( I repaired many devices with same problem), but i am from ukraine, soo i dont know is it possible to send it to me for repeairing, or i can buy it from you for experements in repairing...
 

supervaags

Member
Nov 4, 2007
22
0
0
i live in holland so that is a bit to far for driving indeed:D

well, ofcourse i can sent it to you but what does that costs? transport, repairing etc..

or you may buy mines for experimenting and than i buy an another one..
how much would you give for my 8300?

is repairing so difficult that i cant do it my own? or do i need special tools or something?
 

SAXON13

Member
Mar 24, 2008
29
0
0
i live in holland so that is a bit to far for driving indeed:D

well, ofcourse i can sent it to you but what does that costs? transport, repairing etc..

or you may buy mines for experimenting and than i buy an another one..
how much would you give for my 8300?

is repairing so difficult that i cant do it my own? or do i need special tools or something?
I dont know about shipping cost from you country(you must find out on your post services), for repairing i ask near 20 EUR. And ofcourse shipping by your costs in both sides.
If you want to sell it for me i can give you near 30-35 EUR (it is dependent from accesories and outward appearance).And I pay shipping costs.

Yes for repairing you need special tools (special cable etc.) and wide experience...
 

supervaags

Member
Nov 4, 2007
22
0
0
oke then i want to sell it to you that makes it a lot easyer, because special tools and experience is not really what i got;)

i am going to buy a 8310 so i want to keep some accesiores like car holder and stuff.. i can offer you the phone and battery and charger..

so that will be 35 + shipping costs? i will look that up, i dont think that is verry much..

i will sent you a message with my bank acount number and then i would like to know youre adress so i can sent it to you..
 

SAXON13

Member
Mar 24, 2008
29
0
0
oke then i want to sell it to you that makes it a lot easyer, because special tools and experience is not really what i got;)

i am going to buy a 8310 so i want to keep some accesiores like car holder and stuff.. i can offer you the phone and battery and charger..

so that will be 35 + shipping costs? i will look that up, i dont think that is verry much..

i will sent you a message with my bank acount number and then i would like to know youre adress so i can sent it to you..
Ok 35 EUr + shipping ( tell me how much it cost from your country). I dont need car holder, only base assemblage (battery, charger, USB-cable, package box, and some document)
Next wright me to PM or on my E-mail:[email protected]
 

Nware

New member
Jul 25, 2008
4
0
0
Hi,
Now I have the same problem.
I flash my phone (tornado) by guide http://karhoe.net/content/view/35/1/ (I think that is wrong guide for my phone-windows )
I had WM6.1 and I run Patched_RUU and was 100% -> "Once you are done, your phone will reboot, then turn it off."
My phone doesn't want restart (all the time black screen) .
Now doesn't work bootloader and the phone doesn't want turn on.
What can I do to get it to work?
Please help :(
 

SAXON13

Member
Mar 24, 2008
29
0
0
Hi,
Now I have the same problem.
I flash my phone (tornado) by guide http://karhoe.net/content/view/35/1/ (I think that is wrong guide for my phone-windows )
I had WM6.1 and I run Patched_RUU and was 100% -> "Once you are done, your phone will reboot, then turn it off."
My phone doesn't want restart (all the time black screen) .
Now doesn't work bootloader and the phone doesn't want turn on.
What can I do to get it to work?
Please help :(
This guide right for your phone( i meen the procedure). But if you took the ROM from this guide, you kill bootloader in your phone, becouse (maybe) it including the IPL & SPL for TYPHOON. Wright mee to PM...
And give mee a link dirrectly to the ROM that you flashing...
 

supervaags

Member
Nov 4, 2007
22
0
0
Hi,
Now I have the same problem.
I flash my phone (tornado) by guide http://karhoe.net/content/view/35/1/ (I think that is wrong guide for my phone-windows )
I had WM6.1 and I run Patched_RUU and was 100% -> "Once you are done, your phone will reboot, then turn it off."
My phone doesn't want restart (all the time black screen) .
Now doesn't work bootloader and the phone doesn't want turn on.
What can I do to get it to work?
Please help :(
do also only see a light flasing wenn you want to turn the phone on?
 

Nware

New member
Jul 25, 2008
4
0
0

SAXON13

Member
Mar 24, 2008
29
0
0
Yes, i see only once red led flashing.

SAXON13, this guide is for my phone but this is guide how upgrade windows from WM5 to WM6. I had WM 6.1 and I just instal new SPL ( this - http://rapidshare.com/files/54057779/IU_SPL_PatchedRUU.zip ).
After process my phone should will reboot, but unless since then he had black screen and i can't turn it on.
This is for HTC Typhoon/Feelar/Amadeus not for Tornado, so your phone is dead, you flash bootloader from other phone. Wright me to PM