• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[BSKO] Galaxy S10 (SM-G97xF) OFFICIAL OneUI2/10 (NO ROOT/CUSTOM ROM TALK!!!)

Status
Not open for further replies.
Search This thread

henklbr

Senior Member
Feb 20, 2009
6,126
6,738
Netherlands
www.sammobile.com
vSWSrb.png


This thread is for the INTERNATIONAL S10e / S10 / S10+, SM-G97xF, only!!!

Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )

If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!

Samsung is starting a Beta-program Android 10/OneUI 2 for the S10-series. In this thread, we'll post the UPDATE.ZIP files (when available).

REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!

The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the G97xFXXS3ASII build! (Radio/CP & CSC must be on ASIE) -> Link can be found HERE

The UPDATE.ZIP can be installed on devices with the following CSC's:

SM-G975F OXM multi CSC ( ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )

single : ( BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XFV XNZ XSA )

How to install the UPDATE.ZIP to your S10 (by @madvinegar ); YouTube-video by SStech




ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip

The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.

SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.

This will not trip KNOX if done by the method i told

NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...

S10+:

Beta1 (14 Oct) ASII -> ZSJ8: G975F_ASII_ZSJ8

Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161

Beta1 (24 Oct) ASIG -> ZSJF (You must be on the Indian ASIG-build (AP/BL: ASIG, CP/CSC: ASIE)): G975F_ASIG_ZSJF

Beta2 (25 Oct) ZSJ8 -> ZSJF: G975F_ZSJ8_ZSJF

Needs to be installed with the "SD-Card method"!

EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G975F_ZSJF_ZSJL

Beta3 (07 Nov) ZSJL -> ZSK3: G975F_ZSJL_ZSK3

Beta4 (15 Nov) ZSK3 -> ZSK9: G975F_ZSK3_ZSK9

Beta5 (18 Nov) ZSK9 -> ZSKF: G975F_ZSK9_ZSKF (thanks to @Robert Smali)

Beta6 (21 Nov) ZSKF -> ZSKJ: G975F_ZSKF_ZSKJ

Beta7 (25 Nov) ZSKJ -> ZSKL: G975F_ZSKJ_ZSKL (Thanks to SamMobile)

Stable/Final (28 Nov) ZSKL -> BSKO: G975F_ZSKL_BSKO

S10:

Beta1 (14 Oct) ASII -> ZSJ8: G973F_ASII_ZSJ8

Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161

Beta2 (25 Oct) ZSJ8 -> ZSJF: G973F_ZSJ8_ZSJF

Needs to be installed with the "SD-Card method"!

EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G973F_ZSJF_ZSJL

Beta3 (07 Nov) ZSJL -> ZSK3: G973F_ZSJL_ZSK3

Beta4 (15 Nov) ZSK3 -> ZSK9: G973F_ZSK3_ZSK9 (thanks to @runtime_Err0r)

Beta5 (18 Nov) ZSK9 -> ZSKF: G973F_ZSK9_ZSKF (thanks to @runtime_Err0r)

Beta6 (21 Nov) ZSKF -> ZSKJ: G973F_ZSKF_ZSKJ

Beta7 (25 Nov) ZSKJ -> ZSKL: G973F_ZSKJ_ZSKL (thanks to @runtime_Err0r)

Stable/Final (28 Nov) ZSKL -> BSKO: G973F_ZSKL_BSKO

S10e:

Beta1 (14 Oct) ASII -> ZSJ8: G970F_ASII_ZSJ8

Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161

Beta2 (25 Oct) ZSJ8 -> ZSJF: G970F_ZSJ8_ZSJF

Needs to be installed with the "SD-Card method"!

EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G970F_ZSJF_ZSJL

Beta3 (07 Nov) ZSJL -> ZSK3: G970F_ZSJL_ZSK3

Beta4 (15 Nov) ZSK3 -> ZSK9: G970F_ZSK3_ZSK9

Beta5 (18 Nov) ZSK9 -> ZSKF: G970F_ZSK9_ZSKF (thanks to @Robert Smali)

Beta6 (21 Nov) ZSKF -> ZSKJ: G970F_ZSKF_ZSKJ

Beta7 (25 Nov) ZSKJ -> ZSKL: G970F_ZSKJ_ZSKL (Thanks to SamMobile)

Stable/Final (28 Nov) ZSKL -> BSKO: G970F_ZSKL_BSKO

RENAME THE FILE TO update.zip

NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Bixby - Power)

If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... ;) )

UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!

If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!

If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!
 
Last edited:

henklbr

Senior Member
Feb 20, 2009
6,126
6,738
Netherlands
www.sammobile.com
  • Like
Reactions: Lodix

corsicanu

Recognized Developer
May 25, 2012
1,955
13,214
Bucuresti
We saw this too at SamMobile; we asked PhoneArena for more info: NO reaction at all!
No-one at our office has the possibility to install the update yet, neither are people from the German Samsung community!
I'm aware of the fact they are the only one to come with this and 0 useful information attached, but the "Update: We reached out to Samsung and the company confirmed to us that the beta program has indeed been delayed. No new date has been provided yet." is doubtful too imho since this was posted on Samsung forums, furtherly thinking at this picture being posted more recently than the korean delay announcement.
Don't get me wrong, i'm not trying to start a riot or something, i just still think and hope they will deliver beta today at some point in Germany.
All the best!
 

henklbr

Senior Member
Feb 20, 2009
6,126
6,738
Netherlands
www.sammobile.com
I'm aware of the fact they are the only one to come with this and 0 useful information attached, but the "Update: We reached out to Samsung and the company confirmed to us that the beta program has indeed been delayed. No new date has been provided yet." is doubtful too imho since this was posted on Samsung forums, furtherly thinking at this picture being posted more recently than the korean delay announcement.
Don't get me wrong, i'm not trying to start a riot or something, i just still think and hope they will deliver beta today at some point in Germany.
All the best!

I'm afraid the Beta has indeed been delayed, because we (SamMobile) got the news from Samsung Korea... :(
 

henklbr

Senior Member
Feb 20, 2009
6,126
6,738
Netherlands
www.sammobile.com
Hi OP. Have you captured the update URL? If you have, Can you please share the URL so other people can also try to pull the update!

Read the 2nd Paragraph of message #1:

Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. @CyberJ0hn )

If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!

There is NO URL yet! When it's available, you can find it in this thread (maybe)...
 

Skorm92

Senior Member
Mar 16, 2013
55
52
Sprang-Capelle
I don't really get your reasoning on creating this thread.
You create a full readme on how to update and which devices but without the actual download and then you refrain people asking for updates. This is basically calling these questions upon yourself.

Even worse, you act like some community manager that has to handle thousands of requests day by day by your impolite responses. What did you actually expect what would happen?

Nevertheless, nice guide. Can't wait till beta releases for our devices! ;)
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 95
    vSWSrb.png


    This thread is for the INTERNATIONAL S10e / S10 / S10+, SM-G97xF, only!!!

    Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
    Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )

    If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!

    Samsung is starting a Beta-program Android 10/OneUI 2 for the S10-series. In this thread, we'll post the UPDATE.ZIP files (when available).

    REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!

    The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the G97xFXXS3ASII build! (Radio/CP & CSC must be on ASIE) -> Link can be found HERE

    The UPDATE.ZIP can be installed on devices with the following CSC's:

    SM-G975F OXM multi CSC ( ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )

    single : ( BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XFV XNZ XSA )

    How to install the UPDATE.ZIP to your S10 (by @madvinegar ); YouTube-video by SStech




    ADB-method:
    1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
    2. Extract them on your desktop.
    3. Inside the extracted folder put the update.zip
    4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
    5. Shutdown the phone.
    6. Holding power+bixby+volume up buttons, enter into recovery mode.
    7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
    8. Connect the phone to the PC using original samsung USB cable.
    9. In the command prompt run the following command:
    ./adb devices
    10. Wait to see that the daemon has started and that your device is found.
    11. If you device is found, run the following command:
    ./adb sideload update.zip

    The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
    Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.

    SD-card method:
    1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
    2. Copy it to the root directory of your SDcard.
    3. Shut down your phone.
    4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
    5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
    6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
    7. Update will start. Leave it till it completes. It will take some time.
    8. Phone will reboot by itself and load android.

    This will not trip KNOX if done by the method i told

    NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
    You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...

    S10+:

    Beta1 (14 Oct) ASII -> ZSJ8: G975F_ASII_ZSJ8

    Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161

    Beta1 (24 Oct) ASIG -> ZSJF (You must be on the Indian ASIG-build (AP/BL: ASIG, CP/CSC: ASIE)): G975F_ASIG_ZSJF

    Beta2 (25 Oct) ZSJ8 -> ZSJF: G975F_ZSJ8_ZSJF

    Needs to be installed with the "SD-Card method"!

    EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G975F_ZSJF_ZSJL

    Beta3 (07 Nov) ZSJL -> ZSK3: G975F_ZSJL_ZSK3

    Beta4 (15 Nov) ZSK3 -> ZSK9: G975F_ZSK3_ZSK9

    Beta5 (18 Nov) ZSK9 -> ZSKF: G975F_ZSK9_ZSKF (thanks to @Robert Smali)

    Beta6 (21 Nov) ZSKF -> ZSKJ: G975F_ZSKF_ZSKJ

    Beta7 (25 Nov) ZSKJ -> ZSKL: G975F_ZSKJ_ZSKL (Thanks to SamMobile)

    Stable/Final (28 Nov) ZSKL -> BSKO: G975F_ZSKL_BSKO

    S10:

    Beta1 (14 Oct) ASII -> ZSJ8: G973F_ASII_ZSJ8

    Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161

    Beta2 (25 Oct) ZSJ8 -> ZSJF: G973F_ZSJ8_ZSJF

    Needs to be installed with the "SD-Card method"!

    EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G973F_ZSJF_ZSJL

    Beta3 (07 Nov) ZSJL -> ZSK3: G973F_ZSJL_ZSK3

    Beta4 (15 Nov) ZSK3 -> ZSK9: G973F_ZSK3_ZSK9 (thanks to @runtime_Err0r)

    Beta5 (18 Nov) ZSK9 -> ZSKF: G973F_ZSK9_ZSKF (thanks to @runtime_Err0r)

    Beta6 (21 Nov) ZSKF -> ZSKJ: G973F_ZSKF_ZSKJ

    Beta7 (25 Nov) ZSKJ -> ZSKL: G973F_ZSKJ_ZSKL (thanks to @runtime_Err0r)

    Stable/Final (28 Nov) ZSKL -> BSKO: G973F_ZSKL_BSKO

    S10e:

    Beta1 (14 Oct) ASII -> ZSJ8: G970F_ASII_ZSJ8

    Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161

    Beta2 (25 Oct) ZSJ8 -> ZSJF: G970F_ZSJ8_ZSJF

    Needs to be installed with the "SD-Card method"!

    EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G970F_ZSJF_ZSJL

    Beta3 (07 Nov) ZSJL -> ZSK3: G970F_ZSJL_ZSK3

    Beta4 (15 Nov) ZSK3 -> ZSK9: G970F_ZSK3_ZSK9

    Beta5 (18 Nov) ZSK9 -> ZSKF: G970F_ZSK9_ZSKF (thanks to @Robert Smali)

    Beta6 (21 Nov) ZSKF -> ZSKJ: G970F_ZSKF_ZSKJ

    Beta7 (25 Nov) ZSKJ -> ZSKL: G970F_ZSKJ_ZSKL (Thanks to SamMobile)

    Stable/Final (28 Nov) ZSKL -> BSKO: G970F_ZSKL_BSKO

    RENAME THE FILE TO update.zip

    NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Bixby - Power)

    If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... ;) )

    UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!

    If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!

    If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!
    36
    G97xFXXU3ZSK9 Beta4

    BJA3n1.jpg


    S10+: Beta4 (15 Nov) ZSK3 -> ZSK9: G975F_ZSK3_ZSK9

    S10: Beta4 (15 Nov) ZSK3 -> ZSK9: G973F_ZSK3_ZSK9 (thanks to @runtime_Err0r)

    S10e: Beta4 (15 Nov) ZSK3 -> ZSK9: G970F_ZSK3_ZSK9

    RENAME THE FILE TO update.zip; update via SD-CARD method!
    21
    Oh hai (waves hand),

    Posts in this thread are beyond ridiculous and are getting close to breaking the rules. You honestly sound like my kids. I don't tell my kids any of my plans for having a fun time with them because if the plans fall through or are delayed, then the kids get annoying. For efficiency, it's obvious that henklbr created the thread to have it ready so that when Samsung released whatever it is you all are begging so hard for, he could quickly post it. Then it got delayed by Samsung.

    Yes, he did post early (premature posting, I think there's a pill for that), but his only fault was trusting that Samsung would release on time. As someone else said, he's been good at doing this for sometime and so let's not treat him like some noob. He's doing us a favor for goodness sakes. As the cliche goes, don't bite the hand that feeds you.

    Asking for updates and ETAs is bad form as it implies that you are the boss and the OP works for you. Plus, he asked you not to do that in the OP. So, here is my kind suggestion: patiently wait as I'm sure he will release as soon as possible. If you can't do that without posting asking for ETAs or being rude to the OP, then move on. I'm subscribing to this thread to make sure you all follow my advise.

    @henklbr if you want me to close the thread until you're ready to release the update, let me know and I can.

    Until then, in the words of Bill and Ted, be excellent to each other.
    XBBrdKf.gif


    Please PM me if you have any questions or concerns,
    coal686
    Senior Moderator
    19
    G97*FXXU3BSKO Android 10/OneUI 2.0 Stable/Final

    zsthvK.jpg
    HZGMTL.jpg


    S10+:

    Stable/Final (28 Nov) ZSKL -> BSKO: G975F_ZSKL_BSKO

    S10:

    Stable/Final (28 Nov) ZSKL -> BSKO: G973F_ZSKL_BSKO

    S10e:

    Stable/Final (28 Nov) ZSKL -> BSKO: G970F_ZSKL_BSKO

    Update via SD-Card method!

    RENAME THE FILE TO update.zip

    NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Bixby - Power)

    If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... ;) )

    UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!

    If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!

    If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!
    19
    Close thread

    Beta users...

    The stable build of Android 10 / OneUI 2.0 has been released today in Germany.

    As soon as the Odin-file is available, I'll request the Mod's to close this thread.

    The link to the Odin-file can be found in the S10+-thread from me (sorry S10/S10e users...)

    I hope, you'll enjoy Android 10 on your device :)