[BSL7] Galaxy Note10+ (SM-N975F) OFFICIAL OneUI2/10 beta (NO ROOT/CUSTOM ROM TALK!!!)

Status
Not open for further replies.
Search This thread

Amjad.AbdulGhani

Senior Member
Oct 13, 2016
341
120
Samsung Galaxy S21 FE
Updated to the stable via sd card successfully yesterday.. And i gave it so far for testing..
I would say that the biggest improvement is in the standby or deep sleep battery consumption.. Its superb finally..
I have the beta installed from beta 1 till the stable over the time, updating one by one once each released and simply cleaning cash partition only.. But i had a clean factory reset only after beta 1..
Thanks to the OP for his efforts from the beginning of the beta program.. Now we move to the stable version thread for the future updates..
 
  • Like
Reactions: rmn.br

teohjo

Member
Jan 26, 2005
43
1
vju3VH.jpg


This thread is for the INTERNATIONAL Note10+, SM-N975F, only!!!

Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )

If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!

Samsung is starting a Beta-program Android 10/OneUI 2 for the Note10-series. In this thread, we'll post the UPDATE.ZIP files (when available).

REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!

The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the N975FXXU1ASJ2 build! (Radio/CP & CSC must be on: ASIC (Radio/CP) & ASJ2 (CSC))

The UPDATE.ZIP can be installed on devices with the following CSC's:

SM-N975F OXM multi-CSC:

ACR AFG AFR ARO ATO AUT BGL BNG BTC BTU CAC CAM CAU CHO COO CPW DBT DKR DOO ECT EGY EON EUR FWD GLB GTO ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MXO MYM NEE NPL NZC OPS ORX PAK PEO PHE PHN ROM SEB SEE SEK SER SIN SIO SKZ SLK SMA SMP STH TEL THL TNZ TPA TPH TTT TUN TUR VAU VNZ XEF XEH XEO XEU XEZ XFA XFE XFV XME XFG XNZ XSA XSP XTC XXV

How to install the UPDATE.ZIP to your Note10+ (by @madvinegar ); YouTube-video by SStech




ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip

The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.

SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.

This will not trip KNOX if done by the method i told

NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...

Note10+:

Beta1 (28 Oct) ASJ2 -> ZSJF : N975F_ASJ2_ZSJF
You need to be at this build: AP : N975FXXS1ASJ2 - CP : N975FXXS1ASIC - CSC : N975FOXM1ASJ2

Beta1 (08 Nov) ASJG -> ZSK4 : N975F_ASJG_ZSK4 (thanks to @dr.ketan)
You need to be at this build: AP : N975FXXS1ASJG - CP : N975FXXS1ASJ2 - CSC : N975FOXM1ASJ2

Beta1 (14 Nov) ASJM -> ZSK4 : N975F_ASJM_ZSK4 (thanks to SamMobile)
You need to be at this build: AP : N975FXXS1ASJM - CP : N975FXXS1ASJ4 - CSC : N975FOXM1ASJC

Beta2 (18 Nov) ZSK4 -> ZSK8 : N975F_ZSK4_ZSK8 (thanks to @dr.ketan)

Beta2 (18 Nov) ZSJF -> ZSK8 : N975F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!

Beta3 (29 Nov) ZSK8 -> ZSKN : N975F_ZSK8_ZSKN (Thanks to GalaxyClub)

Beta4 (06 Dec) ZSKN -> ZSL4 : N975F_ZSKN_ZSL4 (Thanks to GalaxyClub)

Beta5 (11 Dec) ZSL4 -> ZSL7 : N975F_ZSL4_ZSL7 (Thanks to SamMobile)

Stable (13 Dec) ZSL7 -> BSL7 : N975F_ZSL7_BSL7 (Thanks to Cyber John )

Note10:

Beta1 (28 Oct) ASJ2 -> ZSJF : N970F_ASJ2_ZSJF

Beta2 (18 Nov) ZSJF -> ZSK8 : N970F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!

Beta3 (29 Nov) ZSK8 -> ZSKN : N970F_ZSJ8_ZSKN (Thanks to SamMobile)

Beta4 (06 Dec) ZSKN -> ZSL4 : N970F_ZSKN_ZSL4 (Thanks to SamMobile)

Beta5 (11 Dec) ZSL4 -> ZSL7 : N970F_ZSL4_ZSL7 (Thanks to Cyber John )

Stable (13 Dec) ZSL7 -> BSL7 : N970F_ZSL7_BSL7 (Thanks to Cyber John )

RENAME THE FILE TO update.zip

NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Power)

If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... ;) )

UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!

If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!

If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!

How can i flash if my Note 10 already on 1 Nov security patch? The Beta1 is on 28 Oct.
 

zava1974

Senior Member
May 17, 2009
54
12
Belgrade
Once again if mod's allowed that kind of question ........

One big question for users of ALL variants N10 and N10+ on any Android system 9 or 10, beta 1,2,3 .........
Does proximity sensor works like should be or like on S8 and S9 all variants?
- When you cover sensor, display (AOD) turn off display completely after ~ 45sec
- Option "accidental touch protection" works like should be (pocket mode)
Any Note 10 phone ?
Many thanks in advance !
Every answer is very important to me !
 

nkos719

Senior Member
May 1, 2010
237
25
Dortmund
Once again if mod's allowed that kind of question ........

One big question for users of ALL variants N10 and N10+ on any Android system 9 or 10, beta 1,2,3 .........
Does proximity sensor works like should be or like on S8 and S9 all variants?
- When you cover sensor, display (AOD) turn off display completely after ~ 45sec
- Option "accidental touch protection" works like should be (pocket mode)
Any Note 10 phone ?
Many thanks in advance !
Every answer is very important to me !
I was at the beta 5 till yesterday and didn't have any problems with it except the bluetooth A2DP that got fixed 2 betas ago. The sensor was working fine (on note 10 plus 256gb)
 

readymarc

Senior Member
Dec 30, 2016
197
53
Do you guys keep your device on WQHD or FHD. What kind of screen on time you guys are getting. With this stable build I know its kind of hard to see actual screen on time after a full charge. Its now calculating screen on for that particular day.
 

thuglife

Senior Member
Oct 21, 2006
112
21
Was actually anyone here able to go from ZSJF to ZSK8 on a Note 10 N970F? No mather which way I try the phone just doesnt want to update to ZSK8.
 

Sprov

Senior Member
Oct 12, 2015
296
90
27
Bologna
Updated to the stable via sd card successfully yesterday.. And i gave it so far for testing..
I would say that the biggest improvement is in the standby or deep sleep battery consumption.. Its superb finally..
I have the beta installed from beta 1 till the stable over the time, updating one by one once each released and simply cleaning cash partition only.. But i had a clean factory reset only after beta 1..
Thanks to the OP for his efforts from the beginning of the beta program.. Now we move to the stable version thread for the future updates..

Despite what the OP says, there are under the hood changes from Beta 5 to this stable build: my standby time has improved a lot too.
 

henklbr

Senior Member
Feb 20, 2009
6,126
6,749
Netherlands
www.sammobile.com
I am at:
AP: N975FXXS1ASKB
CP: N975FXXU1ASJ4
CSC: N975FOXM1ASJC
Model: SMN-975F/DS
Fast questions:
1. Will i be able to install this beta version? i mean with an order,first the v1,then v2,v3,v4,v5 and at the end finish with the stable version.
2. With which update.zip should i start and which one will be the last one?
3. Will i still be able to receive OTA firmware updates after doing that?

thanks in advance guys!

My advice?

Wait a few days, and you'll be surprised... ;)
 
  • Like
Reactions: carlitobahsoun

zava1974

Senior Member
May 17, 2009
54
12
Belgrade
I was at the beta 5 till yesterday and didn't have any problems with it except the bluetooth A2DP that got fixed 2 betas ago. The sensor was working fine (on note 10 plus 256gb)
Thank you for your answer!
When you set AOD as "always show" and cover sensor with something, does AOD and screen completely go off after ~45 sec ? :confused:
 

jaylence

Senior Member
Jun 24, 2012
753
734
Santo Tomas
Hmm . . . . it's not working like should be, like on S8 or S9 series ...:mad::mad::mad:
I think it's working as intended.
When you enable "show always" it MUST be displayed always no matter what you do with the sensors.
Besides, "45s" isn't even on the settings.

Don't you think S8 and S9 were the ones not working "as they should be"?

Sent from my SM-N975F using Tapatalk
 

zava1974

Senior Member
May 17, 2009
54
12
Belgrade
I think it's working as intended.
When you enable "show always" it MUST be displayed always no matter what you do with the sensors.
Besides, "45s" isn't even on the settings.

Don't you think S8 and S9 were the ones not working "as they should be"?

Sent from my SM-N975F using Tapatalk

But what's the point of AOD in pocket/bag? . . . . spend some battery energy?
And it's not only on S8 and S9 series . . . . Samsung A series, Note8 and Note 9, Huawei, LG and many others have "AOD" that function properly.
On my wife S8+ is the same option enabled "show always" but when you cover sensor display goes off after about 45 or 50 sec. that's the point.
 
Last edited:
  • Like
Reactions: lightdelegate

jaylence

Senior Member
Jun 24, 2012
753
734
Santo Tomas
But what the point of AOD in pocket/bag? . . . . spend some battery energy?

And it's not only on S8 and S9 series . . . . Samsung A series, Note8 and Note 9, Huawei, LG and many others have "AOD" that function properly.

On my wife S8+ is the same option enabled "show always" but when you cover sensor display goes off after about 45 or 50 sec. that's the point.

I see. For the mean time, Enable "tap to show" instead of "show always" in AOD settings.
Then enable "accidental touch protection".


That's the closest setup for now.


Edit:
I've just confirmed, my Note9 running Android 10 beta has the function like you described.


Sent from my SM-N975F using Tapatalk
 
Last edited:
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 41
    vju3VH.jpg


    This thread is for the INTERNATIONAL Note10+, SM-N975F, only!!!

    Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
    Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )

    If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!

    Samsung is starting a Beta-program Android 10/OneUI 2 for the Note10-series. In this thread, we'll post the UPDATE.ZIP files (when available).

    REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!

    The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the N975FXXU1ASJ2 build! (Radio/CP & CSC must be on: ASIC (Radio/CP) & ASJ2 (CSC))

    The UPDATE.ZIP can be installed on devices with the following CSC's:

    SM-N975F OXM multi-CSC:

    ACR AFG AFR ARO ATO AUT BGL BNG BTC BTU CAC CAM CAU CHO COO CPW DBT DKR DOO ECT EGY EON EUR FWD GLB GTO ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MXO MYM NEE NPL NZC OPS ORX PAK PEO PHE PHN ROM SEB SEE SEK SER SIN SIO SKZ SLK SMA SMP STH TEL THL TNZ TPA TPH TTT TUN TUR VAU VNZ XEF XEH XEO XEU XEZ XFA XFE XFV XME XFG XNZ XSA XSP XTC XXV

    How to install the UPDATE.ZIP to your Note10+ (by @madvinegar ); YouTube-video by SStech




    ADB-method:
    1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
    2. Extract them on your desktop.
    3. Inside the extracted folder put the update.zip
    4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
    5. Shutdown the phone.
    6. Holding power+bixby+volume up buttons, enter into recovery mode.
    7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
    8. Connect the phone to the PC using original samsung USB cable.
    9. In the command prompt run the following command:
    ./adb devices
    10. Wait to see that the daemon has started and that your device is found.
    11. If you device is found, run the following command:
    ./adb sideload update.zip

    The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
    Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.

    SD-card method:
    1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
    2. Copy it to the root directory of your SDcard.
    3. Shut down your phone.
    4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
    5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
    6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
    7. Update will start. Leave it till it completes. It will take some time.
    8. Phone will reboot by itself and load android.

    This will not trip KNOX if done by the method i told

    NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
    You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...

    Note10+:

    Beta1 (28 Oct) ASJ2 -> ZSJF : N975F_ASJ2_ZSJF
    You need to be at this build: AP : N975FXXS1ASJ2 - CP : N975FXXS1ASIC - CSC : N975FOXM1ASJ2

    Beta1 (08 Nov) ASJG -> ZSK4 : N975F_ASJG_ZSK4 (thanks to @dr.ketan)
    You need to be at this build: AP : N975FXXS1ASJG - CP : N975FXXS1ASJ2 - CSC : N975FOXM1ASJ2

    Beta1 (14 Nov) ASJM -> ZSK4 : N975F_ASJM_ZSK4 (thanks to SamMobile)
    You need to be at this build: AP : N975FXXS1ASJM - CP : N975FXXS1ASJ4 - CSC : N975FOXM1ASJC

    Beta2 (18 Nov) ZSK4 -> ZSK8 : N975F_ZSK4_ZSK8 (thanks to @dr.ketan)

    Beta2 (18 Nov) ZSJF -> ZSK8 : N975F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!

    Beta3 (29 Nov) ZSK8 -> ZSKN : N975F_ZSK8_ZSKN (Thanks to GalaxyClub)

    Beta4 (06 Dec) ZSKN -> ZSL4 : N975F_ZSKN_ZSL4 (Thanks to GalaxyClub)

    Beta5 (11 Dec) ZSL4 -> ZSL7 : N975F_ZSL4_ZSL7 (Thanks to SamMobile)

    Stable (13 Dec) ZSL7 -> BSL7 : N975F_ZSL7_BSL7 (Thanks to Cyber John )

    Note10:

    Beta1 (28 Oct) ASJ2 -> ZSJF : N970F_ASJ2_ZSJF

    Beta2 (18 Nov) ZSJF -> ZSK8 : N970F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!

    Beta3 (29 Nov) ZSK8 -> ZSKN : N970F_ZSJ8_ZSKN (Thanks to SamMobile)

    Beta4 (06 Dec) ZSKN -> ZSL4 : N970F_ZSKN_ZSL4 (Thanks to SamMobile)

    Beta5 (11 Dec) ZSL4 -> ZSL7 : N970F_ZSL4_ZSL7 (Thanks to Cyber John )

    Stable (13 Dec) ZSL7 -> BSL7 : N970F_ZSL7_BSL7 (Thanks to Cyber John )

    RENAME THE FILE TO update.zip

    NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Power)

    If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... ;) )

    UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!

    If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!

    If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!
    19
    N97*FXXU1ZSJF OneUI 2.0 / Android 10 Beta1

    Note10+:

    Beta1 (28 Oct) ASJ2 -> ZSJF : N975F_ASJ2_ZSJF

    Note10:

    Beta1 (28 Oct) ASJ2 -> ZSJF : N970F_ASJ2_ZSJF

    RENAME THE FILE TO update.zip

    NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Power)
    16
    N97*FXXU1ZSL4 OneUI 2.0 / Android 10 Beta4

    xnz7LF.jpg
    jpf78u.jpg
    FxRiVR.jpg
    CgMW77.jpg


    In addition to above mentioned changes, the Camera "Firmware" & "App" has been updated too...

    Note10+:

    Beta4 (06 Dec) ZSKN -> ZSL4 : N975F_ZSKN_ZSL4 (Thanks to GalaxyClub)

    Note10:

    Beta4 (06 Dec) ZSJN -> ZSL4 : N970F_ZSKN_ZSL4 (Thanks to SamMobile)

    RENAME THE FILE TO update.zip

    NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Power)

    If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... ;) )

    UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!

    If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!

    If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!
    15
    N97*FXXU1ZSL7 OneUI 2.0 / Android 10 Beta5

    ceoj4X.jpg
    8IzulF.jpg
    S2O3jX.jpg


    In addition to above, "Camera"-app has been updated too...

    Note10+:

    Beta5 (11 Dec) ZSL4 -> ZSL7 : N975F_ZSL4_ZSL7 (Thanks to SamMobile)

    Note10:

    Beta5 (11 Dec) ZSL4 -> ZSL7 : N970F_ZSL4_ZSL7 (Thanks to Cyber John )

    RENAME THE FILE TO update.zip

    NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Power)

    If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... ;) )

    UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!

    If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!

    If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!
    14
    N97*FXXU1ZSKN OneUI 2.0 / Android 10 Beta3

    JgJ86G.jpg
    k29ydT.jpg
    8ndk1n.jpg
    EA3Abs.jpg


    In addition to the changelist: Camera-firmware and Camera-app are also updated...

    Note10+:

    Beta3 (29 Nov) ZSK8 -> ZSKN : N975F_ZSK8_ZSKN (Thanks to GalaxyClub)

    Note10:

    Beta3 (29 Nov) ZSJ8 -> ZSKN : N970F_ZSJ8_ZSKN (Thanks to SamMobile)

    RENAME THE FILE TO update.zip

    NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Power)

    If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... ;) )

    UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!

    If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!

    If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!