[BugsReport] HardLight [4.4.4] CM 11.0 for LG Optimus One [OS2SD]

[xdema]

THREAD
"Hi, I've no 10 msg on xda so i can't report bugs to the dev " ​

Report here your questions/bugs about the rom, don't spam the dev thread with your 11th post :highfive:
I've created this thread without ask permission to HardLight, your warranty is now void :victory:

First of all, a big thanks to HardLight, skinbark and bigsupersquid for the OS2SD mod
AndroidMeda, Conn O'Griofa and other members of androidarmv6 for bringing KitKat to P500
CyanogenMod for sources

Here is the ROM : Link
please, read the first post
and remember:
To wipe clean 100% and install a new rom, in CWM or TWRP
Select “wipe data/factory reset
Select “yes”
Go to “mounts and storage”
Select “format /boot”
Select “yes”
Select “format /system”
Select “yes”
Back out of that menu to the main one again and select “advanced”
Select “Wipe Dalvik Cache”
Select “yes”

PLEASE UPDATE THE ROM ONLY WITH OS2SD UPDATES FROM HARDLIGHT'S THREAD

FROM OCTOBER ONLY THE F2FS OS2SD VERSION WILL BE DEVELOPED (best performance)

IF YOU UPDATE IN OTHER WAYS YOUR PHONE WILL BOOTLOOP

Summary:​

impression
Bugs/strange things
How To (2nd post)
- Minitool tutorial
- Overclock & Performance settings
- Superuser update and titanium backup problem
- Navigation bar with soft key
- Mod power button<-> search button (if your power button is broken)
- Saving battery
- Dialer pad number problem with L theme
- Make any rom an OS2SD rom


Impression, what i've done:

1st time:

with my "old" 8gb class 10 sd, a transcend, i've followed the instructions, with partition TWRP and TB
the first boot it's ok (after 2 min on the CM logo :fingers-crossed
open the options menu, i see lag and slow speed menu,
tried install some apps with TB and some were installed in the sd when i have "1 Gb" free in the internal memory.
Ok there was something wrong, so ... i changed the sd

2nd time:

format/wipe with a sandisk 8gb class 10, i've followed the instructions, 6 gb fat32, 380mb ext4, 128 swap, 1,1gb ext4
now everything it's ok, a little lag to launch the dialer and apps, like with the CM 4.1.2,
TB restore all apps in the "internal" memory :victory:

Performance​

performance settings: cpu 320-650, smartassv2, sio - kms page merging on,
dev options: set to 0,0 all animations,

without a sim or not in aereo mode the phone lag a bit, insert a sim or turn on Aereo

battery use as phone only, sms&call, 2g: yesterday 81% (14h), now 16% (2d 7h)

battery use as phone, data on 2g mode all the time and 1h gps:..

Bugs/strange things:

• in call the proximity sensor don't turn off the screen it happens only if you have enabled the loudspeaker or use hearphones
• for 3rd part apps use this to enable the airplane mode (with llama is not needed)
• sound volume:in sound options play a little with the notify/ringtone level, check or uncheck the separate volume option and play again with notify& ringtone level, to me they change together also with the "separate" options solved in 18/08/14 rom
• could i update to the latest normal or ota nightly? NO, you need an OS2SD rom, see the summary to make your os2sd rom
• wifi battery drain
• wifi hotspot,it need a reboot after use
• fm not working
• If you use Instagram, download the v.6.3.1: http://instagram.en.uptodown.com/android/download/72905
  please refer to this post for instagram downloader and xposed module etc (thanks to xu3sno)

 

[xdema]

How To:

- Repartition SD card, the minitool partition tutorial:

Now in the first post of the HardLight's thread, under "Installation instructions" there are two beautifull "Partitioning guides", please follow one of them step by step

1. start minitool partition, chose minitool partition wizard,
2. select your usb disk (i.e. with my 8gb sd i've selected the disk "basic 7,47 GB" )
3. if you have also a sd with 2 or more partitions you have to delete all partitions -> select partition and click on "delete" button
4. when you have all the space in your sd "unallocated" (in gray) you can create the partitions needed
5. so select your unallocated volume and clic the "create" button
6. if minitool say "the new created partition cannot be used in win..." click yes
7. in partition label: leave blanc, don't give it a name (no /system, system or anything else)
8. in create as select "Primary"
9. in file system select "fat32"
10. in cluster size leave default
11. in size location unallocated space before 0.00 MB
12. partition size 5900 MB
13. click ok
14. do last steps for a second partition: primary, select the file system "ext4", partition space 450MB (You need 380+ mb for system on f2fs.)
15. the same for 3rd: primary, select the file sistem "linux swap, partition space 128MB"
16. the same for the 4th: primary; select the file system "ext4", partition space ~1.100 MB
17. in the end you have to CLICK THE APPLY BUTTON, else nothing happens
    
    partition scheme for F2FS only:
    1st: 5850 mb FAT32
    2nd: 450 mb EXT4 (before flash the rom you have to change the file system to f2fs in TWRP-> select wipe->advanced wipe->SELECT Data -> click Repair or Change File System->Change File System>F2FS->swipe to change)
    3rd: 128 mb linux swap
    4th: ~1.100 mb EXT4 (change the file system to f2fs before install the rom)
    
    
    
    

- Overclock & Performance settings
To enable the performance menu you have to:

go to settings->about phone-> and tap tap tap tap tap tap ... tap on the "build number"

Now you've "dev options" & a "performance" menus at the end of the "settings" menu.

In dev options:

• you can find 3 scale animation options, set them to 0,0x

In Performance:

• set CPU min freq to 320, max to 729 (check "the set on boot" option) ... warning someone can keep 800+mhz but at long time this can BREAK (really) your phone & use a lot of battery
• set Governor to smartassv2
• set in I/O scheduler -> SIO or DEADLINE (check the "set on boot" option)
• set in Memory -> check the Kernel page merging
• uncheck "force high end graphic" (if you don't need a transparent notification bar)

make a reboot after these settings is highly recomended
in Testing PurePerformance mod

- Superuser update and titanium backup problem
if you have Superuser problem with titanium backup: i remember there was a fix to that, but the simple method is to install supersu (via TWRP) from the playstore

- Navigation bar with soft key
edit the build.prop and insert

qemu.hw.mainkeys=0

to show navigation bar with soft key

update, thanks to xu3sno

Well, for transparent/translucent status bar and softkeys, just edit build.prop, find ro.config.low_ram= true, change the value to false. It will enable translucent status bar.

Still in build.prop add line qemu.hw.mainkeys=0 in order to enable softkeys in navigation bar. Save > exit > reboot system.
Softkeys with L theme, install this module (you need Xposed of course). To enable L theme softkeys, go to Settings > Buttons > Buttons and layout > tap reset. However, once the screen lock and open, softkeys will back to the traditional one. Don't know, may be it's a bug.

- Mod power button<-> search button (if your power button is broken)
the search<->power button mod can be applied in the rom zip before to flash, with 7zip open the CM-11-XXXXXXX-NIGHTLY-OS2SD-p500.zip\system\usr\keylayout and you need only to sobstitute the 4 files manually inside the zip ( see in the mod thread -> manual version)

- Saving Battery
refer to this thread
and to this explanation
please don't use tweaks like the parsley
i'll test the wifi.supplicant_scan_interval=180 in the end this build.prop change don't saving power if wifi is connected but when not in range of a known network and you leave wifi on, you can set from 120 to ...3600 (i think is the time expressed in seconds to wake up the wifi and to check if there are known network).
2nd test: the bigsupersquid's patch need a new kernel, not applicable ATM
bigsupersquid patch and dovidhalevi iwconfig suggestion
on the second p500 (yes!, i use it only in aereo and wifi because i've no 2nd sim)

- Dialer pad number problem with L theme
If you see this in your dialer:

there is a problem in the L dark theme, until the theme dev will solve the problem you can click where you usually write phone numbers and swipe to the top.
or in the "speedcall""all contacts""favourite" tabs click on the search bar on top and write a number to call,now you can call the number directly from the search bar or then if you click the pad icon can see the full pad number

- Make any rom an OS2SD rom

Please read the HardLight Guide
try this if you want the latest nightly


Images:

with kitkat original theme and with L theme (Android L - CM 11 Theme, thanks to tung91 )

 

[HardLight]

Thanks, good thread.
By the way you won't be able to flash new nighly, first I need to modify it for sd.

Sent from my LG-P500 using xda premium

 

[xdema]

Thanks, good thread.
By the way you won't be able to flash new nighly, first I need to modify it for sd.

Sent from my LG-P500 using xda premium

thanks
i see in the updater-script that the mount point is set to this
mount("ext4", "EMMC", "/dev/block/mmcblk0p2", "/system")
a simple question, if i use this updater script mod with other rom (i.e. rhar****'s omega) and your TWRP could i make my "omega os2sd" or there is something else to change?
ah i pushed the thanks button, but however i want to say Thank you for your work

edit:
added at 1st post the link to the HardLight's os2sd guide

 

[brgil96]

Anyone tried using this rom with a class 4 sd card? I think I'm about to try it, even though I'm pretty sure it'll be slow like hell

 

[xdema]

Anyone tried using this rom with a class 4 sd card? I think I'm about to try it, even though I'm pretty sure it'll be slow like hell

a little bit, maybe,however also the internal memory transfer rate is 5-10 mb/s (lower than an usb2 transfer rate), is not like the hdd internal transfer rate (hundreds mb/s) or an ssd (gb/s)

what i can see is that, few apps = the phone is quite fast
much apps need internet connection = the phone is unusable

i've a decent use with Whatsapp on, but is the only app with data necessity unfreezed
the amazon store,appfree, skype, teamviewer etc. are freezed, and i'll unfreeze when needed

 

[rsbuttar7]

wats ths

cm11 or bug fixs

 

[brgil96]

a little bit, maybe,however also the internal memory transfer rate is 5-10 mb/s (lower than an usb2 transfer rate), is not like the hdd internal transfer rate (hundreds mb/s) or an ssd (gb/s)

what i can see is that, few apps = the phone is quite fast
much apps need internet connection = the phone is unusable

i've a decent use with Whatsapp on, but is the only app with data necessity unfreezed
the amazon store,appfree, skype, teamviewer etc. are freezed, and i'll unfreeze when needed

For some reason I never thought of freezing data apps, might give it a try.

 

[brgil96]

So I took the bait and installed it. Apart from the obvious delay when opening most apps (which is perfectly bearable so far), the rom runs smooth as silk. However, I don't have any additional apps apart from google's yet, so I still have to try that out. Time will tell.

PS: battery usage seems to be way lower so far (except for the wifi drain) when compared to gingersnap (which I was using before), and that's a first to me. You can barely say this battery is 4 years old (it's actually quite obvious but whatever x) )

 

[Przeszczep]

Bricked?

I've flashed this ROM with files for broken power button mod and gapps. After first boot everything seemed to be working but I was getting constant keyboard crashes so I've tried all that "reflash gapps, clear cache etc." As it didn't solve the problem I've downloaded a keyboard on PC but I couldn't connect the phone via USB (there was no notification about connection and nothing showing up on PC). Then I turned off the phone and I can't turn it back on and I can't enter recovery. It's completly dead. The only thing that is working is offline charging. However when screen turns off after a few seconds I can't wake it up with any button. What to do?

 

[xdema]

I've flashed this ROM with files for broken power button mod and gapps. After first boot everything seemed to be working but I was getting constant keyboard crashes so I've tried all that "reflash gapps, clear cache etc." As it didn't solve the problem I've downloaded a keyboard on PC but I couldn't connect the phone via USB (there was no notification about connection and nothing showing up on PC). Then I turned off the phone and I can't turn it back on and I can't enter recovery. It's completly dead. The only thing that is working is offline charging. However when screen turns off after a few seconds I can't wake it up with any button. What to do?

Please at this moment don't use the f2fs version, it's only for the brave, in the OP there are 2 kind of rom: a f2fs version and another not-f2sf

keyboard app problem -> go to setting -> app -> select keyboard -> clear data, clear cache (into this menu, not in the recovery or something else)
else you can try with another keyboard, usually i set swiftkey as default.

See you the LG logo and after a black screen?
if you didn't use KDZ or LGMDP to flash roms, usually you can enter in recovery (if somethings go wrong with LGMDP or KDZ you make an hardbrick).
so don't use KDZ by now
how to enter the recovery: pull out the battery, wait 2 sec, reinsert, push power on button (you can see the LG logo) and after keep only vol down and home buttons.
if you can see the recovery then reflash the rom

sometimes after the LG logo you see a black screen, please check if the phone is off or the screen is on but black, if it's black it could be you didn't pressed the vol+home buttons in time

if you have problem contact shinobisoft or HardLight and search the howto unbrick/revive p500 guides in xda (i remember that there were 3 or 4)

So I took the bait and installed it. Apart from the obvious delay when opening most apps (which is perfectly bearable so far), the rom runs smooth as silk. However, I don't have any additional apps apart from google's yet, so I still have to try that out. Time will tell.

PS: battery usage seems to be way lower so far (except for the wifi drain) when compared to gingersnap (which I was using before), and that's a first to me. You can barely say this battery is 4 years old (it's actually quite obvious but whatever x) )

with latest file system mod (f2fs) it should a bit faster, tomorrow i'll test on my 2nd p500 (actually with omega rom), see the HardLight's thread

 

[Przeszczep]

I've managed to somehow turn on the phone but i still have 2 problems:

• Crashing keyboard app. It has no data and 24.00KB cache. However I don't know if I can clear it because when I tap on "Clear cache" nothing happens and it stays at 24KB.
  
• I can't add Google account. In settings I tap on "Add account" and nothing happens.

Factory reset and reflashing gapps didn't resolve those issues.

 

[xdema]

I've managed to somehow turn on the phone but i still have 2 problems:

• Crashing keyboard app. It has no data and 24.00KB cache. However I don't know if I can clear it because when I tap on "Clear cache" nothing happens and it stays at 24KB.
  
• I can't add Google account. In settings I tap on "Add account" and nothing happens.

Factory reset and reflashing gapps didn't resolve those issues.

fix for keyboard issue: the keyboard app is corrupted
fix: http://forum.xda-developers.com/showpost.php?p=55220723&postcount=99

G account: are you with the f2fs rom or not?

 

[Przeszczep]

Keyboard working.

G account: are you with the f2fs rom or not?

Yes I'm using f2fs.

 

[xdema]

Keyboard working.

Yes I'm using f2fs.

the 31/08 seem have some corrupted files, now i'm trying with the bigsupersquid 30/08 rom

 

[Flo.de]

Skype 5 is not working on my P500, the previous version 4 worked. Is anyone experiencing the same problem?

I have attached my logcat output below, however I cannot deduct any useful information from that. I am using hardlight's current CM version from 30th august.

I/Timeline(  686): Timeline: Activity_launch_request id:com.skype.raider time:65250488
I/ActivityManager(  426): START u0 {act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10200000 cmp=com.skype.raider/.Main bnds=[82,191][148,264]} from pid 686
V/Zygote  (20585): Switching descriptor 31 to /dev/null
V/Zygote  (20585): Switching descriptor 10 to /dev/null
I/ActivityManager(  426): Start proc com.skype.raider for activity com.skype.raider/.Main: pid=20585 uid=10118 gids={50118, 1006, 3003, 3002, 1028, 1015}
D/ActivityThread(20585): handleBindApplication:com.skype.raider
D/ActivityThread(20585): setTargetHeapUtilization:0.25
D/ActivityThread(20585): setTargetHeapMinFree:524288
V/ActivityThread(20585): com.skype.raider white listed for hwui
D/dalvikvm(20585): Trying to load lib /data/app-lib/com.skype.raider-1/libSkypeAndroid.so 0x419d0760
D/dalvikvm(20585): Added shared lib /data/app-lib/com.skype.raider-1/libSkypeAndroid.so 0x419d0760
D//Ln.java:218(20585): main Configuring Logging, minimum log level is INFO
D/dalvikvm(20585): Trying to load lib /data/app-lib/com.skype.raider-1/libSkyLib.so 0x419d0760
E/CrashAndAnrHandler(20585): Dumping stack for signal 7
E/CrashAndAnrHandler(20585): Dumping stack for signal 11
D/Zygote  (  134): Process 20585 terminated by signal (11)
I/ActivityManager(  426): Process com.skype.raider (pid 20585) has died.
V/Zygote  (20600): Switching descriptor 31 to /dev/null
V/Zygote  (20600): Switching descriptor 10 to /dev/null
I/ActivityManager(  426): Start proc com.skype.raider for activity com.skype.raider/.Main: pid=20600 uid=10118 gids={50118, 1006, 3003, 3002, 1028, 1015}
D/ActivityThread(20600): handleBindApplication:com.skype.raider
D/ActivityThread(20600): setTargetHeapUtilization:0.25
D/ActivityThread(20600): setTargetHeapMinFree:524288
V/ActivityThread(20600): com.skype.raider white listed for hwui
D/dalvikvm(20600): Trying to load lib /data/app-lib/com.skype.raider-1/libSkypeAndroid.so 0x419d1670
D/dalvikvm(20600): Added shared lib /data/app-lib/com.skype.raider-1/libSkypeAndroid.so 0x419d1670
W/ActivityManager(  426): Launch timeout has expired, giving up wake lock!
D//Ln.java:218(20600): main Configuring Logging, minimum log level is INFO
D/dalvikvm(20600): Trying to load lib /data/app-lib/com.skype.raider-1/libSkyLib.so 0x419d1670
E/CrashAndAnrHandler(20600): Dumping stack for signal 7
E/CrashAndAnrHandler(20600): Dumping stack for signal 11
D/Zygote  (  134): Process 20600 terminated by signal (11)
I/ActivityManager(  426): Process com.skype.raider (pid 20600) has died.
V/Zygote  (20615): Switching descriptor 31 to /dev/null
V/Zygote  (20615): Switching descriptor 10 to /dev/null
I/ActivityManager(  426): Start proc com.skype.raider for activity com.skype.raider/.Main: pid=20615 uid=10118 gids={50118, 1006, 3003, 3002, 1028, 1015}
D/ActivityThread(20615): handleBindApplication:com.skype.raider
D/ActivityThread(20615): setTargetHeapUtilization:0.25
D/ActivityThread(20615): setTargetHeapMinFree:524288
V/ActivityThread(20615): com.skype.raider white listed for hwui
D/dalvikvm(20615): Trying to load lib /data/app-lib/com.skype.raider-1/libSkypeAndroid.so 0x419d2590
D/dalvikvm(20615): Added shared lib /data/app-lib/com.skype.raider-1/libSkypeAndroid.so 0x419d2590
D//Ln.java:218(20615): main Configuring Logging, minimum log level is INFO
D/dalvikvm(20615): Trying to load lib /data/app-lib/com.skype.raider-1/libSkyLib.so 0x419d2590
E/CrashAndAnrHandler(20615): Dumping stack for signal 7
E/CrashAndAnrHandler(20615): Dumping stack for signal 11
I/ActivityManager(  426): Process com.skype.raider (pid 20615) has died.
W/ActivityManager(  426): Force removing ActivityRecord{423a5838 u0 com.skype.raider/.Main t41}: app died, no saved state
D/Zygote  (  134): Process 20615 terminated by signal (11)
W/InputMethodManagerService(  426): Window already focused, ignoring focus gain of: [email protected] attribute=null, token = [email protected]
I/Timeline(  686): Timeline: Activity_idle id: [email protected] time:65269779

 

[nesty1990]

the 31/08 seem have some corrupted files, now i'm trying with the bigsupersquid 30/08 rom

about this problem,

i have tried f2fs builds from 8/30, 9/5 and 9/8 ... and i cant get gapps to work in any of those ...

however gapps are working fine on ext4 version ... tried two latest from hardlights drive

is it possible that gapps are just not working on fresh install f2fs builds?
and upgrading from ext4 version to f2fs with converting data partition should work ?

/edit
well nevermind, hardlight uploaded new version of gapps and f2fs build works for me now

thank you hardlight & everyone affiliated

 

[xdema]

Skype 5 is not working on my P500, the previous version 4 worked. Is anyone experiencing the same problem?

I have attached my logcat output below, however I cannot deduct any useful information from that. I am using hardlight's current CM version from 30th august.

I/Timeline(  686): Timeline: Activity_launch_request id:com.skype.raider time:65250488
I/ActivityManager(  426): START u0 {act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10200000 cmp=com.skype.raider/.Main bnds=[82,191][148,264]} from pid 686
V/Zygote  (20585): Switching descriptor 31 to /dev/null
V/Zygote  (20585): Switching descriptor 10 to /dev/null
I/ActivityManager(  426): Start proc com.skype.raider for activity com.skype.raider/.Main: pid=20585 uid=10118 gids={50118, 1006, 3003, 3002, 1028, 1015}
D/ActivityThread(20585): handleBindApplication:com.skype.raider
D/ActivityThread(20585): setTargetHeapUtilization:0.25
D/ActivityThread(20585): setTargetHeapMinFree:524288
V/ActivityThread(20585): com.skype.raider white listed for hwui
D/dalvikvm(20585): Trying to load lib /data/app-lib/com.skype.raider-1/libSkypeAndroid.so 0x419d0760
D/dalvikvm(20585): Added shared lib /data/app-lib/com.skype.raider-1/libSkypeAndroid.so 0x419d0760
D//Ln.java:218(20585): main Configuring Logging, minimum log level is INFO
D/dalvikvm(20585): Trying to load lib /data/app-lib/com.skype.raider-1/libSkyLib.so 0x419d0760
E/CrashAndAnrHandler(20585): Dumping stack for signal 7
E/CrashAndAnrHandler(20585): Dumping stack for signal 11
D/Zygote  (  134): Process 20585 terminated by signal (11)
I/ActivityManager(  426): Process com.skype.raider (pid 20585) has died.
V/Zygote  (20600): Switching descriptor 31 to /dev/null
V/Zygote  (20600): Switching descriptor 10 to /dev/null
I/ActivityManager(  426): Start proc com.skype.raider for activity com.skype.raider/.Main: pid=20600 uid=10118 gids={50118, 1006, 3003, 3002, 1028, 1015}
D/ActivityThread(20600): handleBindApplication:com.skype.raider
D/ActivityThread(20600): setTargetHeapUtilization:0.25
D/ActivityThread(20600): setTargetHeapMinFree:524288
V/ActivityThread(20600): com.skype.raider white listed for hwui
D/dalvikvm(20600): Trying to load lib /data/app-lib/com.skype.raider-1/libSkypeAndroid.so 0x419d1670
D/dalvikvm(20600): Added shared lib /data/app-lib/com.skype.raider-1/libSkypeAndroid.so 0x419d1670
W/ActivityManager(  426): Launch timeout has expired, giving up wake lock!
D//Ln.java:218(20600): main Configuring Logging, minimum log level is INFO
D/dalvikvm(20600): Trying to load lib /data/app-lib/com.skype.raider-1/libSkyLib.so 0x419d1670
E/CrashAndAnrHandler(20600): Dumping stack for signal 7
E/CrashAndAnrHandler(20600): Dumping stack for signal 11
D/Zygote  (  134): Process 20600 terminated by signal (11)
I/ActivityManager(  426): Process com.skype.raider (pid 20600) has died.
V/Zygote  (20615): Switching descriptor 31 to /dev/null
V/Zygote  (20615): Switching descriptor 10 to /dev/null
I/ActivityManager(  426): Start proc com.skype.raider for activity com.skype.raider/.Main: pid=20615 uid=10118 gids={50118, 1006, 3003, 3002, 1028, 1015}
D/ActivityThread(20615): handleBindApplication:com.skype.raider
D/ActivityThread(20615): setTargetHeapUtilization:0.25
D/ActivityThread(20615): setTargetHeapMinFree:524288
V/ActivityThread(20615): com.skype.raider white listed for hwui
D/dalvikvm(20615): Trying to load lib /data/app-lib/com.skype.raider-1/libSkypeAndroid.so 0x419d2590
D/dalvikvm(20615): Added shared lib /data/app-lib/com.skype.raider-1/libSkypeAndroid.so 0x419d2590
D//Ln.java:218(20615): main Configuring Logging, minimum log level is INFO
D/dalvikvm(20615): Trying to load lib /data/app-lib/com.skype.raider-1/libSkyLib.so 0x419d2590
E/CrashAndAnrHandler(20615): Dumping stack for signal 7
E/CrashAndAnrHandler(20615): Dumping stack for signal 11
I/ActivityManager(  426): Process com.skype.raider (pid 20615) has died.
W/ActivityManager(  426): Force removing ActivityRecord{423a5838 u0 com.skype.raider/.Main t41}: app died, no saved state
D/Zygote  (  134): Process 20615 terminated by signal (11)
W/InputMethodManagerService(  426): Window already focused, ignoring focus gain of: [email protected] attribute=null, token = [email protected]
I/Timeline(  686): Timeline: Activity_idle id: [email protected] time:65269779

skype 5.0.0.49715 it was ok for me on os2sd (not the f2fs version) now i've installed latest version from playstore, click the icon did nothing, so back to v4 (last titanium backup)

 

[nesty1990]

microphone is really silent in the latest build ... at normal setting no one can hear me, when i put it on speaker i have to hold it right next to mount to get my voice barely hear-able......

 

[xdema]

microphone is really silent in the latest build ... at normal setting no one can hear me, when i put it on speaker i have to hold it right next to mount to get my voice barely hear-able......

reported to HardLight's thread