CamUIX V4 Custom Rom LG G4 H818P/H818N (W/O Recovery & bootloader Unlock)
- Thread starter starpandi2004
- Start date
the dual sim variants is hard to find custom rom.. hehe
Sent from my LG G4 using XDA Labs
LG root Download is not workingCamUIX V4 - alpha Mod
CUSTOM ROM for LG G4 H818P/H818N
there is no separate threads not available for LG g4 Dual's Custom Rom, that's why i have to write this POST
its not my work. its a hard work of our Russian friend DS-302 . i just explain what have done to my LG G4...
all credits go to him.......
Download "LG Root" here: http://d-h.st/uO8h
CamUIX V4 alpha Mod is looking good to me....CamUIX V3 is a good one too....
DOWNLOAD THE LATEST SYSTEM IMG OF CamUIX V4 Alpha Mod from here:
https://yadi.sk/d/R2XNzcyftmC7M
DOWNLOAD THE SYSTEM IMG OF CamUIX V3 from here:
https://yadi.sk/d/5_qHqvukrkkbz
Move the downloading "system.img" file to the root of your phone's internal storage
Once this has been done, POWER OFF your phone normally and disconnect from PC. After LED stops blinking (OFF properly), Hold the UP VOLUME key and re-insert the USB cable from your PC to your phone. If done correctly, you should see DOWNLOAD MODE in small font in middle of the screen. it will then display another screen with text: FIRMWARE UPDATE (a USB logo) a warning to not unplug and a status bar at 0%.
On a windows PC, Start a command prompt (Start > Run > cmd) and navigate to the unzipped contents folder of LG Root (which is downloaded for LG g4 Root process). (On my PC, the command prompt line after navigation to my unzipped folder looks like C:\Users\star\Desktop\LG_Root\ ).
Let's verify the COM port your phone is connected to. double click the file "ports.bat" in LG_Root folder. Look for the COM number that corresponds to "DIAG1". **WRITE DOWN / REMEMBER THE COMM PORT NUMBER!** Let's assume it's COM3. Click any key/exit this window now...
copy/paste or type this command MAKING SURE THE RIGHT COMM NUMBER IS ENTERED: Send_Command.exe \\.\COM3
You should see Author: blog.lvu.kr and SPECIAL COMMAND : ENTER, LEAVE on 2 lines followed by a hashtag (#). If you are up to this point, type id and press ENTER
You should get back some text starting with "uid=(0)root gid=(0)root".
If it worked for you, from here run the command below (copy/paste next to the # and press ENTER)
dd if=/data/media/0/system.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0
If you've done this correctly, as soon as you've pressed ENTER, you'll see a blinking cursor, probably for a few minutes. Basically the pre-rooted system image you are FLASHING to your phone is being written, so it may take a few minutes. When complete, you should see #. If you see this, it's DONE! Type LEAVE (in CAPS)and press ENTER. Your phone should then restart... Here's mine, it worked like charm!
hit "THANKS" button on this post if this has been of assistance to you...
other useful Links related to downgrade & Root
http://forum.xda-developers.com/showpost.php?p=62075670&postcount=381
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
http://forum.xda-developers.com/showpost.php?p=64518905&postcount=1805
You gonna download the Firmware + Rooted image from above post
+ all the root file and lgup in that above post
*Backup your data first , you gonna wipe your phone !!
Then follow the same instruction for LG up
(Install DLL first then the LGUP app)
1- Download the app , Also download KDZ file of your Desire
2- Make sure your phone is Charged at least 80% (Just to be safe)
3- Connect your phone to your PC using your cable , PC should Identify your phone
4- Choose "Upgrade" Then choose the KDZ you Desire (Lollipop or Marshmallow) (H818p or H818n)
5- After you Successfully Choose the KDZ file , Change your Selection to "Refurbish"
6- Click "Start" , Wait for sometime , Your phone will restart , Leave it .
7- Finally the phone will boot up to the Installation Wizard page , and LG UP will say 100% Done
8- Hard Reset / Factory Reset is recommended after an Upgrade or Downgrade .
Full credit goes to our Russian Friend DS-302. I just happy to share this with our G4 community with this separate post.
:good:
The page is coming but after press download now then it redirects download server address and its not working, i have attached a snapits working dear. check again...
Attachments
No bro, i have tried on 50mbps brodband also. Just try it is just 4mb thing
Any way exit to unlock bootloader of lg g4 h818nCamUIX V4 - alpha Mod
CUSTOM ROM for LG G4 H818P/H818N
there is no separate threads not available for LG g4 Dual's Custom Rom, that's why i have to write this POST
its not my work. its a hard work of our Russian friend DS-302 . i just explain what have done to my LG G4...
all credits go to him.......
Download "LG Root" here: http://d-h.st/uO8h
CamUIX V4 alpha Mod is looking good to me....CamUIX V3 is a good one too....
DOWNLOAD THE LATEST SYSTEM IMG OF CamUIX V4 Alpha Mod from here:
https://yadi.sk/d/R2XNzcyftmC7M
DOWNLOAD THE SYSTEM IMG OF CamUIX V3 from here:
https://yadi.sk/d/5_qHqvukrkkbz
Move the downloading "system.img" file to the root of your phone's internal storage
Once this has been done, POWER OFF your phone normally and disconnect from PC. After LED stops blinking (OFF properly), Hold the UP VOLUME key and re-insert the USB cable from your PC to your phone. If done correctly, you should see DOWNLOAD MODE in small font in middle of the screen. it will then display another screen with text: FIRMWARE UPDATE (a USB logo) a warning to not unplug and a status bar at 0%.
On a windows PC, Start a command prompt (Start > Run > cmd) and navigate to the unzipped contents folder of LG Root (which is downloaded for LG g4 Root process). (On my PC, the command prompt line after navigation to my unzipped folder looks like C:\Users\star\Desktop\LG_Root\ ).
Let's verify the COM port your phone is connected to. double click the file "ports.bat" in LG_Root folder. Look for the COM number that corresponds to "DIAG1". **WRITE DOWN / REMEMBER THE COMM PORT NUMBER!** Let's assume it's COM3. Click any key/exit this window now...
copy/paste or type this command MAKING SURE THE RIGHT COMM NUMBER IS ENTERED: Send_Command.exe \.\COM3
You should see Author: blog.lvu.kr and SPECIAL COMMAND : ENTER, LEAVE on 2 lines followed by a hashtag (#). If you are up to this point, type id and press ENTER
You should get back some text starting with "uid=(0)root gid=(0)root".
If it worked for you, from here run the command below (copy/paste next to the # and press ENTER)
dd if=/data/media/0/system.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0
If you've done this correctly, as soon as you've pressed ENTER, you'll see a blinking cursor, probably for a few minutes. Basically the pre-rooted system image you are FLASHING to your phone is being written, so it may take a few minutes. When complete, you should see #. If you see this, it's DONE! Type LEAVE (in CAPS)and press ENTER. Your phone should then restart... Here's mine, it worked like charm!
hit "THANKS" button on this post if this has been of assistance to you...
other useful Links related to downgrade & Root
http://forum.xda-developers.com/showpost.php?p=62075670&postcount=381
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
http://forum.xda-developers.com/showpost.php?p=64518905&postcount=1805
You gonna download the Firmware + Rooted image from above post
+ all the root file and lgup in that above post
*Backup your data first , you gonna wipe your phone !!
Then follow the same instruction for LG up
(Install DLL first then the LGUP app)
1- Download the app , Also download KDZ file of your Desire
2- Make sure your phone is Charged at least 80% (Just to be safe)
3- Connect your phone to your PC using your cable , PC should Identify your phone
4- Choose "Upgrade" Then choose the KDZ you Desire (Lollipop or Marshmallow) (H818p or H818n)
5- After you Successfully Choose the KDZ file , Change your Selection to "Refurbish"
6- Click "Start" , Wait for sometime , Your phone will restart , Leave it .
7- Finally the phone will boot up to the Installation Wizard page , and LG UP will say 100% Done
8- Hard Reset / Factory Reset is recommended after an Upgrade or Downgrade .
Full credit goes to our Russian Friend DS-302. I just happy to share this with our G4 community with this separate post.
:good:
still there is No way to Unlock BL :crying:
i installed satan n volte works just fine i tired camuixv4 it didnt work
My current firmware version is v10c..can i flash the camUIX v3 or v4 without problem?
force closing
I am getting "force closing Home" i install CamUIX V3 over [H818P][10L][UAE-AME][KDZ]. please suggest me
I am getting "force closing Home" i install CamUIX V3 over [H818P][10L][UAE-AME][KDZ]. please suggest me
can you please explain what is "satan" and how did you install ? where to find that ?
---------- Post added at 06:34 PM ---------- Previous post was at 06:33 PM ----------
Last edited:
Satan is advanced Version of Camuix which is developed by russian Developer DS-302. install pls see my first post in this thread. Find @ 4PDA.ru :highfive:
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone