¿Can I install ATV 9 on this box? TX3 Mini [S905W] NAND 3D?

Search This thread

leo025

Senior Member
Dec 9, 2012
73
8
Hi my friends. Please I need your help. I have a box TX3 mini (S905W) with 2GB RAM / 16GB internal. The board is blue (maybe clone/generic) and was release on march 2019. I tried to load many firmware like Aidan's ROM or atvX v4 but unsuccessful, always fail, stops after 7% with error " [0x32030201]Uboot/Get result/DiskInitial error". The only firmware that I could install was AndroidTV_7_S905W_Bluetooth_Tue_Minh_20190320.zip from a vietnamese website HERE.

Is there anything else that I can do for install any ATV 9 ROM? And how?
Thanks in advance.

tx3-mini-board.jpg
 
Last edited:

leo025

Senior Member
Dec 9, 2012
73
8
I used all the firmware recommendations by @asegura074 but still stops after 7% with error " [0x32030201]Uboot/Get result/DiskInitial error" on USB burning tool 2.2.0. I had success only with these ATV 7 roms :

1. AndroidTV_7_S905W_Bluetooth_Tue_Minh_20190320.zip a vietnamese
2. Neutral-9012-Alice-8.1-TX3Mini-20191014.img
3. atvXperience_S905W_V2H_FINAL_TX3_NEW_REVISION.img

What's wrong with my TX3 mini S905W clone? Please, can anybosy help me? Why I can't use any ATV 9 firmware? :cry:
 

asegura074

Member
Jul 10, 2018
31
22
I used all the firmware recommendations by @asegura074 but still stops after 7% with error " [0x32030201]Uboot/Get result/DiskInitial error" on USB burning tool 2.2.0. I had success only with these ATV 7 roms :

1. AndroidTV_7_S905W_Bluetooth_Tue_Minh_20190320.zip a vietnamese
2. Neutral-9012-Alice-8.1-TX3Mini-20191014.img
3. atvXperience_S905W_V2H_FINAL_TX3_NEW_REVISION.img

What's wrong with my TX3 mini S905W clone? Please, can anybosy help me? Why I can't use any ATV 9 firmware? :cry:
try with slimbox Rom to test
 
  • Like
Reactions: leo025

enerdude

Member
Jun 15, 2015
23
13
I used all the firmware recommendations by @asegura074 but still stops after 7% with error " [0x32030201]Uboot/Get result/DiskInitial error" on USB burning tool 2.2.0. I had success only with these ATV 7 roms :

1. AndroidTV_7_S905W_Bluetooth_Tue_Minh_20190320.zip a vietnamese
2. Neutral-9012-Alice-8.1-TX3Mini-20191014.img
3. atvXperience_S905W_V2H_FINAL_TX3_NEW_REVISION.img

What's wrong with my TX3 mini S905W clone? Please, can anybosy help me? Why I can't use any ATV 9 firmware? :cry:
I heard people say sometime the usb on its own does not have enough power, maybe after connecting the usb cable and when burning tool detects your box, add the normal power cable if you haven't done so in the past.

Not sure if my tx3 mini is same as yours cause I did not open it. I ran specdevice and established that my tx3 mini had different wifi than most (9012p). I used this ATV9 of Aidan:

Good luck.
 
  • Like
Reactions: leo025

leo025

Senior Member
Dec 9, 2012
73
8
Hi again. I don't had luck @asegura074 and @enerdude both firmware not working. @idanmacgregor rom and slimbox bricked my box.

But finally I identified my box. The board is CS_905W_TX_3D_V1.3. I think is NAND 3D here the images.
IMG-20210426-WA0004.jpg
IMG-20210426-WA0005.jpg


And my WIFI/BT specs are odd. The specdevice show me dwc3 on wifi and bt only yes.

IMG_20210711_173648707.jpg


Is it possible to install ATV 9 firmware for this NAND 3D? how? I think that's the problem :cry:
 
Last edited:

enerdude

Member
Jun 15, 2015
23
13
Hi again. I don't had luck @asegura074 and @enerdude both firmware not working. @idanmacgregor rom and slimbox bricked my box.

But finally I identified my box. The board is CS_905W_TX_3D_V1.3. I think is NAND 3D here the images.
View attachment 5361239View attachment 5361241

And my WIFI/BT specs are odd. The specdevice show me unidentified wifi. I'll attach the screenshot soon.

Is it possible to install ATV 9 firmware for this NAND 3D? how? I think that's the problem :cry:
Form the 2nd picture it seems you have a 8723 wifi chip. Maybe @idanmacgregor can comment whether his rom would work?
 
  • Like
Reactions: leo025

asegura074

Member
Jul 10, 2018
31
22
Hi again. I don't had luck @asegura074 and @enerdude both firmware not working. @idanmacgregor rom and slimbox bricked my box.

But finally I identified my box. The board is CS_905W_TX_3D_V1.3. I think is NAND 3D here the images.
View attachment 5361239View attachment 5361241

And my WIFI/BT specs are odd. The specdevice show me dwc3 on wifi and bt only yes.

View attachment 5361447

Is it possible to install ATV 9 firmware for this NAND 3D? how? I think that's the problem :cry:
Did you tried aidian's rtl8723bs firmware ?

 
  • Like
Reactions: leo025 and enerdude

leo025

Senior Member
Dec 9, 2012
73
8
@asegura074, @enerdude Thank your for all your recommendations but still bricking my box TX3 mini with board is CS_905W_TX_3D_V1.3 (NAND 3D). Do you know another good ATV 9 firmware?
 
Last edited:

leo025

Senior Member
Dec 9, 2012
73
8
You are right it is the 3D nand, i beleve its an issue with the amlogic bootloader or the 4.XX kernel bot supporting 3D Nand, unfortunatley you will probably be stuck on amdroid 7.1.2 maximum :)
@aidanmacgregor thanks for reply. Well I suppose that I need to live with ATV 7 :cry: but the version that I installed have so many bugs like bt, tv remote, chromecast built, clock and more.

Does anybody know a stable firmware version of ATV 7.1.2 for my board with 3D nand? Thanks for advance
 

aidanmacgregor

Senior Member
Nov 19, 2011
1,542
485
Caithness
aidanrom.com
@aidanmacgregor thanks for reply. Well I suppose that I need to live with ATV 7 :cry: but the version that I installed have so many bugs like bt, tv remote, chromecast built, clock and more.

Does anybody know a stable firmware version of ATV 7.1.2 for my board with 3D nand? Thanks for advance
BT may be fixable by replacing libbtvendor.so file, remote is easier to fix on android 7 as it accepts remote.conf files, this can ne taken from another rom your remote works in like the stock rom :)
 

asegura074

Member
Jul 10, 2018
31
22
@aidanmacgregor thanks for reply. Well I suppose that I need to live with ATV 7 :cry: but the version that I installed have so many bugs like bt, tv remote, chromecast built, clock and more.

Does anybody know a stable firmware version of ATV 7.1.2 for my board with 3D nand? Thanks for advance
1626814240795.png


In other Forum they say the best way for this board is using burncarnd maker open the burncard maker , select the drive letter drive the sdcard then select the options like the picture select the file aml_upgrade_package.img, click Make. this will prepare a Sdcard with the upgrade image, once is done place the Sdcard in the box and reboot into recovery


if doesn't work then Check this
in 4pda they say the tx3mini nand also called tx3 max here is a colecction o roms for this board




 
Last edited:

aidanmacgregor

Senior Member
Nov 19, 2011
1,542
485
Caithness
aidanrom.com
View attachment 5366917

In other Forum they say the best way for this board is using burncarnd maker open the burncard maker , select the drive letter drive the sdcard then select the options like the picture select the file aml_upgrade_package.img, click Make. this will prepare a Sdcard with the upgrade image, once is done place the Sdcard in the box and reboot into recovery


if doesn't work then Check this
in 4pda they say the tx3mini nand also called tx3 max here is a colecction o roms for this board





I will have a look at this firmware file :)
 

NullCode

Senior Member
Hi my friends. Please I need your help. I have a box TX3 mini (S905W) with 2GB RAM / 16GB internal. The board is blue (maybe clone/generic) and was release on march 2019. I tried to load many firmware like Aidan's ROM or atvX v4 but unsuccessful, always fail, stops after 7% with error " [0x32030201]Uboot/Get result/DiskInitial error". The only firmware that I could install was AndroidTV_7_S905W_Bluetooth_Tue_Minh_20190320.zip from a vietnamese website HERE.

Is there anything else that I can do for install any ATV 9 ROM? And how?
Thanks in advance.

View attachment 5356275
Sup
I got the exact same TV revision lmfao

I've been researching a lot, and it seems the reason why ROMs don't work for our box is because of the 3D NAND chip (TX_"3D"_v1.3). Literally all the other ROMs are made for eMMC

I wasted my time trying every single A9 ROM on planet Earth (atvX, aidan, poison, etc.) to no avail :(
Mind if you could send over the stock ROM? My box's preddy bricked atm. Mega or sth would be good

Edit: Unbricked the damn thing using this

1632054880732.png

Also yes burncardmaker seems to be the best way to get this fixed
 

Attachments

  • 20210917_204341.jpg
    20210917_204341.jpg
    289 KB · Views: 172
Last edited:

ivanovish28

Member
Jul 18, 2015
5
1
Hey members, am happy to be here all along i have been trying to get the firmware that can bring back to life my Tx3mini (CS_905W_TX_3D_V1.3) but all in vain. Could there be a good Samaritan & forward me the firmware that is compatible with this very board... Stock ROM or custom rom i will be thankfull.
For now the Android box led screen only shows "BOOT" when there is nothing on the tv screen... Help help.. It got bricked in 2018 we are in 2023 some one come to my rescue
 

Attachments

  • IMG_20230110_183816_922_1_1.jpg
    IMG_20230110_183816_922_1_1.jpg
    1.9 MB · Views: 26
  • IMG_20230110_183748_180_1.jpg
    IMG_20230110_183748_180_1.jpg
    2.6 MB · Views: 27

Top Liked Posts