Canbus problem MTCD ML for Ford Mondeo MK4

[t-shock]

Hi
I recently updated my GPS's firmware and MCU to the latest available. (GPS is Erisin ES3009F)
MCU Version
MTCD_LM_V2.52_1

Build Number
rk3188 (blah blah blah)

But unfortunately all canbus settings are gone and I'm not able to find any solution. I have tried many different options from the canbus menu (factory settings) but everyone of them has a problem
Option 1: No (works but the GPS wont start after closing the car)
Option 2: 11 FORD_MONDEO (Simple) the GPS wont start even 1 time
Option 3: 49 FOCUS_MONDEO_EXPLORER (Simple) same as the 1st
Option 4: 62 FOCUS_ECOSPORT&ESCAPE&CARNIVAL (Simple) same as the 1st

After many tries, I connected the red and yellow cable (not from the canbus but from the ones that are "free") and GPS works, but it wont sleep at all and it will consume A LOT OF energy (and my battery died too.......)

So (conclusion time), the GPS will either work but no sleep at all or it will work for the first time and after closing the car, it stops working (I forgot to mention that the car is Mondeo MK4)


Any help is welcome
THANKS

 

[ozzyboy]

downgrade MCU? try with older dmcu.img

 

[t-shock]

downgrade MCU? try with older dmcu.img

I tried with 1.92 version (as far as I remember) and still the results are the same

 

[ozzyboy]

with what version of mcu all settings worked right? do you remember that? ... if yes try it exactly with that vrs.

 

[t-shock]

with what version of mcu all settings worked right? do you remember that? ... if yes try it exactly with that vrs.

yes
luckily i had a screenshot

it was v1.63_1 (built at jun 12 2016)
but I cant find it anywhere

 

[ozzyboy]

in this post you can find some LM mcu ... browse for LM mcu between posts ....or try to request here or request to seller support.

 

[t-shock]

in this post you can find some LM mcu ... browse for LM mcu between posts ....or try to request here or request to seller support.

Thanks but I have seen this thread already, plus erisin has been ignoring me for the last 2-3 weeks (so no reason for me, to speak with them)
I will look again in this thread though

 

[ikerg]

Hi
I recently updated my GPS's firmware and MCU to the latest available. (GPS is Erisin ES3009F)
MCU Version
MTCD_LM_V2.52_1

Build Number
rk3188 (blah blah blah)

But unfortunately all canbus settings are gone and I'm not able to find any solution. I have tried many different options from the canbus menu (factory settings) but everyone of them has a problem
Option 1: No (works but the GPS wont start after closing the car)
Option 2: 11 FORD_MONDEO (Simple) the GPS wont start even 1 time
Option 3: 49 FOCUS_MONDEO_EXPLORER (Simple) same as the 1st
Option 4: 62 FOCUS_ECOSPORT&ESCAPE&CARNIVAL (Simple) same as the 1st

After many tries, I connected the red and yellow cable (not from the canbus but from the ones that are "free") and GPS works, but it wont sleep at all and it will consume A LOT OF energy (and my battery died too.......)

So (conclusion time), the GPS will either work but no sleep at all or it will work for the first time and after closing the car, it stops working (I forgot to mention that the car is Mondeo MK4)


Any help is welcome
THANKS

You forgot to include a photo of the information of the sticker onto the canbus box

Enviado desde mi D6603 mediante Tapatalk

 

[t-shock]

You forgot to include a photo of the information of the sticker onto the canbus box

Enviado desde mi D6603 mediante Tapatalk

The Canbus is inside the GPS unit

 

[ikerg]

Is there any other ford canbus option for other brand rather than "Simple"?
try it
But the best way is to ask Erisin for the correct option on factory settings

 

[t-shock]

Is there any other ford canbus option for other brand rather than "Simple"?
try it
But the best way is to ask Erisin for the correct option on factory settings

Unfortuantely, no

I asked them, but yet to answer...........

 

[[email protected]]

Got problems with interated canbus in Erisin 3015 too.

Support = 0

I try to install a external canbus decoder and switch dip 3 to off.

 

[o_tom]

I have a Wondeffo HU (PX5 4GB Oreo, v2.83 MCU), but dont working the Convers+, I cant see the Climate... only the steereing buttons workin.
My Mfriend has Bosion 6.0, thats workin great.
<a href="https://ibb.co/f6OX2d"><img src="https://thumb.ibb.co/f6OX2d/29541482_10216565646958469_8683319995895379641_n.jpg" alt="29541482_10216565646958469_8683319995895379641_n" border="0"></a> <a href="https://ibb.co/dAZ0oJ"><img src="https://thumb.ibb.co/dAZ0oJ/29542991_10216565645278427_6955562041658564393_n.jpg" alt="29542991_10216565645278427_6955562041658564393_n" border="0"></a> <a href="https://ibb.co/mHX38J"><img src="https://thumb.ibb.co/mHX38J/33303711_1966988713376157_199401969910022144_n.jpg" alt="33303711_1966988713376157_199401969910022144_n" border="0"></a> <a href="https://ibb.co/mBaO8J"><img src="https://thumb.ibb.co/mBaO8J/33455431_1966988446709517_5621947658856824832_n.jpg" alt="33455431_1966988446709517_5621947658856824832_n" border="0"></a>

 

[yaris1]

Canbus

I have a Wondeffo HU (PX5 4GB Oreo, v2.83 MCU), but dont working the Convers+, I cant see the Climate... only the steereing buttons workin.
My Mfriend has Bosion 6.0, thats workin great.
<a href="https://ibb.co/f6OX2d"><img src="https://thumb.ibb.co/f6OX2d/29541482_10216565646958469_8683319995895379641_n.jpg" alt="29541482_10216565646958469_8683319995895379641_n" border="0"></a> <a href="https://ibb.co/dAZ0oJ"><img src="https://thumb.ibb.co/dAZ0oJ/29542991_10216565645278427_6955562041658564393_n.jpg" alt="29542991_10216565645278427_6955562041658564393_n" border="0"></a> <a href="https://ibb.co/mHX38J"><img src="https://thumb.ibb.co/mHX38J/33303711_1966988713376157_199401969910022144_n.jpg" alt="33303711_1966988713376157_199401969910022144_n" border="0"></a> <a href="https://ibb.co/mBaO8J"><img src="https://thumb.ibb.co/mBaO8J/33455431_1966988446709517_5621947658856824832_n.jpg" alt="33455431_1966988446709517_5621947658856824832_n" border="0"></a>

Hire is problem PX3 is better for Ford. PX5 don't see Ford Can

 

[nic2k]

Hire is problem PX3 is better for Ford. PX5 don't see Ford Can

What do you mean no PX5 work with Ford?

 

[yaris1]

.

What do you mean no PX5 work with Ford?

no Canbus communication. does not work with Converse, climate control , open and close door. On px3 everything works with out problem.
If there are ready protocols drawn from the Ford, which cooperate with the car and radio on px3. Car has not changed the protocol, only the radio has changed the processor and android from 7.1 to 8.0

 

[LinkseD]

Just total bs...
PX5 is totally working fine in my '18 Focus ST even with the newest 3.06 dmcu and Hal9k Rom.

 

[nic2k]

Thanks for the info. Climate control not working is a big issue for me. Are all PX5 units affected by this or is it specific to one brand? Or do you think it's Android 8.0 that's the issue?

 

[yaris1]

Just total bs...
PX5 is totally working fine in my '18 Focus ST even with the newest 3.06 dmcu and Hal9k Rom.

send photos as proof how does Converse work on your ford and shows you radio stations, AUX or CD INFO. climate control on HU screen. OPEN AND CLOSE DOOR.

---------- Post added at 01:27 PM ---------- Previous post was at 01:16 PM ----------

Thanks for the info. Climate control not working is a big issue for me. Are all PX5 units affected by this or is it specific to one brand? Or do you think it's Android 8.0 that's the issue?

It's hard to say, it could be a px5 problem and it could be Android 8. The problem has not been solved yet. Tested radios are: ISUDAR ERISIN XTRONS WONDEFOO

 

[LinkseD]

This is all i got for now, can upload much more if you want me to...
But it should be proof enough...

(drivers door and trunk open)

This unit btw is a Witson one, currently with MTCE_MX_3.06 and Hal9k Rom v3.1.1