Cannot Load KITKAT 4.4 on my defy + (MB526) ?? Help me pls !!

[kartrikpal]

hello here all , :fingers-crossed:
i have my defy + moded and rooted one, where i was using cm 10 Jb 4.3.2 running smoothly on it . As soon as Kitkat was released by QURAX i made a chech thro ..many threads over here at forum. Lots were posted like only for testing and not for common usage. Though i put update in my SD card and also update 10.1 V4.4 on it.



Rebooted > Entered CW mode Flashed with new update it said it cannot not be done and signature failure > also i made a try with 10.1 directly it made a start and stopped all of sudden. It has cleaned all my data though i had back up of them . Well my doubt is how to properly do it all once again from first .Now i've flased it with GB2.3.6 MB526 firm ..

 

[hotdog125]

hello here all , :fingers-crossed:
i have my defy + moded and rooted one, where i was using cm 10 Jb 4.3.2 running smoothly on it . As soon as Kitkat was released by QURAX i made a chech thro ..many threads over here at forum. Lots were posted like only for testing and not for common usage. Though i put update in my SD card and also update 10.1 V4.4 on it.



Rebooted > Entered CW mode Flashed with new update it said it cannot not be done and signature failure > also i made a try with 10.1 directly it made a start and stopped all of sudden. It has cleaned all my data though i had back up of them . Well my doubt is how to properly do it all once again from first .Now i've flased it with GB2.3.6 MB526 firm ..

From CM10 flash the updated recovery from the 4.4 thread and then flash KitKat.

Sent from my Nexus 7 using Tapatalk

 

[leonardo.porro]

hello here all , :fingers-crossed:
i have my defy + moded and rooted one, where i was using cm 10 Jb 4.3.2 running smoothly on it . As soon as Kitkat was released by QURAX i made a chech thro ..many threads over here at forum. Lots were posted like only for testing and not for common usage. Though i put update in my SD card and also update 10.1 V4.4 on it.



Rebooted > Entered CW mode Flashed with new update it said it cannot not be done and signature failure > also i made a try with 10.1 directly it made a start and stopped all of sudden. It has cleaned all my data though i had back up of them . Well my doubt is how to properly do it all once again from first .Now i've flased it with GB2.3.6 MB526 firm ..

-" and signature failure". Also disable MD5 verification if you didn't copy the MD5 file to your SDCard
To succesfully install gapps I had to remove some ringtones and fonts.

 

[tmcookies]

From CM10 flash the updated recovery from the 4.4 thread and then flash KitKat.

Hi hotdog, i was at this point before, but i still wasn't able to apply the cm11 rom after that. Here is what i did:

I rebooted into 2nd-init, then chose recovery, then custom recovery. There i selected apply zip file from sd, then chose the update-recovery [1], then i rebooted and again went from 2nd-init to custom recovery (by the way, i was expecting it to be a different recovery, but it was the same..) then applied the latest cm11 zip, but that failed with set_metadata_recursively, which (after reading a little about it) seems to still be the problem that should be solved by applying the update-recovery.zip, right?

[1]: http://defy.bytekiste.de/cm11-nightly-defy+/update-recovery.zip

 

[hotdog125]

Hi hotdog, i was at this point before, but i still wasn't able to apply the cm11 rom after that. Here is what i did:

I rebooted into 2nd-init, then chose recovery, then custom recovery. There i selected apply zip file from sd, then chose the update-recovery [1], then i rebooted and again went from 2nd-init to custom recovery (by the way, i was expecting it to be a different recovery, but it was the same..) then applied the latest cm11 zip, but that failed with set_metadata_recursively, which (after reading a little about it) seems to still be the problem that should be solved by applying the update-recovery.zip, right?

[1]: http://defy.bytekiste.de/cm11-nightly-defy+/update-recovery.zip

I think flashing CM10.2, then flashing the update recovery zip and finally the CM11 zip will help.

Sent from my Nexus 7 using Tapatalk

 

[leandrolutz]

hello here all , :fingers-crossed:
i have my defy + moded and rooted one, where i was using cm 10 Jb 4.3.2 running smoothly on it . As soon as Kitkat was released by QURAX i made a chech thro ..many threads over here at forum. Lots were posted like only for testing and not for common usage. Though i put update in my SD card and also update 10.1 V4.4 on it.



Rebooted > Entered CW mode Flashed with new update it said it cannot not be done and signature failure > also i made a try with 10.1 directly it made a start and stopped all of sudden. It has cleaned all my data though i had back up of them . Well my doubt is how to properly do it all once again from first .Now i've flased it with GB2.3.6 MB526 firm ..

Get to CM10.2 again, install update-recovery.zip, REBOOT (without any wipe), get into recovery again and install CM11 and GApps. :cyclops: