Cant Flash back to MR1 from MR2 to get arter, magisk & twrp.

[MarkusGingles]

I can only seem to get into fastboot mode with a Menu saying:
Restart Bootloader
Unlock Bootloader (Unlocked)
Wipe Userdata
Exit
I haven't been able to get to any download mode at all, just this menu and stock recovery, can someone please give me instructions on this? I've gotten different files and ways to root this from many different threads and I'm confused as hell.

Never rooted this RP2 before, it's on latest OTA MR2-RC001-RZR-190914.3123. Got it unlocked before and it's been unlocked for a while but didn't go further with rooting because I got confused and didn't want to brick my expensive phone. Last phone I rooted was back on kitkat or lollipop before I switched to iPhone, so I'm not a total noob just rusty. But Razer got me back to Android and it''s changed alot. I need detailed advice please. :good: And if my instinct is telling me correctly I'd assume something is changed about the bootloader in MR2 thats affecting me right now?

 

[DarkestSpawn]

That menu is the bootloader/download mode.

 

[MarkusGingles]

That menu is the bootloader/download mode.

My issue was not having Bootloader interface installed. Fixed

 

[JDBarlow]

My issue was not having Bootloader interface installed. Fixed

Have you unlocked critical partition?

https://developer.razer.com/razer-p...6.1692205032.1582602359-1206928491.1581902985

Razer recommends you use a USB 3 Type-A to Type-C spec-compliant cable for any device flashing.
THE CABLE THAT CAME WITH THE PHONE WILL NOT WORK.

If you have everything unlocked then make sure you do this

https://s3.amazonaws.com/cheryl-fac...stall_Android_Fastboot_Drivers_on_Windows.pdf
Or install using this tool
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445

If you make it this far then it's a matter of typing in the correct path in fastboot.

fastboot flash boot "arter97 name here".img
Then from the fastboot menu scroll down to boot to recovery or type fastboot reboot recovery

TWRP should boot if you installed the correct kernel.

In TWRP hit cancel then swipe to make modifications and install magisk 20.3

Profit

 

[MarkusGingles]

Have you unlocked critical partition?

https://developer.razer.com/razer-p...6.1692205032.1582602359-1206928491.1581902985

Razer recommends you use a USB 3 Type-A to Type-C spec-compliant cable for any device flashing.
THE CABLE THAT CAME WITH THE PHONE WILL NOT WORK.

If you have everything unlocked then make sure you do this

https://s3.amazonaws.com/cheryl-fac...stall_Android_Fastboot_Drivers_on_Windows.pdf
Or install using this tool
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445

If you make it this far then it's a matter of typing in the correct path in fastboot.

fastboot flash boot "arter97 name here".img
Then from the fastboot menu scroll down to boot to recovery or type fastboot reboot recovery

TWRP should boot if you installed the correct kernel.

In TWRP hit cancel then swipe to make modifications and install magisk 20.3

Profit

Okay so I couldn't flash anything originally simply because i didn't have Bootloader Interface installed. Figured that out and had everything working, unlocked, Arter Kernel 12, Magisk 20.3, EdXposed, and now after I edited build.prop to enable my regular hotspot without carrier permission and reboot. Well now I really can't flash sh?t. Even though I can get into bootloader & Recovery, when I try to fastboot flash MR1 Stock or MR2 stock just to get back into the phone it freezes on the razer logo and eventually reboots and repeats. Then i have to Reflash arter to get back into TWRP after I try to flash anything else which otherwrites Arter97.img. Finally read the red text in TWRP and /data was refusing to mount, fixed that by a basic ass wipe (DUH) Hoping that might have been the issue, my data folder was corrupt or my old data folder was mismatching with the rest of the new roms i tried to flash? Idk someone smarter plz tell me. So far my next attempt is going to be downloading a flashable Stock Deodoxed ZIP to see if flashing from within TWRP now that /Data will mount makes a difference compared to Fastboot. Tried fastboot flashing MR1 and MR2 Normal Razer Stock Rom after data remounted and now i can get to the green vortex/visualizer screen instead of just the Razer Logo before it STILL loops and then when it loops again a second time it sends me to TWRP automatically.

 

[liammc83]

Okay so I couldn't flash anything originally simply because i didn't have Bootloader Interface installed. Figured that out and had everything working, unlocked, Arter Kernel 12, Magisk 20.3, EdXposed, and now after I edited build.prop to enable my regular hotspot without carrier permission and reboot. Well now I really can't flash sh?t. Even though I can get into bootloader & Recovery, when I try to fastboot flash MR1 Stock or MR2 stock just to get back into the phone it freezes on the razer logo and eventually reboots and repeats. Then i have to Reflash arter to get back into TWRP after I try to flash anything else which otherwrites Arter97.img. Finally read the red text in TWRP and /data was refusing to mount, fixed that by a basic ass wipe (DUH) Hoping that might have been the issue, my data folder was corrupt or my old data folder was mismatching with the rest of the new roms i tried to flash? Idk someone smarter plz tell me. So far my next attempt is going to be downloading a flashable Stock Deodoxed ZIP to see if flashing from within TWRP now that /Data will mount makes a difference compared to Fastboot. Tried fastboot flashing MR1 and MR2 Normal Razer Stock Rom after data remounted and now i can get to the green vortex/visualizer screen instead of just the Razer Logo before it STILL loops and then when it loops again a second time it sends me to TWRP automatically.

Have you tried the format data partition ?

 

[JDBarlow]

Okay so I couldn't flash anything originally simply because i didn't have Bootloader Interface installed. Figured that out and had everything working, unlocked, Arter Kernel 12, Magisk 20.3, EdXposed, and now after I edited build.prop to enable my regular hotspot without carrier permission and reboot. Well now I really can't flash sh?t. Even though I can get into bootloader & Recovery, when I try to fastboot flash MR1 Stock or MR2 stock just to get back into the phone it freezes on the razer logo and eventually reboots and repeats. Then i have to Reflash arter to get back into TWRP after I try to flash anything else which otherwrites Arter97.img. Finally read the red text in TWRP and /data was refusing to mount, fixed that by a basic ass wipe (DUH) Hoping that might have been the issue, my data folder was corrupt or my old data folder was mismatching with the rest of the new roms i tried to flash? Idk someone smarter plz tell me. So far my next attempt is going to be downloading a flashable Stock Deodoxed ZIP to see if flashing from within TWRP now that /Data will mount makes a difference compared to Fastboot. Tried fastboot flashing MR1 and MR2 Normal Razer Stock Rom after data remounted and now i can get to the green vortex/visualizer screen instead of just the Razer Logo before it STILL loops and then when it loops again a second time it sends me to TWRP automatically.

Will it not let you flash stock using flash_all.bat file while in fastboot mode?
I would definitely try and start over for sure if possible