Can't get SM-A505FN to install TWRP / SHARP Recovery

Search This thread

EQuak

Member
May 13, 2023
7
2
Steps I've done:
1. Unlocked bootloader, OEM unlock is enabled
2. Downloaded and installed Samsung Drivers
3. Download TWRP / SHARP Recovery
4. Downloaded Odin
5. Got my phone into Download mode (KG State - Checking, FRP - off, OEM LOCK - off)
6. Ran Odin, device detected in Odin
7. Put the tar file into the AP
8. Clicked "Start" in Odin, passed successfully
9. Holding Volume Down, Volume Up & Power Button
10. Released Volume Down on black screen
11. Released Power Button on Samsung logo
12. Still holding Volume Up button

That's how far I was able to come. The device just bootloops itself and I can't get it to open TWRP / SHARP. Got it into download mode again and flashed it with the stock firmware, but want to install custom ROM through the TWRP / SHARP. First time trying to flash custom rom, am I doing something wrong? Any help appreciated.

Reference:
 
  • Like
Reactions: Han-Droid

Sharath Mane

Senior Member
Jul 16, 2017
337
128
Samsung Galaxy A50
You need to connect type c cable to boot into twrp.
Connect your phone to computer or laptop or tv with cable , then use key combination to boot to twrp.
Press power key and volume up at the same time when your phone connected to pc with cable.
 

EQuak

Member
May 13, 2023
7
2
You need to connect type c cable to boot into twrp.
Connect your phone to computer or laptop or tv with cable , then use key combination to boot to twrp.
Press power key and volume up at the same time when your phone connected to pc with cable.
Type C cable has been connected from pc to the phone since booting into download mode, as it is required. Even after exiting the download mode and trying to boot to TWRP the phone is still connected onto it, but it just boot loops.
 

adfree

Senior Member
Jun 14, 2008
10,554
6,130
Samsung Galaxy Watch 4
Samsung Galaxy S22
but it just boot loops

You see some red text... something like only official crap allowed...

Then maybe try other Firmware.... because """funny""" Bootloader...

IMHO similar problem like in this thread...

Only idea....

I can not see your device nor I have Crystal Ball.

Best Regards
 
Steps I've done:
1. Unlocked bootloader, OEM unlock is enabled
2. Downloaded and installed Samsung Drivers
3. Download TWRP / SHARP Recovery
4. Downloaded Odin
5. Got my phone into Download mode (KG State - Checking, FRP - off, OEM LOCK - off)
6. Ran Odin, device detected in Odin
7. Put the tar file into the AP
8. Clicked "Start" in Odin, passed successfully
9. Holding Volume Down, Volume Up & Power Button
10. Released Volume Down on black screen
11. Released Power Button on Samsung logo
12. Still holding Volume Up button

That's how far I was able to come. The device just bootloops itself and I can't get it to open TWRP / SHARP. Got it into download mode again and flashed it with the stock firmware, but want to install custom ROM through the TWRP / SHARP. First time trying to flash custom rom, am I doing something wrong? Any help appreciated.

Reference:
I had the same issue. If u are on the newest binary flash that stock https://samfw.com/firmware/SM-A505FN/DCO/A505FNXXS9CUF1 after set it up w wifi u dont need to log in to a google account and flash ur recovery and it will work
 

Han-Droid

Senior Member
Jun 23, 2010
387
79
Samsung Galaxy A50
OnePlus 7T
Steps I've done:
1. Unlocked bootloader, OEM unlock is enabled
2. Downloaded and installed Samsung Drivers
3. Download TWRP / SHARP Recovery
4. Downloaded Odin
5. Got my phone into Download mode (KG State - Checking, FRP - off, OEM LOCK - off)
6. Ran Odin, device detected in Odin
7. Put the tar file into the AP
8. Clicked "Start" in Odin, passed successfully
9. Holding Volume Down, Volume Up & Power Button
10. Released Volume Down on black screen
11. Released Power Button on Samsung logo
12. Still holding Volume Up button

That's how far I was able to come. The device just bootloops itself and I can't get it to open TWRP / SHARP. Got it into download mode again and flashed it with the stock firmware, but want to install custom ROM through the TWRP / SHARP. First time trying to flash custom rom, am I doing something wrong? Any help appreciated.

Reference:
I got exactly the same problem....no I am facing a bootlooping device.....jay! ... :-(
 

V0latyle

Forum Moderator
Staff member
@EQuak did you read the Stickies before posting in Development?

Your post does not qualify for Development and has been moved to Questions and Answers.

You are REQUIRED to read and follow the Forum Rules!
15. Keep threads / posts on-topic

Whilst a minor amount of off-topic posting may be overlooked, the general rule is that your posts / threads must be relevant to the Forum / thread in which you are posting.
  • General Forums - For news and announcements relating to your device.
  • Q&A Help & Troubleshooting Forums - For all question / request threads and posts. If there is no Q&A Help & Troubleshooting forum, use the General Forum of the relevant device
  • Accessories Forum - For posts related to accessories relevant to the device
  • Development Forums (ones with the word development in the title) - For Developers to post release threads e.g. ROMs and Kernels including modifications to kernels, bootloaders, ROMs, etc., as well as R&D development discussion threads designed with an end goal
  • Themes and Apps Forums - For the posting of Themes and / or Apps as well as announcements & discussions including modifications made to Themes and Apps.
 
  • Like
Reactions: Oswald Boelcke

DracieVajko

Member
May 16, 2023
5
0
Samsung Galaxy A50
Just tried it and it boot loops. I'm gonna try and record a step-by-step video of my process to see if you could spot any mistakes I make during the process, because I'm really at my wits' end.
Did you solved this yet? Im facing same problem, Ive tried about 4 different TWRP and SHRP also but non of them worked. Also first time doing this. Only option I could now do is to flash back some random stock ROM to atleast have functioning phone. But I cannot set up Gpay anymore because it says the device is rooted - And in reality it is not, even system says state of phone as Official. I dont know what to do.
 

EQuak

Member
May 13, 2023
7
2
Did you solved this yet? Im facing same problem, Ive tried about 4 different TWRP and SHRP also but non of them worked. Also first time doing this. Only option I could now do is to flash back some random stock ROM to atleast have functioning phone. But I cannot set up Gpay anymore because it says the device is rooted - And in reality it is not, even system says state of phone as Official. I dont know what to do.
No, I haven't found any solution so far to it since the problem occurred. Guessing It may be caused by a CSC code since we are both form Slovakia? Really don't know...
 

DracieVajko

Member
May 16, 2023
5
0
Samsung Galaxy A50
No, I haven't found any solution so far to it since the problem occurred. Guessing It may be caused by a CSC code since we are both form Slovakia? Really don't know...
I was thinking about it too. Like, my phone is from Orange, so probably there is something which is blocking the whole thing. Only way I was able to install system was through Odin. But for Odin Ive found only stock roms, custom roms work only with TWRP...
 

DracieVajko

Member
May 16, 2023
5
0
Samsung Galaxy A50
No, I haven't found any solution so far to it since the problem occurred. Guessing It may be caused by a CSC code since we are both form Slovakia? Really don't know...
Maybe I found something now. I had one old Galaxy J3 2016, Also from Orange operator as my A50. And it did worked perfectly on the first try and only thing I've did was enabling USB debugging in developer options, which I've forgot on my A50 before. So maybe this could be the problem at least in my scenario? But yet I didn't got time to try it on A50 again.
 

EQuak

Member
May 13, 2023
7
2
Maybe I found something now. I had one old Galaxy J3 2016, Also from Orange operator as my A50. And it did worked perfectly on the first try and only thing I've did was enabling USB debugging in developer options, which I've forgot on my A50 before. So maybe this could be the problem at least in my scenario? But yet I didn't got time to try it on A50 again.
You're a lifesaver, just tried it with the A50 and I successfully booted into TWRP. Definitely works!
Edit: Another thing that may fixed the issue is just not updating the software. I just went through the process of setting it up but right after I booted into the android, I just turned it off and got it into download mode and flashed it with TWRP.
 
Last edited:
  • Like
Reactions: DracieVajko

DracieVajko

Member
May 16, 2023
5
0
Samsung Galaxy A50
You're a lifesaver, just tried it with the A50 and I successfully booted into TWRP. Definitely works!
Edit: Another thing that may fixed the issue is just not updating the software. I just went through the process of setting it up but right after I booted into the android, I just turned it off and got it into download mode and flashed it with TWRP.
Im happy it worked. But sadly for my A50 it still bootloops and nothing, I have no idea why so Im stuck with stock OS on which Google Pay and few Samsung apps wont work cause "phone is rooted" (no it isnt, its on official rom) and since I cant flash TWRP I cant do anything :D Ive also tried your method to quickly set up fresh android (without wifi) and right after I went to reboot and flashing :/
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Steps I've done:
    1. Unlocked bootloader, OEM unlock is enabled
    2. Downloaded and installed Samsung Drivers
    3. Download TWRP / SHARP Recovery
    4. Downloaded Odin
    5. Got my phone into Download mode (KG State - Checking, FRP - off, OEM LOCK - off)
    6. Ran Odin, device detected in Odin
    7. Put the tar file into the AP
    8. Clicked "Start" in Odin, passed successfully
    9. Holding Volume Down, Volume Up & Power Button
    10. Released Volume Down on black screen
    11. Released Power Button on Samsung logo
    12. Still holding Volume Up button

    That's how far I was able to come. The device just bootloops itself and I can't get it to open TWRP / SHARP. Got it into download mode again and flashed it with the stock firmware, but want to install custom ROM through the TWRP / SHARP. First time trying to flash custom rom, am I doing something wrong? Any help appreciated.

    Reference:
    1
    @EQuak did you read the Stickies before posting in Development?

    Your post does not qualify for Development and has been moved to Questions and Answers.

    You are REQUIRED to read and follow the Forum Rules!
    15. Keep threads / posts on-topic

    Whilst a minor amount of off-topic posting may be overlooked, the general rule is that your posts / threads must be relevant to the Forum / thread in which you are posting.
    • General Forums - For news and announcements relating to your device.
    • Q&A Help & Troubleshooting Forums - For all question / request threads and posts. If there is no Q&A Help & Troubleshooting forum, use the General Forum of the relevant device
    • Accessories Forum - For posts related to accessories relevant to the device
    • Development Forums (ones with the word development in the title) - For Developers to post release threads e.g. ROMs and Kernels including modifications to kernels, bootloaders, ROMs, etc., as well as R&D development discussion threads designed with an end goal
    • Themes and Apps Forums - For the posting of Themes and / or Apps as well as announcements & discussions including modifications made to Themes and Apps.
    1
    Maybe I found something now. I had one old Galaxy J3 2016, Also from Orange operator as my A50. And it did worked perfectly on the first try and only thing I've did was enabling USB debugging in developer options, which I've forgot on my A50 before. So maybe this could be the problem at least in my scenario? But yet I didn't got time to try it on A50 again.
    You're a lifesaver, just tried it with the A50 and I successfully booted into TWRP. Definitely works!
    Edit: Another thing that may fixed the issue is just not updating the software. I just went through the process of setting it up but right after I booted into the android, I just turned it off and got it into download mode and flashed it with TWRP.