Can't Re-Flash Kit Kat; Fails after Set Pit File;There is no PIT partition

[Xplorer4x4]

I am trying to root Lollipop on my I537 so I flashed back to KK successfully. Towelroot is successful so I flash LP as instructed using Flashfire but I never got rebooted to download mode. I get stuck on the S4 Active boot screen and the device seems to power down. So I boot to download mode manually and flashed the I537_OC7_Bootloader using odin but still cant get past the Active Boot screen. So I am trying to flash back to KK again. I was able to do this before last night but today I can't seem to get the firmware to flash! Can some one help me?

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!

When I try to flash the I537_OC7_Bootloader it says no pit partition found:

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!

 

[Xplorer4x4]

Ok so I got Odin to flash everything from SGH-I537UCUCNE3_v4.4.2_ATT_ALL and even a pit file i found here. Problem is I get the S4A boot screen and it says booting recovery in blue at the top right but then it dies. Any Ideas? I got Odin to flash by using a USB port on back of my PC on the mobo rather then the front USB ports on the case.

 

[Xplorer4x4]

I also do not have access to stock recovery even after a successful NE3 flash with Odin! Have I bricked my device or just soft bricked it?

 

[Xplorer4x4]

Anyone?