Accessories Cases

[EGM92]

I just ordered a Tudia case and will test to see if UV screen protectors are compatible

Looking at my UV screen protector I noticed the package didn't include the stickers / covers for the ports / buttons. Anyone know what I could use instead?

 

[boontje3]

I just ordered a Tudia case and will test to see if UV screen protectors are compatible

Looking at my UV screen protector I noticed the package didn't include the stickers / covers for the ports / buttons. Anyone know what I could use instead?

I always use painter's tape or electrical tape if there is none with the UV screen protector

 

[cavist]

Received SmartDevil glass set.
First impression was very good, rich box, lots of stuff.

Unfortunately the set is marked OP10Pro even if it fits.
The plastic bracket had foams for glue (nice) but they were glued to the frame and in some places when fitting the phone, the glue from the foam was being left on the phone frame. Also the plastic frame was very tight and did not left that good impression I was hoping for. The glass doesn't have a perfect centering and can be adjusted a bit with finger before the liquid glue will connect with the screen.
For some people this can be nice to have an ability to move screen a little bit but I was expecting a good and tight fit/positioning of the glass from the start.

For me supper annoying was the tight fit into the frame which pressed in the side buttons and my phone was switching on and you cant switch it off while it is in the frame. Just this would make not recommend this product even if it was really a nice bundle overall but details killed it for me and I will not order SD again until it is fixed and have better quality in next iteration.
Got a refund for receiving a product for OP10Pro, not 100% made for OP11, even if the glass fits and is actually the same.

Unfortunately I used up all the masking tape and I also wonder what kind of tape I should by to cover the ports. The one included was ultra tin, with good glue (didnt leave any traces after peeling of). Anybody have a clue what type of tape it was?

I will remove the first glass and will try to apply the glass screen while having a TPU case on to fit the glass perfectly to the case shape.

 

[cavist]

I always use painter's tape or electrical tape if there is none with the UV screen protector

I am worried that electrical tape will leave glue marks, especially for the top speaker/earphone. Often those typical electric tapes for wires and cables have a pretty liberal glue amount on one side.
Painters tape (the yellow paper one?) is not elastic enough to stick to the all the bends and shapes around side buttons IMO.

 

[boontje3]

I am worried that electrical tape will leave glue marks, especially for the top speaker/earphone. Often those typical electric tapes for wires and cables have a pretty liberal glue amount on one side.
Painters tape (the yellow paper one?) is not elastic enough to stick to the all the bends and shapes around side buttons IMO.

never had any issue with it doing around 10-15 phones a week ,
im using this https://www.amazon.com/BOMEI-PACK-Painters-Finishing-Decorative/dp/B0BNKM9QPB
you dont need to tape hole phone yust the holes and speaker
after first 15sec curing with uv remove tape and clean it with isopropyl alcohol after that final cure with uv

 

[EGM92]

Tudia case has arrived. I'm going to try and do the install either later today or tomorrow. Right away I noticed that the edges of the Tudia don't overlap the roundness of the screen which was an issue with the spigen Tough Armor case and UV screen protectors.

 

[cavist]

I ordered new release from imak, black sandstone - want to see how it compares to clear smoke version.

 

[EGM92]

Update: I've installed the UV Glass Screen protector on the OP11, and slipped it into the "
TUDIA DualShield Grip Designed for OnePlus 11 Case 5G (2023), [MergeGrip]" from Amazon and it fits perfectly, the screen isn't lifting up on any of the edges.

 

[Ćwirek]

Today I dropped by accident my OnePlus 11 on concrete and screen is destroyed. Spigen Tough Armor did not help, but I think that any case wouldn't.
Phone is month old... Any ideas how much the screen will cost at OnePlus? I can't find anything on the Internet

 

[EGM92]

Today I dropped by accident my OnePlus 11 on concrete and screen is destroyed. Spigen Tough Armor did not help, but I think that any case wouldn't.
Phone is month old... Any ideas how much the screen will cost at OnePlus? I can't find anything on the Internet

$299.00CAD for Canada

Repair Pricing - OnePlus (Canada)

Learn about the spare parts charges for out-of-warranty phones.

www.oneplus.com

Change the site region address on the URL to find out how much it is in your region.

 

[Ćwirek]

View attachment 5874203
$299.00CAD for Canada

Repair Pricing - OnePlus (Canada)

Learn about the spare parts charges for out-of-warranty phones.

www.oneplus.com

Change the site region address on the URL to find out how much it is in your region.

Thank you, but I think on my region (Poland) this website don't work for some reason. Anyway I called to CTDI repair centre and found out that I will cost 390 euro.
If I had family in Canada it will be cheaper for me to send this phone to them to repair

 

[Pradeep Samgwan]

I personally am not a big fan of cases since I prefer something less bulky but also want my device to be protected from scratches. I see a lot about skins from dbrand and gadgetshieldz these days. I too went for some skins for my One Plus 11R from Gadgetshieldz. I must say, my phone looks aesthetically clean and has been useful for avoiding scratches. The Texture of the skins feels satisfying to hold and provides a good grip. At the moment I am not feeling the need for a case but with the skin being very thin I can always slap a case on it if I need. They also have skins for One Plus 11.

Ive attached few pictures to flex my skins