CF-Root for most I9003 firmwares (updated 28/06/2013)

[ganeshbiyer]

CF-Root for most I9003 firmwares.

- All the credit to Skin for his cf-root and his great help in resolving issues.
- UtterChaos Kernel Credit goes to DoomLord and Napster.
- Cwm 5.0.2.8 (Credit Amit Bagaria)

XWLF2, DDLF2 and XXLE4 will require clean Firmware Flash for the CF-root to work.
If You are already using any other CF-root, these CF-roots won't probably work.
Flash the Firmware again and then flash the CF-root.

Here are the links.

DDMF1-CFROOT-27-06-2013.tar Direct link (credit: LoLaTiOn)

BGMD1-CFROOT-08-06-2013.tar

JPKPH-CFROOT-26-03-2013.tar Mirror

ZCKPL-CFROOT-13-03-2013.tar Mirror

XWLJ2-CFROOT-15-02-2013.tar

POLJ1-CFROOT-08-11-2012.tar Mirror

XWLF3-CFROOT-12-07-2012.tar Mirror

XWLF2_CFROOT-05-07-2012.tar Mirror

DDLF2_CFROOT-05-07-2012.tar Mirror

XXLE4_CFROOT-05-07-2012.tar Mirror

ZHKPE-CFROOT-25-05-2012.tar Mirror

JXKP3-CFROOT-25-05-2012.tar Mirror

XXKPU-CFROOT-29-02-2012.tar Mirror

DDKP3-CFROOT-12-02-2012.tar Mirror

DDKP2-CFROOT-23-12-2011.tar
DDKP1-CFROOT-23-12-2011.tar

XXKPQ-CFROOT-UCK-16-12-2011.tar Mirror
With UC Kernel V6.

CFROOT-XXKPQ-17-11-2011.tar Mirror
Module: tun.ko for XXKPQ.

CF-ROOT-XIKP2-16-11-2011.tar Mirror

CF-ROOT-ZHKPD-11-11-2011.tar
Module: tun.ko for ZHKPD.

CF-ROOT-XXKPN-09-11-2011.tar
Module: tun.ko for XXKPN.

CF-ROOT-XWKPG-08-11-2011.tar Mirror

CF-ROOT-DXKP9-10-11-2011.tar Mirror
Module: tun.ko for DXKP9.

CF-ROOT-ZCKP9-12-11-2011.tar

Flash it with ODIN as PDA.

How To Flash Gingerbread XXKPE 2.3.4 Firmware On Samsung Galaxy SL I9003.

Installing a new rom - This is the way I do it.

I really don't know about other's. But when I am moving to a new rom, I always follow these steps and have never had issues.

• Read the concerned ROM post and if you dont understand ask for installation procedures.
• Take backup of all the apps to external sd card. I prefer titanium backup.
• Powerdown phone and Remove the external sd card.
• Do a factory reset and reboot.
• Start ODIN and fill in the required tabs as per requirement.
  
• Go to Download mode on the phone and connect the phone to pc and ensure that ID:COM shows Yellow.
  
• Flash the firmware and wait until the phone reboots and the odin shows green color.Now you can remove the usb cable.
  
• Once rebooted, do a factory reset again.
• From recovery clear Cache and reboot.

Once all the above are done and you have ensured that the phone is functioning normally, go for the mods.

How to convert to Ext4

1. First make a Nandroid Backup via CWM.
2. Download the Ext4 convertor script here.
3. Copy it to the root of the External Sd Card of the Phone.
4. Go to Recovery.
5. Flash the Ext4 Script. (Pl. Do not reboot the phone after this)
6. Restore the Nandroid backup immediately.
7. Reboot and enjoy Ext4.

How to Un-Root

Download and flash this from recovery. UnRoot.zip

How to port cf-root for all GB firmware (I9003): LINK

Enjoy

Disclaimer : I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE AND DO AT YOUR OWN RISK

 

[vishal24387]

ganesh u really created by ur own...??? Just salute u dude...superb buddy. Do u have kernal coding knowledge???

 

[ganeshbiyer]

I have tested it at my end. Others need to test it too.

 

[ganeshbiyer]

ganesh u really created by ur own...??? Just salute u dude...superb buddy. Do u have kernal coding language???

I use linux at home. So could do it.
I know C/C++ but is not required in this case.

 

[vishal24387]

then ganesh why dont u contact to codeworkx??? He need c, c++ language programmers...

 

[ganeshbiyer]

then ganesh why dont u contact to codeworkx??? He need c, c++ language programmers...

Already got the Dropbox link from him.
I will need to look into it and see if it is within me to do the cm7 thing.

 

[jasspreet]

great ganesh

Sent from my GT-I9003 using xda premium

 

[gagan007]

Installed it, all looked fine until I tried to create a backup. It says can't mount SD Card.dunno why!

 

[mitoVonDido]

thanks for DXKP9 cf-root, amazing work!
will try this

 

[ganeshbiyer]

Installed it, all looked fine until I tried to create a backup. It says can't mount SD Card.dunno why!

I created the backup from 2 times. It worked both the times and restored it.
Are you able to access the sdcard from filemanager.

 

[vishal24387]

Installed it, all looked fine until I tried to create a backup. It says can't mount SD Card.dunno why!

mount sd card via cwm first.

 

[kkrraazzyy]

Nice work ganesh

 

[manrock111]

Thanks for your efforts

Sent from my GT-I9003 using Tapatalk

 

[willydejoe]

possible for new CWM version kpn ?

 

[gentlemenkiller]

thank alot sir.

 

[vivekkalady]

will it support EXT4 ??

 

[adilputera]

thnks man!!

 

[ganeshbiyer]

will it support EXT4 ??

No Man ... not figured it out yet.

 

[Skin1980]

@ganesh

For ext4 take the three modules from my cf-root, open them with an hex editor and search for 2.6.35.7..... then change the part after CL to match with your kernel version.... Good luck!

Inviato dal mio GT-I9100 usando Tapatalk

 

[NgocHaiAG]

CWM can't amount sdcard, data, cache. Please help me.