Hi folks, after repeated attempts at last managed to change Product ID (SKU ID) in hw 6915, here history and how to do this to you. Before the code was from HP Asset viewer http://h18004.www1.hp.com/products/quickspecs/12352_div/12352_div.HTML FA736AA#ABB – Euro English After this procedure my product ID is FA123T#ABA
(thanks Himalaya & Andes developers from this forum for ideas)
need: MTTY
steps:
1: Bootloader
2: mtty
3: task 28 55aa (fully format device)
4: rtask 0 (reset radio)
5: Reflash device
Above from wiki XDA dev's
Important, do not try to start device after above, after radio reset, put device back to bootloader directly
If above does not help you need to reflow or reball radio chip (tested and working if above does not work)
And my result from MTTY:
task 32
USB>password BOOTLOADER
HTCSPass.< YHTCEUSB>info 8
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0x3340000
All Size: 0x7440000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000
USB>info 7
HTC Integrated Re-Flash Utility for bootloader Version:1.50a SABLE EVT version:G.39
MainBoardID = C
Built at: Jun 12 2006 13:46:04
Copyright (c) 1998-2005 High Tech Computer Corporation
Turbo Mode Frequency = 312 MHz
Run Mode Frequency = 208 MHz
Memory Frequency = 208 MHz
SDRAM Frequency = 104 MHz
USB>info 4
HTCS Lњ3ЖHTCE
USB>task 28
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0x3340000
All Size: 0x7440000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000
USB>task 28 55aa
Wait..
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0x33C0000
All Size: 0x74C0000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000
USB>set 14 0
HTCST ЪИТHTCEUSB>set 14 10
HTCSF kEШ(HTCEUSB>set 14 9
HTCSF kEШ(HTCEUSB>
DONT PANYC after NO BOOT-> REFLASH CEOS.nbf (HW6915 ROM FOR G4-121UK) FROM HP Utility.
Info for Pass1:
HTCSPass1.CM€ЛHTCEUSB>password 0000000000000000
Work?
sorry for BAD english
This procedure is free to use but at your own risk, I take no responsiblity for any conflict, fault, or damage caused by this flashing procedure.
(thanks Himalaya & Andes developers from this forum for ideas)
need: MTTY
steps:
1: Bootloader
2: mtty
3: task 28 55aa (fully format device)
4: rtask 0 (reset radio)
5: Reflash device
Above from wiki XDA dev's
Important, do not try to start device after above, after radio reset, put device back to bootloader directly
If above does not help you need to reflow or reball radio chip (tested and working if above does not work)
And my result from MTTY:
task 32
USB>password BOOTLOADER
HTCSPass.< YHTCEUSB>info 8
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0x3340000
All Size: 0x7440000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000
USB>info 7
HTC Integrated Re-Flash Utility for bootloader Version:1.50a SABLE EVT version:G.39
MainBoardID = C
Built at: Jun 12 2006 13:46:04
Copyright (c) 1998-2005 High Tech Computer Corporation
Turbo Mode Frequency = 312 MHz
Run Mode Frequency = 208 MHz
Memory Frequency = 208 MHz
SDRAM Frequency = 104 MHz
USB>info 4
HTCS Lњ3ЖHTCE
USB>task 28
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0x3340000
All Size: 0x7440000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000
USB>task 28 55aa
Wait..
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0x33C0000
All Size: 0x74C0000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000
USB>set 14 0
HTCST ЪИТHTCEUSB>set 14 10
HTCSF kEШ(HTCEUSB>set 14 9
HTCSF kEШ(HTCEUSB>
DONT PANYC after NO BOOT-> REFLASH CEOS.nbf (HW6915 ROM FOR G4-121UK) FROM HP Utility.
Info for Pass1:
HTCSPass1.CM€ЛHTCEUSB>password 0000000000000000
Work?
sorry for BAD english
This procedure is free to use but at your own risk, I take no responsiblity for any conflict, fault, or damage caused by this flashing procedure.
Last edited:
