oh, i was reviewing sgp steinheil not phantomskinz?Updated first post with your review. Thank you for that.
I was going to try a Phantom Skinz, but ended up sticking with no screen protector whatsoever
Clear Full Body Kits and Screen Protectors for Atrix (w/Recommendations and Reviews!)
- Thread starter kmiller8
- Start date
-
- Tags
- body full invisibleshield kit zagg
K
kmiller8
Guest
Fixed, sorry about that, i misread the post you were replying to
no ghost armor love?
Used them on my Aria, and now my Atrix. They are awesome if only for the warranty alone. Great coverage of the phone, great protection, awesome at hiding finger grease on the screen. And if you ever need it replaced they send a new one no questions asked, just mail the old one back to them. Had it on my Aria for 6 months without problems, then switched phones.
Used them on my Aria, and now my Atrix. They are awesome if only for the warranty alone. Great coverage of the phone, great protection, awesome at hiding finger grease on the screen. And if you ever need it replaced they send a new one no questions asked, just mail the old one back to them. Had it on my Aria for 6 months without problems, then switched phones.
K
kmiller8
Guest
I bought this on Ebay Full Body Screen Protector
Installation was time consuming, but its a wet install so there's little room for error. It's been on my phone for 24hours and its still settling/drying up. So far so good, its smooth and doesnt affectg touch performance that much. And it costs $5!!
Installation was time consuming, but its a wet install so there's little room for error. It's been on my phone for 24hours and its still settling/drying up. So far so good, its smooth and doesnt affectg touch performance that much. And it costs $5!!
K
kmiller8
Guest
bought the empire screen protector from amazon for $4 (free 2 day shipping w/ amazon student) and it rocks. there's a ~.5mm border on the sides and ~1mm border on the top, doesn't both me though and its super clear. i got it perfectly aligned on the 2nd lay down with no bubbles or dust (make sure you wipe it down really good with the cloth they send). its easier when you start from the top of the phone instead of the bottom. i oull the whole sticky side protector off, align the top and kind of guide it straight towards the bottom. the card they send removes any bubbles that are there at first. no worries. as long as you cleaned the surface well and theres no dust, you shouldn't have bubbles when you're done. great and inexpensive product (compared to competitors)
How is it holding up against smudges and lindt? Have you taken a key and scratch it to see how sratch resistant it is
K
kmiller8
Guest
Thanks for the review, Changed the topic of the thread to include just Screen Protectors aswell!
Dont get the 6X or 3X screen protectors packs for the atrix on ebay they do not fit properly...
On the other hand, I love my invisible shield... It does make the back a little shinier but other wise, hard to tell that there is something there
EDIT: oops i don't know why, but i always refer to my BSE as invisibile shield... to clarify, I am using best skin ever, not zagg....
On the other hand, I love my invisible shield... It does make the back a little shinier but other wise, hard to tell that there is something there
EDIT: oops i don't know why, but i always refer to my BSE as invisibile shield... to clarify, I am using best skin ever, not zagg....
Last edited:
I was thinking of getting these but they aren't from ebay: http://www.handhelditems.com/motorola-mb860-atrix-crystal-clear-screen-protector-pack-p-159395.html
Does this pack look the same as the one you ordered on ebay?
the ones i got:
http://cgi.ebay.com/ws/eBayISAPI.dl...877511&ssPageName=STRK:MEWNX:IT#ht_2528wt_905
It seems the one you posted have longer cutout for the light sensors, therefore different than the one I got
http://cgi.ebay.com/ws/eBayISAPI.dl...877511&ssPageName=STRK:MEWNX:IT#ht_2528wt_905
It seems the one you posted have longer cutout for the light sensors, therefore different than the one I got
I've just received the SGP Oleophobic screen protector. It took me a whole 2 minutes to install and is totally bubble free. You get 2 protectors in each packet, plus bubble removal card, cleaning cloth and 4 dust removal stickers.
Definitely the most complete screen protector on the market.
And it works!!! Awesome i give it 10/10
Definitely the most complete screen protector on the market.
And it works!!! Awesome i give it 10/10
it doesn't attract lint. its not exactly smudge resistant though. its easier to wipe than the glass though i think, might just be psychological. and i have not tried to scratch it deliberately so idk about that lol its great with no scratches so far thoughHow is it holding up against smudges and lindt? Have you taken a key and scratch it to see how sratch resistant it is
Why did you pick the Oleophobic vs the crystal clear. How's the clarity and the feel of the Oleophobic? Side viewing? Also is it as or more smudge resistance thatn the Atrix's glass? How scratch resistance is it like with nail marks indent and what not? I was thinking of getting the Clear crystal version since most people that have used the SGP used that one. Do you notice the quality of the FF camera lessen because the SGP has the camera covered?
Thanks
K
kmiller8
Guest
added review to first post, Thanks for the contribution to the thread.
K
kmiller8
Guest
What kind of texture does the BSE leave? is it smooth like the original plastic back? or does it add some other kind of texture to it?
definitely not as smooth as stock but not super rubbery either. I really like how it is.. perfect balance of sticky and smooth
I've used InvisibleShield extensively on an iPod Touch, iPhone 3G, and I have to say that the rubbery style screen protectors are probably not the best way to go, for the screen at least. The problem is that these types of protectors are so soft that after an extended amount of time they all inevitably start peeling around the edges. Another problem with InvisibleShield is that the part that goes over the screen is not always 100% percent clear. Sometimes there are little imperfections in the plastic, and those become blatantly obvious when they're lit up by your phone's screen.
I got the SGP Crystal Clear for my Atrix, and I'm much happier with it. It seems like the stiffer plastic would stay on much longer than the floppy wet-apply protectors. Plus, there's no wavy texture to it; it's totally smooth.
I got the SGP Crystal Clear for my Atrix, and I'm much happier with it. It seems like the stiffer plastic would stay on much longer than the floppy wet-apply protectors. Plus, there's no wavy texture to it; it's totally smooth.
So I had the Ghost Armor installed at a mall kiosk last friday. I read good things about it, typically more positive than Zagg and such. It seems Best Skins ever is the best, but I wanted my cover installed by someone, and there isn't a BSE kiosk anywhere in Seattle to my knowledge... I had it installed, and it seemed alright at first. I unfortunately noticed a hair underneath, but since I'm still within the 7 days I thought I'd go get it reinstalled. However, since then I've also noticed pretty significant orange peel, a couple scratches, a large dent that came out of nowhere, some small nicks all over it, some weird vertical streaks all over it....the dent sort of healed itself, but not really, and nothing else is going away. No I've noticed that when I pull it out of my jean pocket (which has nothing else in it) a ton of strange spots/streaks appear on it sort of in the pattern of threads that might be in the pocket. They seem to be going away after a while, but some of them aren't and I don't know what it is...
Overall I've had a pretty lame experience with this ghost armor...but I don't know what else to do with my phone, since the naked Gorilla Glass received two scratches within two weeks of babying this device. Is my first ghost armor a fluke? Should I get it reinstalled hoping that it'll be better, or should I get a refund and get protection from somewhere else? Sorry for the long post, but thanks for reading!
Overall I've had a pretty lame experience with this ghost armor...but I don't know what else to do with my phone, since the naked Gorilla Glass received two scratches within two weeks of babying this device. Is my first ghost armor a fluke? Should I get it reinstalled hoping that it'll be better, or should I get a refund and get protection from somewhere else? Sorry for the long post, but thanks for reading!
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone