[Closed][21.FEB.2011][ADB+CWR][Arne's Extended Kernel v4.0]

[arne182]

GPL:
http://gitorious.org/~arne182/linux-on-wince-htc/arne182s-rafpigna_linux_on_wince_htc
Origional URL: http://forum.xda-developers.com/showthread.php?t=940823
http://gitorious.org/~arne182/linux-on-wince-htc/arne182s-mdj-s-series
Origional URL: http://forum.xda-developers.com/showthread.php?t=831585
/GPL
Here is the final product, hopefully it will be updated in all the kernels soon:
http://gitorious.org/~arne182/linux...mmit/310a8d8f6f71ad920e30b2dfcb5feb2ed56502c4

Paypal Donation <-- ;-)

Important info: After Changing Kernels. Do a complete shutdown and remove the battery and reinsert it to make sure that the new kernel is loaded properly at startup.

CWR works for all roms except 400mb (http://www.multiupload.com/2QJII0HL27) Use link to download the 400mb recovery partition setup.

60 mAh drain issue: New toolchain incompatible with Rafpigna's kernel, Tytung's kernel with new toolchain has same issue.

Use the Ram editions for the RAM Roms!
For the 2300mAh Battery:
Rafpigna_v4.0RAM.rar (11.95 MB) http://www.multiupload.com/MWGMWJYR6H
Rafpigna_v4.0.rar (11.95 MB) http://www.multiupload.com/3TXICK2C7T
mdj_v4.0.rar (11.94 MB) http://www.multiupload.com/6Q4ERYNJIO
mdj_v4.0RAM.rar (11.94 MB) http://www.multiupload.com/C2020FYMXT
For the 2600mAh Battery:
mdj_2600_v4.0.rar (11.94 MB) http://www.multiupload.com/ZMLNGPH2WA
mdj_2600_v4.0RAM.rar (11.94 MB) http://www.multiupload.com/3JYDFRAQJP
Rafpigna_2600_v4.0.rar Comming Soon
Rafpigna_2600_v4.0RAM.rar Comming Soon

These are still in development and should be tested with caution:

Tytung_2300_v1.rar http://www.multiupload.com/HU07DLLD2Z
Tytung_2300_v1RAM.rar http://www.multiupload.com/CPRTL0221T
Tytung_oldcam_2300_v1.rar Comming Soon
Tytung_oldcam_2300_v1RAM.rar Comming Soon


For debugging information Use v3.0:

mdj_v3.0.rar (13.15 MB) http://www.multiupload.com/TJG634H5Q3
rafpigna_v3.0.rar (13.16 MB) http://www.multiupload.com/4E5GTECJAI

 

[arne182]

As soon as the kernel update gets distributed through the channels all Roms will have support. Just give it some time.

Compatibility 3.0:
Working
TyphooN_CM7_v1.8 / v1.9
TyphooN_CM7_v2.0 / 2.1
DL desire HD v1.0
CleanDroid 1.40
MDJ Cyanogenmod 7
Coredroid
DL.DesireZ.v3.5
MDJ Froyo Revolution
MCCM HD V5.1
MarkinuX HD Extra Clean V1.7
RAFDROID GINGER 2.0 ROM
ud 3.0.1
MIUI

Issuse
All Issues Sorted out

Not Working (Follow link below to get 400mb recovery roms to work)
400mb recovery cfg needs to be modified to accommodate a larger kernel http://forum.xda-developers.com/showpost.php?p=11320624&postcount=95


Change Log:

Tytung's v1
Initial Non HTC EB support

4.0
Switched off debugging information.
Finished driver for 2300 and 2600 batteries.

3.0
Fix upside down temperature readings.

2.0
Fixed max temperature at fixed value. But now value is reading wrong way around. Low temps are high and high temps are low.

0.17
Kernel knifing method used for 0.17
http://forum.xda-developers.com/showthread.php?t=896831

RAFPIGNA 1.7NEWOC Kernel base (Quadrant scores are low due to kernel base)
Preliminary Extended battery Support
Fixed 100 to 60% drop from Hastarin kernel, but incorrect after reboot and then correcting at 100% charge back to the right values, (Error in the capacity calculation)
http://forum.xda-developers.com/showthread.php?t=894461

 

[arne182]

Planned developement:

1. Get some Donations in to buy the various extended batteries and calibrate. 25%
2. Gather data from testers Almost Done! v4.0 will have the debugging info switched off.
3. Implement correction curve for exact representation of Voltage, Current, Temperature and mostly Capacity!! 100% complete Done!
4. Combined both kernels into one 100% complete (Detection of eb is very specific and if not found causes a jump in capacity)
Completed thanks to ElBartoME 4. CWM Patch creation Update
5. Integrate back into RAFPIGNA's kernel and other EVO Kernels (MDJ, PRJ) 90% complete update:fix go go go problem
Completed thanks to despy1989 5. Get my Thank meter off 0 Got 125 done now as well.
New 5. Going for a Thank meter reading of 126

 

[F-bone]

interesting work. unfortunately I do not have extended battery to help you out BUT I will get one as soon as you make this work... then some beer

 

[The_Drizzt]

+1

Great! Good work!

 

[despy1989]

Planned developement:

1. Gather data from testers
2. Implement correction curve for exact representation of Voltage, Current and Temperature
3. Combined both kernels into one
4. CWM Patch creation
5. Get my Thank meter off 0

There you go
Your thanks meter is off 0 now

 

[arne182]

interesting work. unfortunately I do not have extended battery to help you out BUT I will get one as soon as you make this work... then some beer

Good to hear. At least then I will have some beer when I am finished with my coding.

 

[arne182]

There you go
Your thanks meter is off 0 now

Thanks Appreciate that

 

[Chris X.]

Great!
Good to hear.
Did my HTC-EB (2300mAh) a few hours ago returned to Seller.
I had tried everything to avoid the drop. (100 to 60)

Now I'm waiting for the new battery (non HTC 2600mAh...eBay) ^^

Greetings

 

[Downy]

Thank you very very much for your efforts.

I'll go and test your kernel as soon as possible and leave you some feedback!

Update

I haven't been able to install your kernel into my MIUI release
After boot, the old kernel is still active.

Error looks like that:

Installing Kernel
Creating directory and mounting /boot...
mkdir failed for /data/boot, File exists
mount: mounting /dev/block/mtdblock0 on /data/boot failed: Invalid argument
Pushing zImage...
2344 KB/s (2448792 bytes in 1.020s)
Remounting system and pushing modules...
remount succeeded
1543 KB/s (260807 bytes in 0.165s)
821 KB/s (16818 bytes in 0.020s)
1430 KB/s (120879 bytes in 0.082s)
Cleaning up...
umount: can't umount /data/boot: Invalid argument
rmdir failed for /data/boot, Directory not empty
All done!
Drücken Sie eine beliebige Taste . . .

Update 2:

Ok, got your kernel loaded by manually performing the steps from the install bat. It looked like rmdir was not recognized as command, I used rm -r instead.
Also the error level alternative didn't work automatically for me, manually mounting with adb shell mount -t yaffs2 -orw,nosuid,nodev /dev/block/mtdblock2 /data/boot worked fine.

The only problem left now is wlan. I pushed the bcm4329.ko file multiple times via adb, also copied it with root explorer but unfortunately wlan always shows me "error" when trying to activate it.
I've seen this before when bcm4329.ko module didn't match kernel version.
Might be related to the mac address, how should I define my wlan mac address? Inside wlan setting it's not showing me any MAC address? This could cause the problem with starting wifi I think.

Maybe you can check this?

 

[Lozone]

Can you please make CWM flashable zip?

I would love to try this.

 

[gentilhomme]

Great work my friend.
I'm using Dandiest DezireZ 3.4 and the original HTC EB is working now.
Again, thanks

 

[Rudyfastcat]

Will test

I will test this Kernel with my daily use ROM -HD2 CoreDroid DHD-.
As you can see from my signature I am already RAFPIGNA 1.7 New OC so this should be a good performance comparison.

Update: Will wait to test-No CWM version available yet...

 

[Rudyfastcat]

Can you please make CWM flashable zip?

I would love to try this.

X1............

 

[leoh]

Can you please make CWM flashable zip?

I would love to try this.

I second that motion... I spent hours trying to make it work with no luck.

 

[jimmyid4]

What will happen if I use normal battery with EB kernel?

 

[hrockh]

What will happen if I use normal battery with EB kernel?

I guess a thermonuclear war... lol
EB Kernel is calibrated with different values for the EB battery, not suitable with the stock battery.

 

[GoCkillaz]

SWEET EB Support! Thanks a bunch man!

 

[hdanhbka]

I love to use this. Everything works fine, but the camera failed. The screen goes dark when i launch Camera. I've tried some other Nands but nothing has changed!

 

[seVIIen]

X1............

+1000

Sent from my HTC HD2 using XDA App