[CLOSED]Gsi P-Q-R fixes + Some fixed Gsis for hi6250 (emui8)

Status
Not open for further replies.
Search This thread

Hami_Do

Senior Member
Aug 24, 2013
376
381
Hi..
Here i share some GSIs manual fixes for hi6250 (emui8) devices as many of them they missed huawei patches or ignored them.

To be honest most credits of the fixes go to our hi6250's active devs Haky , DarkJoker360 , Dil3mm4 & of course Phh.

The fixes made after many comparisons between stock, DSSIs & different GSIs builds & versions.

Gsi Installation:
1 - Wipe system data cache & dalvik
2 - Flash system_arm64_aonly.img in system image partition , boot up & look for bugs
3 - Flash the fix

Fixes could fixe bootloop , sdcards bug ( not detected ) , camera/torch toggle , offline charging , Real battery capacity ( 3000mah ) , GPS and automatic APN detect .

*More posts will be added as updates if any fix successfully tested
 

Attachments

  • Offline_charging_fix_for_GSIs-Hi6250.zip
    6.2 MB · Views: 956
  • SdCards_fix.zip
    159.8 KB · Views: 551
  • Booting_fix_1.zip
    167 KB · Views: 756
  • Gps_and_apn_fix.zip
    213.9 KB · Views: 546
  • Liquid_remix_gsi_Hi6250_Fix.zip
    222.3 KB · Views: 277
  • RR_Gsi_May_SP_booting_2.zip
    5.2 MB · Views: 563
  • Bootleggers_3.0_Gsi_patch_For_Hi6250.zip
    1.8 MB · Views: 334
  • PE_may-build_booting.zip
    5.2 MB · Views: 414
Last edited:

Hami_Do

Senior Member
Aug 24, 2013
376
381
Update : ( only dssi builds )

Possible fast charge fix for p10 lite users who are using dssi PRA ROMs by Haky or by DarkJoker360 following this way :

Using a root explorer go to /etc/init/init.6250.rc and edit values of tow lines :

From 2750 to 4500
write /sys/class/hw_power/charger/direct_charger/iin_thermal 2750

From 1000 to 2000 :
write /sys/class/hw_power/charger/charge_data/iin_thermal 1000

Save/exit/reboot

*Try lower values if fast charge speed seems faster than stock ( use ampere app to compare )
 
Last edited:

sjc0211

Member
May 7, 2011
43
28
Hwaseong
Thank you for sharing these awesome fixes.
I tested some of those on my p10 lite (South Korean single sim variant rebranded to Eurupean dual sim variant).
PixelExperienceP unofficial GSI was bootable after flashing your fix file and also get back offline charging by your fix.
As official PE Pie GSI is expected to be roll out after august, I hope those fixes would also work on that.

Recommend to try!
 
  • Like
Reactions: Hami_Do

Hami_Do

Senior Member
Aug 24, 2013
376
381
Update :

Fix vendor mismatch message every time when booting some dssi/gsi roms like Bootleggers and other roms .
Also this guide fixes CtsProfile=false ( magisk safetynet check ) .

GUIDE :
From magisk download section :
-Flash MagiskHide Props config module
-Flash BusyBox magisk module
-Reboot

Tape in termux ( or any terminal emulator )
Su
Props

According to the menus enter :
1 then f then 7 then 7 then y & y & reboot .
 

Attachments

  • Screenshot_20190729-115611_Termux.png
    Screenshot_20190729-115611_Termux.png
    151.5 KB · Views: 893
  • Screenshot_20190729-115618_Termux.png
    Screenshot_20190729-115618_Termux.png
    119.9 KB · Views: 895
  • Screenshot_20190729-115214_Magisk_Manager.png
    Screenshot_20190729-115214_Magisk_Manager.png
    121.4 KB · Views: 861
  • Screenshot_20190729-115312_Magisk_Manager.png
    Screenshot_20190729-115312_Magisk_Manager.png
    128.7 KB · Views: 819
Last edited:
Sep 19, 2015
27
7
20
Wadowice
Update :

For P8lite/P10lite and should work for other hi6250 devices .

Fix vendor mismatch message every time when booting some dssi/gsi roms like Bootleggers and other roms .
Also this guide fixes CtsProfile=false ( magisk safetynet check ) .

GUIDE :
From magisk download section :
-Flash MagiskHide Props config module
-Flash BusyBox magisk module
-Reboot

Tape in termux ( or any terminal emulator )
Su
Props

Then according to the menus enter :
1 then f then 7 then 7 then y & y & reboot .

In my case it ends up with phone locking like it's been restarted (I can't unlock it with fingerprint, have to enter PIN) after about 2 minutes of using. In my case universal SafetyPatch by hackintosh5 works flawless. Phone shows vendor missmatch warining anyway, but for example I was able to activate phone contactless paymants in my bank app.
 

Hami_Do

Senior Member
Aug 24, 2013
376
381
Update :

HWComposer & blur Fix for GSIs.

So at the moment it's working only on GSI roms.

Here's how to fix blur and hwc:
-Flash the fix and reboot to Android.
-Disable, re-enable and disable again the HW Overlays ( in developer options ), boom blur gone.

Credits: - haky86
- Me for making it flashable & for testing :)
 

Attachments

  • HWComposer-fix.zip
    904 KB · Views: 344
Last edited:

Hami_Do

Senior Member
Aug 24, 2013
376
381
Update :
- Pie -
Fix NFC on GSIs :
- Go to system/app/NfcNci/ and delete the whole folder
- Flash NFC4PRA-GSI-TWRP.zip
Reboot
 

Attachments

  • NFC4PRA-GSI-TWRP.zip
    2.9 MB · Views: 167
  • IMG_20191011_164027_891.jpg
    IMG_20191011_164027_891.jpg
    68.3 KB · Views: 445
Last edited:
  • Like
Reactions: ROO3VER and MIcHiJK

Hami_Do

Senior Member
Aug 24, 2013
376
381
Good news !

Finally camera and flashlight fixed for quack gsi build ( android 10 ) :

- Flash the patch through twrp
- Reboot
 

Attachments

  • Q_cam_patch_hi6250-emui8-.zip
    1.8 MB · Views: 252
  • Screenshot_20191015-022923.png
    Screenshot_20191015-022923.png
    108.3 KB · Views: 532
  • Screenshot_20191015-023035.png
    Screenshot_20191015-023035.png
    94.4 KB · Views: 538
  • Screenshot_20191015-023442.png
    Screenshot_20191015-023442.png
    91.1 KB · Views: 529
Last edited:

MIcHiJK

Senior Member
Feb 13, 2016
439
95
22
Unknown
Idk but it seems working as it should on v203

Oh I was on v202 and had problems. Google maps was just finding my location when WiFi was on. I want to use "Here we go" in offline mode but it wasn't working. There is nothing about GPS in changelog. From what EMUI 8 version are you coming. I flash treble ROMs from the February build.
 
  • Like
Reactions: Hami_Do

Hami_Do

Senior Member
Aug 24, 2013
376
381
Oh I was on v202 and had problems. Google maps was just finding my location when WiFi was on. I want to use "Here we go" in offline mode but it wasn't working. There is nothing about GPS in changelog. From what EMUI 8 version are you coming. I flash treble ROMs from the February build.
I'm on emui of October 2018
Discussions opened here @hi6250group
 
  • Like
Reactions: MIcHiJK

Hami_Do

Senior Member
Aug 24, 2013
376
381
Update Q fixes:

How to fix safetynet issues on phh's Q + msg on booting "there is problem in your device ..." :

-Download UnSu.zip
-Download Termux (or use adb)
-Download magisk phh build ( tested with magisk.phh.v19.3 )

#####

-Place unSu.zip on SD card
-Flash magisk phh build
-In termux, enter:
su
(Grant permission on window)
for termux:
phh-su 0 /system/bin/phh-securize.sh
(Add adb shell if using adb)
-Reboot to twrp, mount /system.
-Go to advanced -> File manager : delete /system/app/bin/phh-su
-Factory reset with twrp.
-Flash magisk phh build, reboot.

#####
For now BasicIntegrity should be fixed (true) + android's msg on booting should gone
#####

-In magisk repository (download section), install magisk hide props and BusyBox
-Reboot
-Install termux (or use adb), and run:
su
props
1
f
7
7
y
Reboot.

#######
CtsProfile should be fixed (true)
#######

Enjoy !

Credits :
@PHHtreble @hi6250group's members
 

Attachments

  • Screenshot_20191110-105211.jpg
    Screenshot_20191110-105211.jpg
    97.8 KB · Views: 383
  • UPDATE-unSU-signed.zip
    5 KB · Views: 130
Last edited:

itsm03

Member
Aug 1, 2015
48
60
Melaka
How to fix io schedy missing "none"

Hi.. How to fix this error?
It's show "none" inside scheduler tab selection
 

Attachments

  • Screenshot_20191119-170806.jpg
    Screenshot_20191119-170806.jpg
    179.6 KB · Views: 278

Hami_Do

Senior Member
Aug 24, 2013
376
381
Update Q fixes :
It seems media broken on all v204 based ROMs I have tested such as LOS 17 , MSM Extended Q ( no sound , no video )

I managed to fix it using the patch bellow , and if media not fixed just open terminal and tap :
su
setprop debug.stagefright.ccodec 0
 

Attachments

  • media_fix_q.v204-1.zip
    7.2 MB · Views: 126
Last edited:
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 15
    Hi..
    Here i share some GSIs manual fixes for hi6250 (emui8) devices as many of them they missed huawei patches or ignored them.

    To be honest most credits of the fixes go to our hi6250's active devs Haky , DarkJoker360 , Dil3mm4 & of course Phh.

    The fixes made after many comparisons between stock, DSSIs & different GSIs builds & versions.

    Gsi Installation:
    1 - Wipe system data cache & dalvik
    2 - Flash system_arm64_aonly.img in system image partition , boot up & look for bugs
    3 - Flash the fix

    Fixes could fixe bootloop , sdcards bug ( not detected ) , camera/torch toggle , offline charging , Real battery capacity ( 3000mah ) , GPS and automatic APN detect .

    *More posts will be added as updates if any fix successfully tested
    10
    Android 10 gsis All in one Fix v1.7 !

    What does this zip contains ?
    Code:
    [CENTER]* NFC fix
    * Offline charging fix
    * Blur graphic composition fix
    * Gps improvements
    * Stock emui fingerprint gestures
    * Selinux boot fixes on recent gsis
    * Build info fixes
    * Laggy overview fixes
    * BT media play fix
    [/CENTER]

    DOWNLOAD

    NOTE: This fix in designed for Emui 8 based devices running phh-treble 10 gsis.

    Thanks to @hamido for the help​
    10
    crDroid_v7.10_11-WAS-21092021

    -Shrinked system.img to the minimum size.
    -Fixed some selinux denials.
    -Fixed GPS / GNSS (Thanks to @AltairFR).
    -Fixed screen recorder.
    -Fixed signal in framework and overlays (workaround).
    -Fixed common gsi bugs for hi6250 (apps crashing, NFC, phone/build infos..).
    -Clean up unnecessary vndk27-28 libraries.
    -Enable call recording (mic & inline conversations).
    -Replaced lineage music app with crdroid music from v7.6 (has scanning folders option).
    -Replaced the Pharaonic logo with crDroid star trek font logo in settings / about phone ;)
    -Added BLN overlay (fixed battery usage and capacity)
    -Added color option in settings / display :
    If there is blur you can fix it by selecting "boosted",
    Or you can set any color to 99% or less in livedisplay settings.

    PS:
    * After first boot & setup go to settings / Apps & notification / default apps /, and set Phone as phone app.

    * To get working GPS : Go outside, and using GPS test app enable GPS, wait about 2 or 3mn till 3D fix is completed, and then it will be fixed permanently.

    * For advanced users : IF you want to edit WAS to PRA or BLN use root explorer text editor and edit latest lines of
    system/etc/prop.default
    and
    system/product/etc/prop/local.prop.

    #Link

    #Installation:
    Using Twrp 0.5 test ( recommended twrp )
    - Wipe system data & cache.
    - Flash crDroid image.
    - Resize system.
    - Optional: Flash gapps (be careful, latest nikgapps seem broken) this version works perfectly.
    -Optional: Flash magisk (rename apk to zip, and after booting, vis versa to install the apk ) from here or here (don't use another version)

    - Reboot.

    See original crDrom #changelog in github :

    Thanks to @eremitein for the awesome gsi , @DarkJoker360 & @AltairFR for some fixes.
    9
    All in one Q GSI patch for WAS and other hi6250 devices (v206 and earlier builds only) :

    * Fixed :

    - Camera
    - Media ( sound & video )
    - NFC
    - Battery usage
    - Model, build number, phone Info ..
    - Auto brightness
    - Offline charging (requires permissive kernel)

    * Installation :

    1 - Flash gsi , boot up to system
    2 - Reboot to twrp & resize system through twrp's advanced wipe menu
    3 - Flash AIO fix
    4 - Boot to system and check if bugs fixed

    * The fix only for emui 8.
    * Tested on GSIs based on v204.
    * The fix contains WAS's infos , so if you use it for PRA , RNE or other hi6250 you need to open the patch & edit latests lines in system/product/etc/prop/local.prop according to your stock.
    * Resize system before applying the patch ( in most cases )

    # Some screenshots from latest fixed Havoc 3.0 based on v204 .
    9
    Finally magisk working on a-only R gsis :cowboy:
    After debugging kmsg , bootloop was caused by missing sepolicy from system_ext ..

    Installation:
    1- Install magisk apk
    2- Go to twrp & flash MAGISKA11-a-only
    3- Flash Magisk-v22-canary-phh
    4- Reboot and enjoy