[CLOSED][KERNEL+Touch CWM][SGS-SCL]{v15} Team UtterChaos Kernel (UC-Kernel)[XXKPQ]

Maximum overclock level?

  • 1100 MHz

    Votes: 3 4.3%
  • 1200 MHz

    Votes: 22 31.4%
  • 1300 MHz

    Votes: 20 28.6%
  • 1380 MHz

    Votes: 27 38.6%

  • Total voters
    70
  • Poll closed .
Status
Not open for further replies.
Search This thread

Napstar

Inactive Recognized Developer
Aug 20, 2011
398
1,097
Pune
---- [ UPDATE ] ----

kernel v15 with stable OC and fixed GPS posted here


---- [ UPDATE ] ----



[ info ]

hello everyone,

we present to you Team UtterChaos Kernel (UC-Kernel)...

this kernel will be maintained by:
  • DooMLoRD
  • Napstar



THANKS TO ALL WHO DONATED THE DEVICE FOR US TO WORK ON!



[ special thanks ]

vishal24387 - for encouraging the user community and striving hard to see more devs work on this device
ganeshbiyer - for helping me get acquainted with SGS-SCL stuff



[ screenshots ]


SC20120521-010949.png
GSL_v15.png
attachment.php

attachment.php
attachment.php
attachment.php



[ Video for Full Touch CWM recovery ]

[ disclaimer/WARNING ]

THE KERNEL IS STILL IN TESTING... PROCEED WITH CAUTION! U HAVE BEEN WARNED!

WE ARE NOT TO BE HELD RESPONSIBLE IF U DAMAGE UR PHONE / SPILL UR COFFEE / MISS UR ALARMS / ANY OTHER CALAMITY/MISHAP


[ features/changelog ]

  • [ v15 onwards ] Removed 1380MHz frequency and added 1350MHz instead
  • [ v15 onwards ] Provided Smartreflex nvalues to all intermediate frequencies, which will calibrate voltages as per each device requirement and should provide stable OC experience
  • [ v15 onwards ] Respecting cpufreq policy in any condition
  • [ v15 onwards ] Fix multiple Home button presses
  • [ v15 onwards ] Disabled LED driver suspend in sleep mode for bln - should allow using modified services.jar and liblights.so for BLN support
  • [ v15 onwards ] Fixed GPS - thanx to loSconosciuto
  • [ v15 onwards ] Fixed touch based CWM recovery further :cowboy:
  • [ v14 onwards ] Implemented VDD SYSFS. Support to change VDD levels using shell environment.
  • [ v14 onwards ] Further corrected voltages and DSP frequency which should fix problems with video playing, recording etc.
  • [ v13 onwards ] Implemented kernel level control for boot-time cpufreq. Now kernel will boot with default maximum cpufreq of 1000MHz and lower cpufreq limit of 300MHz. :)
  • [ v13 onwards ] Corrected voltages and DSP frequency which should fix problems with video playing, recording etc.
  • [ v13 onwards ] Corrected sync bug fix again which had got messed up during kernel sources upgrade ;)
  • [ v12 onwards ] implemented slightly better CPU freq thresholding at boot-up - this will reduce the time the CPU is at max frequency... this is still not implemented at kernel level but we are working on it
  • [ v12 onwards ] merged GT-I9003_SWA_GB_Opensource_Update1 kernel sources
  • [ v11 onwards ] added lots of intermediate frequencies (120-200-300-400-500-600-700-800-900-1000-1100-1200-1300-1350-1380)
  • [ v11 onwards ] updated to newer patched ZRAM (details on how to use it are here)
  • [ v11 onwards ] added ZCACHE, FRONTSWAP and updated CLEANCACHE to properly support ext3/ext4
  • [ v10 onwards ] fixed sync bug related to notifications
  • [ v10 onwards ] Added extra cpufrequency bins. Current table has;
    • 120 MHz
    • 300 MHz
    • 600 MHz
    • 800 MHz
    • 1000 MHz
    • 1100 MHz
    • 1200 MHz
    • 1300 MHz
    • 1350 MHz
    • 1380 MHz (not fully stable)
  • [ v09 onwards ] fixed bootup clock speeds - all kernels will by default ALWAYS bootup at 1.0GHz max & 300MHz min CPU frequency
  • [ v09 onwards ] some changes in CF-Root ramdisk - reverted to 24-11-2011 CF-Root ramdisk by amit
  • [ v09 onwards ] some minor graphics changes in our touch based recovery - using graphics from CWM5.5 (ICS) and changed the images of the navigation buttons
  • [ v09 onwards ] recovery will now backup & restore (if boot.img was previously backed up) kernel too (boot partition)
  • [ v09 onwards ] updated ramzswap driver to newest zram driver and enabled it
  • [ v09 onwards ] added & enabled cleancache driver
  • [ v09 onwards ] testing some CPU overclocks upto 1.3GHz
  • [ v08-fix onwards ] fixed some issues on OC version
    • Issue with video recording
    • Issue with playback of 720p video using hardware decoding
    • Usage of 200MHz cpu frequency
  • [ v08 onwards ] CPU clock-frequency overclocked to 1.2GHz
  • [ v08 onwards ] CPU clock-frequency underclocked to 200MHz with undervolting
  • [ v07 onwards ] added new CPU governors:
    • Lionheart
    • Lazy
  • [ v07 onwards ] updated to latest (as of 27-Dec) CF-Root by amit.bagharia
  • [ v07 onwards ] maintaining separate kernels for overclocked (OC) and non-overclocked (non-OC) features (GPU & CPU)
  • [ v06 onwards ] optimized CPU governors
  • [ v05 onwards ] testing GPU overclocking
  • [ v04 onwards ] Overclock upto 1.1Ghz
  • [ v03 onwards ] kernel now compressed using LZMA
  • [ v03 onwards ] enabled support for EXT4 file system (had missed that one in v02)
  • [ v03 onwards ] updated CWM (by amit) to latest version (24-11)
  • [ v03 onwards ] kernel will now show custom bootlogo (if enabled by user); and allow users to place their own logo (if they want or revert to logo in kernel) [ DETAILS HERE ]
  • [ v03 onwards ] added support for userinit scripts:
    • if sd-ext is mounted then it will execute /sd-ext/userinit.sh & shell scripts in /sd-ext/userinit.d/ folder
    • also scripts in /data/local/ will be executed... it will execute /data/local/userinit.sh & shell scripts in /data/local/userinit.d/ folder
  • [ v02 onwards ] shifted to TinyRCU kept it as default
  • [ v02 onwards ] enabled support for various file systems
    • EXT3
    • JBD
    • RFS
    • JFS
    • NTFS (with R/W)
  • [ v02 onwards ] TUN/TAP now integrated into kernel
  • [ v02 onwards ] enabled support for various network file systems
    • NFS (client/server)
    • CIFS
  • [ v02 onwards ] optimized kernel for size
  • [ v02 onwards ] enabled LZMA/GZ2/LZO compressing support for ramdisk
  • [ v02 onwards ] bumped jHash to v3
  • [ v02 onwards ] increased VM MAX READAHEAD to 512KB
  • [ v02 onwards ] corrected "current kernel" string in CWM app & Tweaks app
  • [ v01 onwards ] Universal CF-Root and CWM for I9003 Gingerbread by amit.bagaria
  • [ v01 onwards ] CPU Governors
    1. InteractiveX
    2. Savaged-Zen
    3. SmartAssV2
    4. BrazilianWax
    5. Smoothass
    6. Lagfree
    7. Smartass
    8. Scary
    9. MinMax
    10. Interactive
  • [ v01 onwards ] I/O Schedulers
    1. BFQ-v2-rc1
    2. V(R)
    3. SIO

IMPORTANT NOTE REGARDING FEATURES



[ credits for features ]


thank you all for ur work!



[ requirements ]




how to install our kernel OR get back to stock kernel



[ my kernel sources ]

https://github.com/DooMLoRD/SGS-SL-i9003



[ donations ]

if u feel that this work has helped u OR u think that the work i put into making this is worthy of donations, then click on the following link for buying me some coffee/beer/etc ;) PAYPAL DONATION LINK



[ downloads ]


download links are posted here



< OLD RELEASES >




BEFORE U ASK A QUESTION OR POST AN "ISSUE" read this: FAQs & TIPs

and

A Guide to Raising a Problem/Bug Report



icon8.gif



enjoy!
 
Last edited:

DooMLoRD

Inactive Recognized Developer
Jul 27, 2010
13,191
39,707
Pune
How to Install our kernel OR go back to stock kernel

If u want to flash kernels on device (without need of PC) check this: Flashing kernels using MobileODIN


[ how to install our kernel ]

  1. download the kernels's .tar file
  2. check the md5hash of the file to ensure file integrity
  3. reboot device into Download mode
  4. connect to PC via USB cable
  5. start ODIN
  6. make sure that device is detected
  7. click on PDA and select the file u downloaded
  8. now click start
  9. after flashing is successful the device will reboot
  10. enjoy our kernel!

[ how to get back to stock kernel ]

  1. download the file given below
  2. check the md5hash of the file to ensure file integrity
  3. reboot device into Download mode
  4. connect to PC via USB cable
  5. start ODIN
  6. make sure that device is detected
  7. click on PDA and select the file u downloaded
  8. now click start
  9. after flashing is successful the device will reboot
  10. you will now be back on stock kernel


Download links for Stock Kernel

XXKPQ ONLY
MD5HASH: 2ae4b0e635ab21a64c6ea68ca42cdf0c
 
Last edited:

DooMLoRD

Inactive Recognized Developer
Jul 27, 2010
13,191
39,707
Pune
FAQs & TIPs



[ FAQs ]


[ Q ] will i lose all my data if i flash this kernel?
Ans: NO


[ Q ] I flashed the kernel and now my device is stuck at bootanimation!
Ans: are u sure that u are on the correct firmware? only XXKPQ is currently supported. try a fresh flash of full XXKPQ firmware and then flash our kernel.


[ Q ] how do i know that the kernel is correctly flashed? how do i identify kernel version?
Ans: check about phone, u will see something like THIS. the kernel version will read as:

2.6.35.7-CL709629
DooMLoRD@UtterChaos #1

  • -CL709629 - indicates the version string for XXKPQ
  • DooMLoRD - indicates the person who compiled the kernel, it will be either me (DooMLoRD) or Napstar
  • UtterChaos - indicates the name of our Team (UtterChaos)
  • #1 - indicates the kernel release version


[ Q ] Will you be creating a kernel for firmware XYZ?
Ans: NO. we will stick only to the most used/most recent firmware.


[ Q ] When will you add XYZ feature?
Ans: We cannot comment on addition of any particular feature, also currently dont have any fixed timeline.


[ Q ] when will you release the new version of kernel?
Ans: DO NOT ASK FOR ETA, RELEASE TIME... when we think its ready it will be released....


[ Q ] Can u give us a small idea about new features which are being added?
Ans: DO NOT ASK FOR LIST OF NEW FEATURES... we are trying our best to get the best of features working for this device... when we are ready u will get new kernel to play with...


[ Q ] oohh this kernel has so many features.... wht does this mean? how does it help? how is it useful to me?
Ans: check the TIPs section for links to some relevant threads/post which explain more abt this. also if that isnt wht u looking for SEARCH ON GOOGLE.


[ Q ] guys i love ur work!! can i add u on facebook/twitter?
Ans: glad u appreciate it but NO... we do not encourage FANBOYISM :D though we happily accept donations to continue our kickass work ;)



IF WE SEE ANY OF THE SAME QUESTIONS BEING REPEATED, WE WILL IGNORE YOU POST




[ TIPs ]

useful links and tips will be added here

Useful info on CPU governors and I/O Schedulers
General Q&A thread for users of this kernel
VVVIMP: before u report any battery drain issues please read this:
[GUIDE] HOW-TO Properly Evaluate Battery Life and Provide Useful Reports
 
Last edited:

DooMLoRD

Inactive Recognized Developer
Jul 27, 2010
13,191
39,707
Pune
How to change bootlogo/bootscreen

How to change bootlogo/bootscreen

Our kernel (v03 onwards) comes with its own bootlogo/bootscreen... but to enable that bootlogo/bootscreen u need to separately flash a file via ODIN...

This basically is based on what Skin1980 had posted to modify bootlogo...


[ how to enable loading custom bootlogo ]

  • first download modifier-XXKPQ-bootlogo.tar
  • check the md5hash of the file to ensure file integrity
  • reboot device into Download mode
  • connect to PC via USB cable
  • start ODIN
  • make sure that device is detected
  • click on PDA and select the file u downloaded
  • now click start
  • after flashing is successful the device will reboot
  • now flash our kernel!


[ how to have ur own custom bootlogo ]

  • this can be done ONLY after u flash the modifier
  • u need a 480x800 image and it has to be in JPEG format
  • the file should be called as logo.jpg and has to be saved in /mnt/.lfs/
  • thats it reboot device to see ur own logo


[ how to disable loading custom bootlogo ]

  1. first download stock-XXKPQ-bootlogo.tar
  2. check the md5hash of the file to ensure file integrity
  3. reboot device into Download mode
  4. connect to PC via USB cable
  5. start ODIN
  6. make sure that device is detected
  7. click on PDA and select the file u downloaded
  8. now click start
  9. after flashing is successful the device will reboot
  10. now custom bootlogo will be disabled!


[ download links ]


Modifier XXKPQ
MD5HASH: fd95a5097ec37911023b23df08f53fa4

Stock XXKPQ
MD5HASH: 0a2a8a45c4b44cbbf170e3b85ff748dd


[ troubleshooting ]

  • at first u may need to reboot 2 or 3 times to see our custom bootlogo
  • if even after flashing the modifier u are unable to see our custom bootlogo OR if u want to revert back to our bootlogo; then:
    1. once device boots start RootExplorer
    2. go to the folder /data/local/tmp/
    3. delete the file uckernelbootlogo
    4. reboot device
    this will force the kernel to push our logo to /mnt/.lfs/
 

Attachments

  • modifier-XXKPQ-bootlogo.tar
    610 KB · Views: 1,788
  • stock-XXKPQ-bootlogo.tar
    610 KB · Views: 692
Last edited:

kancilpintar

Senior Member
Jul 29, 2011
79
26
Kuala Lumpur
Thanks for the quick job guys. Just finished reading the guide about Governor and Scheduler. To others, PLEASE READ before posting questions. Will try this after I finish backing up. Happy kernel flashing guys :cool:
 

podanimesh

Senior Member
Jun 2, 2011
423
122
kolkata
hey doomlord no offence but it would be great if u could make a kernel for KPM also because der r many people still using KPM because of no use of going to KPQ..
 
Last edited:

manrock111

Senior Member
May 9, 2011
995
143
Internet
hey doomlord no offence but it would be great if u could make a kernel for KPM also because der r many people still using KPM because of no use of going to KPQ..

no im and many using kpq now.

now it is the time to get together to one firmware.


In General latest one is good one so i think kpq is good to working on.

If possible is there any universal kernel thing exist?
 
  • Like
Reactions: wicki30

podanimesh

Senior Member
Jun 2, 2011
423
122
kolkata
UPDATE:i have flashed it on KPM only thing is wi-fi when i turn on my phone restarts.
till now no problems hope that wi-fi fix should be esy.
 

DooMLoRD

Inactive Recognized Developer
Jul 27, 2010
13,191
39,707
Pune
hey doomlord no offence but it would be great if u could make a kernel for KPM also because der r many people still using KPM because of no use of going to KPQ..

firstly:
do not quote such big posts...


secondly:
we will see... ganesh had informed me that KPQ is most used... so i created & tested the kernel on that one...


anyways u can try flashing XXKPQ kernel on that... check if it works... if XXKPM is 2.3.6 then i think our kernel will work on it too :)

try it out
 

ooikaisheng529

Senior Member
Nov 22, 2011
219
402
Bukit Mertajam, Penang
dunno if it was juz my problem or something...actually i'm using your kernel right now i'm facing a little issue that is every time i turned on the wifi the phone reboots
i followed all your steps when flashing and sorry if this post is in the wrong place
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 115
    ---- [ UPDATE ] ----

    kernel v15 with stable OC and fixed GPS posted here


    ---- [ UPDATE ] ----



    [ info ]

    hello everyone,

    we present to you Team UtterChaos Kernel (UC-Kernel)...

    this kernel will be maintained by:
    • DooMLoRD
    • Napstar



    THANKS TO ALL WHO DONATED THE DEVICE FOR US TO WORK ON!



    [ special thanks ]

    vishal24387 - for encouraging the user community and striving hard to see more devs work on this device
    ganeshbiyer - for helping me get acquainted with SGS-SCL stuff



    [ screenshots ]


    SC20120521-010949.png
    GSL_v15.png
    attachment.php

    attachment.php
    attachment.php
    attachment.php



    [ Video for Full Touch CWM recovery ]

    [ disclaimer/WARNING ]

    THE KERNEL IS STILL IN TESTING... PROCEED WITH CAUTION! U HAVE BEEN WARNED!

    WE ARE NOT TO BE HELD RESPONSIBLE IF U DAMAGE UR PHONE / SPILL UR COFFEE / MISS UR ALARMS / ANY OTHER CALAMITY/MISHAP


    [ features/changelog ]

    • [ v15 onwards ] Removed 1380MHz frequency and added 1350MHz instead
    • [ v15 onwards ] Provided Smartreflex nvalues to all intermediate frequencies, which will calibrate voltages as per each device requirement and should provide stable OC experience
    • [ v15 onwards ] Respecting cpufreq policy in any condition
    • [ v15 onwards ] Fix multiple Home button presses
    • [ v15 onwards ] Disabled LED driver suspend in sleep mode for bln - should allow using modified services.jar and liblights.so for BLN support
    • [ v15 onwards ] Fixed GPS - thanx to loSconosciuto
    • [ v15 onwards ] Fixed touch based CWM recovery further :cowboy:
    • [ v14 onwards ] Implemented VDD SYSFS. Support to change VDD levels using shell environment.
    • [ v14 onwards ] Further corrected voltages and DSP frequency which should fix problems with video playing, recording etc.
    • [ v13 onwards ] Implemented kernel level control for boot-time cpufreq. Now kernel will boot with default maximum cpufreq of 1000MHz and lower cpufreq limit of 300MHz. :)
    • [ v13 onwards ] Corrected voltages and DSP frequency which should fix problems with video playing, recording etc.
    • [ v13 onwards ] Corrected sync bug fix again which had got messed up during kernel sources upgrade ;)
    • [ v12 onwards ] implemented slightly better CPU freq thresholding at boot-up - this will reduce the time the CPU is at max frequency... this is still not implemented at kernel level but we are working on it
    • [ v12 onwards ] merged GT-I9003_SWA_GB_Opensource_Update1 kernel sources
    • [ v11 onwards ] added lots of intermediate frequencies (120-200-300-400-500-600-700-800-900-1000-1100-1200-1300-1350-1380)
    • [ v11 onwards ] updated to newer patched ZRAM (details on how to use it are here)
    • [ v11 onwards ] added ZCACHE, FRONTSWAP and updated CLEANCACHE to properly support ext3/ext4
    • [ v10 onwards ] fixed sync bug related to notifications
    • [ v10 onwards ] Added extra cpufrequency bins. Current table has;
      • 120 MHz
      • 300 MHz
      • 600 MHz
      • 800 MHz
      • 1000 MHz
      • 1100 MHz
      • 1200 MHz
      • 1300 MHz
      • 1350 MHz
      • 1380 MHz (not fully stable)
    • [ v09 onwards ] fixed bootup clock speeds - all kernels will by default ALWAYS bootup at 1.0GHz max & 300MHz min CPU frequency
    • [ v09 onwards ] some changes in CF-Root ramdisk - reverted to 24-11-2011 CF-Root ramdisk by amit
    • [ v09 onwards ] some minor graphics changes in our touch based recovery - using graphics from CWM5.5 (ICS) and changed the images of the navigation buttons
    • [ v09 onwards ] recovery will now backup & restore (if boot.img was previously backed up) kernel too (boot partition)
    • [ v09 onwards ] updated ramzswap driver to newest zram driver and enabled it
    • [ v09 onwards ] added & enabled cleancache driver
    • [ v09 onwards ] testing some CPU overclocks upto 1.3GHz
    • [ v08-fix onwards ] fixed some issues on OC version
      • Issue with video recording
      • Issue with playback of 720p video using hardware decoding
      • Usage of 200MHz cpu frequency
    • [ v08 onwards ] CPU clock-frequency overclocked to 1.2GHz
    • [ v08 onwards ] CPU clock-frequency underclocked to 200MHz with undervolting
    • [ v07 onwards ] added new CPU governors:
      • Lionheart
      • Lazy
    • [ v07 onwards ] updated to latest (as of 27-Dec) CF-Root by amit.bagharia
    • [ v07 onwards ] maintaining separate kernels for overclocked (OC) and non-overclocked (non-OC) features (GPU & CPU)
    • [ v06 onwards ] optimized CPU governors
    • [ v05 onwards ] testing GPU overclocking
    • [ v04 onwards ] Overclock upto 1.1Ghz
    • [ v03 onwards ] kernel now compressed using LZMA
    • [ v03 onwards ] enabled support for EXT4 file system (had missed that one in v02)
    • [ v03 onwards ] updated CWM (by amit) to latest version (24-11)
    • [ v03 onwards ] kernel will now show custom bootlogo (if enabled by user); and allow users to place their own logo (if they want or revert to logo in kernel) [ DETAILS HERE ]
    • [ v03 onwards ] added support for userinit scripts:
      • if sd-ext is mounted then it will execute /sd-ext/userinit.sh & shell scripts in /sd-ext/userinit.d/ folder
      • also scripts in /data/local/ will be executed... it will execute /data/local/userinit.sh & shell scripts in /data/local/userinit.d/ folder
    • [ v02 onwards ] shifted to TinyRCU kept it as default
    • [ v02 onwards ] enabled support for various file systems
      • EXT3
      • JBD
      • RFS
      • JFS
      • NTFS (with R/W)
    • [ v02 onwards ] TUN/TAP now integrated into kernel
    • [ v02 onwards ] enabled support for various network file systems
      • NFS (client/server)
      • CIFS
    • [ v02 onwards ] optimized kernel for size
    • [ v02 onwards ] enabled LZMA/GZ2/LZO compressing support for ramdisk
    • [ v02 onwards ] bumped jHash to v3
    • [ v02 onwards ] increased VM MAX READAHEAD to 512KB
    • [ v02 onwards ] corrected "current kernel" string in CWM app & Tweaks app
    • [ v01 onwards ] Universal CF-Root and CWM for I9003 Gingerbread by amit.bagaria
    • [ v01 onwards ] CPU Governors
      1. InteractiveX
      2. Savaged-Zen
      3. SmartAssV2
      4. BrazilianWax
      5. Smoothass
      6. Lagfree
      7. Smartass
      8. Scary
      9. MinMax
      10. Interactive
    • [ v01 onwards ] I/O Schedulers
      1. BFQ-v2-rc1
      2. V(R)
      3. SIO

    IMPORTANT NOTE REGARDING FEATURES



    [ credits for features ]


    thank you all for ur work!



    [ requirements ]




    how to install our kernel OR get back to stock kernel



    [ my kernel sources ]

    https://github.com/DooMLoRD/SGS-SL-i9003



    [ donations ]

    if u feel that this work has helped u OR u think that the work i put into making this is worthy of donations, then click on the following link for buying me some coffee/beer/etc ;) PAYPAL DONATION LINK



    [ downloads ]


    download links are posted here



    < OLD RELEASES >




    BEFORE U ASK A QUESTION OR POST AN "ISSUE" read this: FAQs & TIPs

    and

    A Guide to Raising a Problem/Bug Report



    icon8.gif



    enjoy!
    48
    It looks like, it is high time to shift to ics. ;)

    Ok, guys. we will start working on porting our kernel for other rom. :)





    @ UC team

    Guys I know that u are working with alot of hard work for making stock kernel much much better with good features. But except vurrut no one is specifically creating kerels for AOSP roms. Now a days no one is using (or very few people are using it) cm7 or GB based miui roms. Everyone is excited about ICS based Dhiru's cm9 rom. But he is also alone working on it & he is struggling alot to make it a daily usable rom. But we can't expect everything from him on such tough development of cm9 which includes new drivers, wifi problems, most tough development of kernel 3.0 & many more problems.
    We all expect from u guys that please help Dhiru by working on ICS kernel. Also many users seriously facing blacklight issue which causes a heavy battery drain on cm7 & now on cm9 roms. So please take a look into that also. We all will be thankful to u :)

    Thank You

    Regards
    VISHAL



    Sent from my GT-I9003 using XDA
    35
    How to Install our kernel OR go back to stock kernel

    If u want to flash kernels on device (without need of PC) check this: Flashing kernels using MobileODIN


    [ how to install our kernel ]

    1. download the kernels's .tar file
    2. check the md5hash of the file to ensure file integrity
    3. reboot device into Download mode
    4. connect to PC via USB cable
    5. start ODIN
    6. make sure that device is detected
    7. click on PDA and select the file u downloaded
    8. now click start
    9. after flashing is successful the device will reboot
    10. enjoy our kernel!

    [ how to get back to stock kernel ]

    1. download the file given below
    2. check the md5hash of the file to ensure file integrity
    3. reboot device into Download mode
    4. connect to PC via USB cable
    5. start ODIN
    6. make sure that device is detected
    7. click on PDA and select the file u downloaded
    8. now click start
    9. after flashing is successful the device will reboot
    10. you will now be back on stock kernel


    Download links for Stock Kernel

    XXKPQ ONLY
    MD5HASH: 2ae4b0e635ab21a64c6ea68ca42cdf0c
    35
    UC Kernel v09 (test kernels) released!

    UC Kernel v09 (test kernels) released!


    we will be testing further CPU overclocking with this series...



    [ screenshots ]

    attachment.php
    attachment.php
    attachment.php




    [ changelog ]

    1. fixed bootup clock speeds - all kernels will by default ALWAYS bootup at 1.0GHz max & 300MHz min CPU frequency
    2. some changes in CF-Root ramdisk - reverted to 24-11-2011 CF-Root ramdisk by amit
    3. some minor graphics changes in our touch based recovery - using graphics from CWM5.5 (ICS) and changed the images of the navigation buttons
    4. recovery will now backup & restore (if boot.img was previously backed up) kernel too (boot partition)
    5. updated ramzswap driver to newest zram driver and enabled it
    6. added & enabled cleancache driver
    7. testing some CPU overclocks upto 1.3GHz (cpu frequency for each version is given below)
      • #1009 - 300/600/800/1000/1200
      • #2009 - 300/600/800/1000/1250
      • #3009 - 300/600/800/1000/1300


    [ NOTE ]

    1. we will revert to newest CF-Root ramdisk later... due to some technical issues we cant include that in this release...
    2. version #1009 will be the most stable of the lot... other kernels are provided for testing purposes only!
    3. version #3009 is overvolted to have stability at 1.3GHz we can optimize the voltages later
    4. i havent had time to do a thorough testing... we are depending on the users feedback...
    5. it appears the "fix_permissions" feature in CWM recovery is broken, i have fixed it in our sources... it will work correctly from next release...


    [ download links ]


    KINDLY DO NOT MIRROR OUR FILES


    UC-KERNEL-v09 (1009)
    MD5HASH: 3dbf2739a9f78970438e31df8827374a

    UC-KERNEL-v09 (2009)
    MD5HASH: 867896e9e9f7d02445a1841c342a8179

    UC-KERNEL-v09 (3009)
    MD5HASH: f2f20d09a18c73801a998c56e055c5fe



    please do intensive testing and let us know ur feedback/reports!


    icon8.gif



    ENJOY!!!
    30
    UC Kernel v09 (test kernels) with FULL TOUCH RECOVERY released!


    [ Video ]




    [ changelog ]


    • Support for full touch recovery based on CWM


    [ NOTE ]

    • currently recovery does not show options for backup to or restore from internal sdcard though it deals with internal sdcard only.
    • if you do not want to take backup of sd-ext then use advanced backup.
    • We will release a final version soon with a single cpu table settings etc.

    [ download links ]


    KINDLY DO NOT MIRROR OUR FILES


    UC-KERNEL-v09 (1009)
    MD5HASH: 9b522d21b1063c277e29a4ce25889945

    UC-KERNEL-v09 (2009)
    MD5HASH: 5dc1d25a4b757000185b55f70c8dd2ad

    UC-KERNEL-v09 (3009)
    MD5HASH: 4227e873f00be76cc33c879280c98b15



    please do intensive testing and let us know ur feedback/reports!


    icon8.gif



    ENJOY!!!